Difference between revisions of "Floor"

Jump to navigation Jump to search
1,378 bytes added ,  16:13, 11 April 2019
Added info on Rust-O-Leum EpoxyShield, and vinyl tiles
(→‎final: glitter proportions from video)
(Added info on Rust-O-Leum EpoxyShield, and vinyl tiles)
Line 23: Line 23:
* scrape gum & shit off
* scrape gum & shit off
* pressure wash or mop?
* pressure wash or mop?
** probably not needed if you're going to grind down to bare concrete anyway!
* let it dry
* let it dry
* grind/mill concrete down to the clean stuff
* grind/mill concrete down to the clean stuff
** rent professional concrete grinder with dust capture (or wet grinder). Grinding is a TON of work and can get very messy, so invest in good tools.
** acid etching w/ clean-n-etch stuff?
** acid etching w/ clean-n-etch stuff?
** rinsing?
** rinsing?
* fill deep gashes w/cement or plaster or epoxy
* fill deep gashes w/cement or plaster or epoxy
* box in area with wood
* box in area with wood
** only needed for the $$$ self-leveling stuff
* primer - soaks down, bonds with concrete (usually water based)
* primer - soaks down, bonds with concrete (usually water based)
** do we need the oil-stop kind? is there oil in our concrete?
** do we need the oil-stop kind? is there oil in our concrete?
Line 43: Line 46:
Brands:
Brands:
* Rust-O-Leum EpoxyShield (cheap at home depot, only 2 colors)
* Rust-O-Leum EpoxyShield (cheap at home depot, only 2 colors)
* Muscle Gloss (very expensive)
** $137 for a kit covering 500sqft. $411 for all of Sudo?
** Patrik used this for the small back lab in CCL, and was very satisfied with it. No noticeable odor whatsoever. Goes on like a thick paint, so easy to apply over uneven surfaces using a paint roller (no nail shoes or squeegee needed). Formulated for garage floors, so designed to be able to handle cars driven over it, or solvents spilled.
* Muscle Gloss (very expensive, and more finicky to apply)


Methods:
Methods:
Line 49: Line 54:
** "normally 4.5 gallons would cover 700sqft of concrete, but sand absorbs it, you'll need 2-3x as much" (so ~9 gallons for sudo)
** "normally 4.5 gallons would cover 700sqft of concrete, but sand absorbs it, you'll need 2-3x as much" (so ~9 gallons for sudo)
** 1lb glitter per gallon of epoxy
** 1lb glitter per gallon of epoxy
== Tile ==
BioCurious covered their old lab space with simple peel&stick vinyl tiles that they managed to get a deal on, at $0.25 per sqft - normally more like $0.40 per sqft. Cheapest at Home Depot is $0.63 per sqft. Adds up to $350-560 to cover all of Sudo.
Pro: doesn't require grinding down to bare concrete, which saves an enormous amount of work. Pressure wash should be plenty.
Con: Some of the tiles at BioCurious got damaged after only 1yr, especially over bumps and dents in the concrete which resulted in local wear on the tiles. Might be because of the dirt cheap tiles they used though. Also, repair is easy: just peel up damaged tile, and stick down another.
19

edits

Navigation menu