Difference between revisions of "Mesh/Mounting"

Jump to navigation Jump to search
1,734 bytes added ,  23:40, 2 March 2018
no edit summary
(→‎Safety Equipment: Adding clothing and footwear)
Line 43: Line 43:
* High Visibility Clothing
* High Visibility Clothing
* Work Boots
* Work Boots
== Copied from [[Mesh/Flashing_extender_node]] ===
For some reason, this was hiding at the very bottom of the extender node flashing guide,
=== Installation Order ===
#Flash home nodes and extender nodes
#Get on roof and determine which direction to face the extender nodes
#Install J-Pole
#Crimp end onto Ethernet cable
#Run Ethernet cable from j-pole down to location of home node (either through a soffit indoors or to an outdoor enclosure)
#Crimp other end of Ethernet cable and connect to home node via a POE adaptor
#Install extender node on J-Pole using zip-ties - check lights to make sure unit is powered up
#Walk around the neighborhood to check the signal
=== Gear Checklist ===
Protective and personal gear
*Wear clothes you can get dirty and sturdy boots for roof walking
*Sunscreen
*Sunglasses
*Pocketknife (for cutting zip ties etc)
*Ladder
*Safety harness & rope in a bucket
*Smart phone (to check signal and take pictures)
Home node gear
*2 flashed Western Digital Mynet N600 Home Nodes
*paperclip (to reset equipment)
*Laptop (to configure equipment)
*Plastic outdoor enclosure for router (optional)
*Power Strip
J-Pole gear
*J-Pole
*Latex gloves (for dealing with roofing sealant)
*Roofing sealant
*Ratchet set - 10mm for small bolts, 13mm for large bolts
*Corldless Drill
*3/16" drill bit for J-pole bolts
*Steel One-Hole Conduit Straps (for holding Ethernet cable along eves)
*Screws for the Steel one-hole straps
Ethernet cable gear
*Ethernet Spool
*Ethernet Ends
*Ethernet Crimper
*Laminated card showing the Ethernet cable order
*Label Maker - so you can know which cable is which
Extender node gear
*Flashed Ubiquiti Nanostation M2 or M5 extender Node(s)
*Power over Ethernet (POE) adapters
*Zip Ties
95

edits

Navigation menu