66
edits
Difference between revisions of "Big red laser cutter"
Jump to navigation
Jump to search
→Hardware Info
Andrewrgross (talk | contribs) (Added use instructions) |
Andrewrgross (talk | contribs) |
||
| Line 1: | Line 1: | ||
== | == General Info == | ||
The big red laser cutter is a no-name model using a Ruida 644XG control board. Its bed dimensions are about 730mm wide by 500mm deep. It looks like a 100 W CO2 laser. | The big red laser cutter is a no-name model using a Ruida 644XG control board. Its bed dimensions are about 730mm wide by 500mm deep. It looks like a 100 W CO2 laser. | ||
The Melbourne Makerspace has the same laser and have a [https://wiki.melbournemakerspace.org/Laser%20Cutter nicely written wiki page on it]. | The Melbourne Makerspace has the same laser and have a [https://wiki.melbournemakerspace.org/Laser%20Cutter nicely written wiki page on it]. | ||
''Be aware:'' lasers are very dangerous, particularly to eyes. Review these [https://ehs.mit.edu/workplace-safety-program/laser-cutter-safety/ safety guidelines], use eye protection, and carry an appropriate level of fear of the laser at all times. | |||
== Operation Instructions == | == Operation Instructions == | ||