Difference between revisions of "Mesh/WalkThrough"

Jump to navigation Jump to search
9 bytes removed ,  16:39, 26 June 2018
(→‎Autoconf (v.0.3.0): added images)
Line 114: Line 114:
[[File:WifiSettings.jpg|frame|left|upright=2|Set your private SSID and password via the 'WIFi Settings' tab. NOTE: When you first set your private SSID name and hit 'Save', you will have to reconnect to the newly-named SSID using the original default password ('meshtheworld') and then reconnect again with the new password after setting it in the dashboard]] [[File:Connections.jpg|frame|right|upright=2|See all devices connected to your node via the 'Connections' tab]]
[[File:WifiSettings.jpg|frame|left|upright=2|Set your private SSID and password via the 'WIFi Settings' tab. NOTE: When you first set your private SSID name and hit 'Save', you will have to reconnect to the newly-named SSID using the original default password ('meshtheworld') and then reconnect again with the new password after setting it in the dashboard]] [[File:Connections.jpg|frame|right|upright=2|See all devices connected to your node via the 'Connections' tab]]


<br clear=all> Unless you installed [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers which autoconfigures, you will now need to use makenode ([[##Makenode|instructions further down]]) after flashing the sudowrt-firmware to your router to configure it to work on People's Open Network.
<br clear=all> If you installed autoconfiguring [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers, you will not need to use makenode ([[##Makenode|instructions further down]]) after flashing the sudowrt-firmware to your router to configure it to work on People's Open Network.


== Makenode (v.0.2.3 and earlier) ==
== Makenode (v.0.2.3 and earlier) ==
36

edits

Navigation menu