240
edits
Difference between revisions of "Roofnode"
Created page with "Raspberry Pi 3 Model B with Power-Over-Ethernet hat, plugged in via ethernet cable directly to our router, which supplies 48v. Then a meshcore device and a meshtastic device are plugged into the Pi using USB cables. hostname: roofnode user: pi ip: 100.64.64.229 os: raspbian lite 64-bit (trixie) microsd card: 16gb == Setup Steps == * ssh pi@roofnode.local * https://github.com/meshcore-dev/meshcore_py * https://pypi.org/project/meshcore-cli/ <pre> sudo apt update su..."
(Created page with "Raspberry Pi 3 Model B with Power-Over-Ethernet hat, plugged in via ethernet cable directly to our router, which supplies 48v. Then a meshcore device and a meshtastic device are plugged into the Pi using USB cables. hostname: roofnode user: pi ip: 100.64.64.229 os: raspbian lite 64-bit (trixie) microsd card: 16gb == Setup Steps == * ssh pi@roofnode.local * https://github.com/meshcore-dev/meshcore_py * https://pypi.org/project/meshcore-cli/ <pre> sudo apt update su...") |
(No difference)
|