128
edits
Difference between revisions of "Mesh/WalkThrough"
Jump to navigation
Jump to search
adding additional post-setup link to home node info
Redconfetti (talk | contribs) (adding additional post-setup link to home node info) |
|||
| Line 121: | Line 121: | ||
* "private wifi password" - this is the password for the private wireless network that will run on this router - it must be at least 8 characters long | * "private wifi password" - this is the password for the private wireless network that will run on this router - it must be at least 8 characters long | ||
== Testing == | |||
After you're finished with the setup, you can do the following to test out your new home node. | |||
=== Network Settings === | |||
Reconfigure your machine to use the following network settings: | |||
* IP Address: 172.22.0.9 | |||
* Netmask: 255.255.255.0 | |||
* Gateway: 0.0.0.0 (or leave blank if error) | |||
Ubuntu users can reconfigure their network settings using the command line. In a separate terminal you will log into the node using these directions: | |||
Find the name of your ethernet port by running `ifconfig` | |||
ifconfig | ifconfig | ||
| Line 133: | Line 145: | ||
sudo ip addr add 172.22.0.9/24 dev eth0 | sudo ip addr add 172.22.0.9/24 dev eth0 | ||
=== SSH into your Home Node === | |||
Your home node is now running a Secure Shell (SSH) server. You can run the following command to attempt to log into your home node. | |||
ssh root@172.22.0.1 | ssh root@172.22.0.1 | ||
After accepting the key by entering 'yes' and pressing ENTER, it will ask you for a password, which is "meshtheplanet" | |||
If you'd like to add your ssh key to the router (instead of using a root password), add it to the `configs/authorized_keys` file. You'll see that there are 3 other keys there for our developers. You can remove them if you'd like, but they're currently the only way we can provide remote support. During the alpha test phase we ask that you consider whether you are able to do diagnostics/debugging yourself before you remove them. | If you'd like to add your ssh key to the router (instead of using a root password), add it to the `configs/authorized_keys` file. You'll see that there are 3 other keys there for our developers. You can remove them if you'd like, but they're currently the only way we can provide remote support. During the alpha test phase we ask that you consider whether you are able to do diagnostics/debugging yourself before you remove them. | ||
== Confirm that the Node is Running == | === Confirm that the Node is Running === | ||
Click on the network icon on the top right of the toolbar to see the | Click on the network icon on the top right of the toolbar to see the available wireless networks (or run <code>sudo iwlist wlan0 scan</code> in your Linux terminal) | ||
If configuration proceeded correctly, you should see the 'peoplesopen.net' and 'pplsopen.net-node2node' WIFI interfaces. | If configuration proceeded correctly, you should see the 'peoplesopen.net' and 'pplsopen.net-node2node' WIFI interfaces. | ||
At this point you're setup. For more information on using your node, such as accessing the web-based management interface, see [[Home and extender nodes#Home_nodes|Home node info]] | |||
= Flashing Extender Antennas = | = Flashing Extender Antennas = | ||