Bureaucrats, oversight, Administrators
1,196
edits
Difference between revisions of "Mesh/WalkThrough"
Jump to navigation
Jump to search
m
no edit summary
Tunabananas (talk | contribs) (added reset hole image) |
Tunabananas (talk | contribs) m |
||
| Line 104: | Line 104: | ||
== Autoconf (v.0.3.0) == | == Autoconf (v.0.3.0) == | ||
'''''Note: If you installed autoconfiguring [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers, you will not need to use makenode ([[##Makenode|instructions further down]]) after flashing the sudowrt-firmware to your router to configure it to work on People's Open Network.''''' | |||
[[File:Nodeports.jpg|100px|frame|right|Plug into port 3 to access the private network from your laptop. Port 2 connects to the public 'peoplesopen.net' network]] Connect your newly-flashed MyNet N600 to your existing Internet router via ethernet from your existing router's LAN port to your new node's Internet port. Wait a few minutes for your new node to connect to the Internet and obtain its private IP address, then try connecting to your unconfigured router by opening a browser and navigating to http://172.30.0.1 | [[File:Nodeports.jpg|100px|frame|right|Plug into port 3 to access the private network from your laptop. Port 2 connects to the public 'peoplesopen.net' network]] Connect your newly-flashed MyNet N600 to your existing Internet router via ethernet from your existing router's LAN port to your new node's Internet port. Wait a few minutes for your new node to connect to the Internet and obtain its private IP address, then try connecting to your unconfigured router by opening a browser and navigating to http://172.30.0.1 | ||
| Line 115: | Line 117: | ||
[[File:WifiSettings.jpg|frame|left|upright=2|Set your private SSID and password via the 'WIFi Settings' tab. NOTE: When you first set your private SSID name and hit 'Save', you will have to reconnect to the newly-named SSID using the original default password ('meshtheworld') and then reconnect again with the new password after setting it in the dashboard]] [[File:Connections.jpg|frame|right|upright=2|See all devices connected to your node via the 'Connections' tab]] | [[File:WifiSettings.jpg|frame|left|upright=2|Set your private SSID and password via the 'WIFi Settings' tab. NOTE: When you first set your private SSID name and hit 'Save', you will have to reconnect to the newly-named SSID using the original default password ('meshtheworld') and then reconnect again with the new password after setting it in the dashboard]] [[File:Connections.jpg|frame|right|upright=2|See all devices connected to your node via the 'Connections' tab]] | ||
<br clear=all> | |||
<br clear=all> | |||
== Makenode (v.0.2.3 and earlier) == | == Makenode (v.0.2.3 and earlier) == | ||