Difference between revisions of "Mesh/WalkThrough"

Mesh/WalkThrough (view source)

440 bytes removed , 20:35, 4 May 2016

128

edits

@@ Line 150: / Line 150: @@
 * IP Address: 172.22.0.9
 * Netmask: 255.255.255.0
-* Gateway: 0.0.0.0 (or leave blank if error)
+* Gateway: 0.0.0.0
-Ubuntu users can reconfigure their network settings using the command line. In a separate terminal you will log into the node using these directions:
-Find the name of your ethernet port by running `ifconfig`
-  ifconfig
-In the example below, the wired Ethernet port was "eth0"
-In the terminal type the following, replacing "eth0" with the name of your Ethernet port:
-  sudo ip addr add 172.22.0.9/24 dev eth0
 === SSH into your Home Node ===