128
edits
Difference between revisions of "Mesh/Flashing extender nodes"
Jump to navigation
Jump to search
→TFTP Serial Output
Redconfetti (talk | contribs) |
Redconfetti (talk | contribs) |
||
| Line 63: | Line 63: | ||
When booting with the reset button held down on a Ubiquity NSM5, the following output is displayed. | When booting with the reset button held down on a Ubiquity NSM5, the following output is displayed. | ||
U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20) | U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20) | ||
DRAM: 64 MB | DRAM: 64 MB | ||
Flash: 8 MB (0xc2, 0x20, 0x17) | Flash: 8 MB (0xc2, 0x20, 0x17) | ||
Net: AR8236 | Net: AR8236 | ||
eth0, eth1 | eth0, eth1 | ||
Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030) | Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030) | ||
Radio: 0777:e855 | Radio: 0777:e855 | ||
Reset: Normal | Reset: Normal | ||
Hit any key to stop autoboot: 0 | Hit any key to stop autoboot: 0 | ||
Setting default IP 192.168.1.20 | Setting default IP 192.168.1.20 | ||
Starting TFTP server... | Starting TFTP server... | ||
Using eth0 (192.168.1.20), address: 0x81000000 | Using eth0 (192.168.1.20), address: 0x81000000 | ||
Will reset device configuration (Reset button active after 10 seconds). | Will reset device configuration (Reset button active after 10 seconds). | ||
Erasing sector 123..126 | Erasing sector 123..126 | ||
First 0x7b last 0x7e sector size 0x10000 | First 0x7b last 0x7e sector size 0x10000 | ||
.... done | .... done | ||
Waiting for connection: \ | Waiting for connection: \ | ||
Receiving file from 192.168.1.10:49763 | Receiving file from 192.168.1.10:49763 | ||
Received 4325788 bytes | Received 4325788 bytes | ||
Firmware check failed! (1) | Firmware check failed! (1) | ||
==== TFTP with Official Firmware ==== | |||
You can download the official firmware image from Ubiquity - [https://www.ubnt.com/download/airmax-m/nanostationm/default/airos-xw-board-firmware-v564 airOS for XW board firmware v5.6.4] | |||
Then you can start the TFTP server | |||
ar7240> urescue | |||
Setting default IP 192.168.1.20 | |||
Starting TFTP server... | |||
Using eth0 (192.168.1.20), address: 0x81000000 | |||
Waiting for connection: | | |||
From your machine, configured as 192.168.1.10, use TFTP to upload the official image | |||
$ tftp 192.168.1.20 | |||
tftp> put XW.v5.6.4.28924.160331.1238.bin | |||
Transfer timed out. | |||
The file uploads, and as expected the image does not result in a firmware check error. | |||
Receiving file from 192.168.1.10:56564 | |||
Received 7296551 bytes | |||
Firmware Version: XW.ar934x.v5.6.4.28924.160331.1238 | |||
The U-Boot version is now different | |||
U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20) | |||
DRAM: 64 MB | |||
Flash: 8 MB (0xc2, 0x20, 0x17) | |||
Net: AR8236 | |||
eth0, eth1 | |||
Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030) | |||
Radio: 0777:e855 | |||
Reset: Normal | |||
Hit any key to stop autoboot: 0 | |||
## Booting image at 9f050000 ... | |||
Image Name: MIPS Ubiquiti Linux-2.6.32.68 | |||
Created: 2016-03-31 9:39:16 UTC | |||
Image Type: MIPS Linux Kernel Image (lzma compressed) | |||
Data Size: 955842 Bytes = 933.4 kB | |||
Load Address: 80002000 | |||
Entry Point: 80002000 | |||
Verifying Checksum at 0x9f050040 ...OK | |||
Uncompressing Kernel Image ... OK | |||
Starting kernel ... | |||
Booting Atheros AR934x | |||
=== USB to Serial Connection === | === USB to Serial Connection === | ||