Difference between revisions of "Mesh/Flashing extender nodes"

Mesh/Flashing extender nodes (view source)

Revision as of 22:47, 6 May 2016

175 bytes added , 22:47, 6 May 2016

→‎TFTP with Official Firmware

Redconfetti

128

edits

@@ Line 88: / Line 88: @@
 ==== TFTP with Official Firmware ====
-You can download the official firmware image from Ubiquity - [https://www.ubnt.com/download/airmax-m/nanostationm/default/airos-xw-board-firmware-v564 airOS for XW board firmware v5.6.4]
+You can download the official firmware image from Ubiquity - [https://www.ubnt.com/download/airmax-m/nanostationm/default/airos-xw-board-firmware-v564 airOS for XW board firmware v5.6.4] - [http://dl.ubnt.com/firmwares/XW-fw/v5.6.3/XW.v5.6.3.28591.151130.1735.bin airOS for XW board firmware v5.6.3]
 Then you can start the TFTP server
@@ Line 110: / Line 110: @@
    Firmware Version: XW.ar934x.v5.6.4.28924.160331.1238
-The U-Boot version is now different
+This produces no change in the boot output. I try the v5.6.3 firmware.
+  Receiving file from 192.168.1.10:36771
+  Received 7293587 bytes
+  Firmware Version: XW.ar934x.v5.6.3.28591.151130.1735
+The TFTP client times out, but I wait for the firmware message on the serial output to change. Nothing happens. Reboot the device. No changes in the image detected.
-  U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)
-  DRAM:  64 MB
-  Flash:  8 MB (0xc2, 0x20, 0x17)
-  Net:   AR8236
-  eth0, eth1
-  Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030)
-  Radio: 0777:e855
-  Reset: Normal
-  Hit any key to stop autoboot:  0
    ## Booting image at 9f050000 ...
       Image Name:   MIPS Ubiquiti Linux-2.6.32.68
@@ Line 131: / Line 127: @@
       Verifying Checksum at 0x9f050040 ...OK
       Uncompressing Kernel Image ... OK
    Starting kernel ...