Bureaucrats, oversight, Administrators
1,196
edits
Difference between revisions of "Mesh/WalkThrough"
Jump to navigation
Jump to search
→Autoconf (v.0.3.0)
Tunabananas (talk | contribs) (updated with v.0.3 autoconf instructions) |
Tunabananas (talk | contribs) |
||
| Line 121: | Line 121: | ||
You can also SSH into the node as root using the password 'meshtheplanet' after connecting to the router either via the private SSID 'pplsopen-admin' (password 'meshtheworld') or by connecting an ethernet cable from your laptop to port 3 on the node: | You can also SSH into the node as root using the password 'meshtheplanet' after connecting to the router either via the private SSID 'pplsopen-admin' (password 'meshtheworld') or by connecting an ethernet cable from your laptop to port 3 on the node: | ||
[[File:Nodeports. | [[File:Nodeports.jpg]] | ||
Unless you installed [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers which autoconfigures, you will now need to use makenode ([[##Makenode|instructions further down]]) after flashing the sudowrt-firmware to your router to configure it to work on People's Open Network. | Unless you installed [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers which autoconfigures, you will now need to use makenode ([[##Makenode|instructions further down]]) after flashing the sudowrt-firmware to your router to configure it to work on People's Open Network. | ||
== Makenode (v.0.2.3 and earlier) == | == Makenode (v.0.2.3 and earlier) == | ||