Difference between revisions of "Mesh/Flashing extender nodes"

Jump to navigation Jump to search
Line 88: Line 88:
==== TFTP with Official Firmware ====
==== TFTP with Official Firmware ====


You can download the official firmware image from Ubiquity - [https://www.ubnt.com/download/airmax-m/nanostationm/default/airos-xw-board-firmware-v564 airOS for XW board firmware v5.6.4]
You can download the official firmware image from Ubiquity - [https://www.ubnt.com/download/airmax-m/nanostationm/default/airos-xw-board-firmware-v564 airOS for XW board firmware v5.6.4] - [http://dl.ubnt.com/firmwares/XW-fw/v5.6.3/XW.v5.6.3.28591.151130.1735.bin airOS for XW board firmware v5.6.3]


Then you can start the TFTP server
Then you can start the TFTP server
Line 110: Line 110:
   Firmware Version: XW.ar934x.v5.6.4.28924.160331.1238
   Firmware Version: XW.ar934x.v5.6.4.28924.160331.1238


The U-Boot version is now different
This produces no change in the boot output. I try the v5.6.3 firmware.
 
  Receiving file from 192.168.1.10:36771
  Received 7293587 bytes
  Firmware Version: XW.ar934x.v5.6.3.28591.151130.1735
 
The TFTP client times out, but I wait for the firmware message on the serial output to change. Nothing happens. Reboot the device. No changes in the image detected.


  U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)
 
  DRAM:  64 MB
  Flash:  8 MB (0xc2, 0x20, 0x17)
  Net:  AR8236
  eth0, eth1
  Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030)
  Radio: 0777:e855
  Reset: Normal
  Hit any key to stop autoboot:  0
   ## Booting image at 9f050000 ...
   ## Booting image at 9f050000 ...
     Image Name:  MIPS Ubiquiti Linux-2.6.32.68
     Image Name:  MIPS Ubiquiti Linux-2.6.32.68
Line 131: Line 127:
     Verifying Checksum at 0x9f050040 ...OK
     Verifying Checksum at 0x9f050040 ...OK
     Uncompressing Kernel Image ... OK
     Uncompressing Kernel Image ... OK
 
 
   Starting kernel ...
   Starting kernel ...
    
    
128

edits

Navigation menu