Difference between revisions of "Mesh/WalkThrough"

190 bytes added ,  17:10, 26 June 2018
added reset hole image
(added reset hole image)
Line 50: Line 50:


== Reset your new N750/N600 router ==
== Reset your new N750/N600 router ==
[[File:Router_reset_mynet.png|200px|thumb|right|Reset hole location!]]
Instructions to reset / default a WD MyNet N600 or N750 router:
* Plug one end of the Ethernet cable into your laptop.
* Plug one end of the Ethernet cable into your laptop.
* Plug the other end of the Ethernet cable into one of the normal ports (LAN) on the router (not the Internet/WAN port).
* Plug the other end of the Ethernet cable into one of the normal ports (LAN) on the router (not the Internet/WAN port).
* With the router plugged in and power turned off, push a pin into the reset hole and hold it.
* With the router plugged in and power turned off, push a pin / paperclip / tiny screwdriver into the reset hole and hold it for at least 15 seconds.
* With the pin held down, turn on the router power button.
* With the pin held down, turn on the router power button.
* Watch the front blue light - they will flash on and off a few times.
* Watch the front blue light - they will flash on and off a few times.
1,187

edits