Difference between revisions of "Mesh/WalkThrough"

Mesh/WalkThrough (view source)

453 bytes added , 17:39, 13 November 2019

→‎Upload sudowrt-firmware: added more instructions based on recent install experience.

625

edits

@@ Line 95: / Line 95: @@
 * Go to [http://192.168.1.1 http://192.168.1.1], if the reset was successful, you should see the following page:
 [[File:Screenshot from 2017-04-04 18-27-09.png|thumb|center|upright=2]]
+** If your reset was not successful, try debugging your network configuration described in the previous step.
+*** If you continue to have issues consider reloading network settings or restarting your computer.
+*** If you are still unable to access this firmware upload page, turn off your router and try to reset it again as instructed above.
 * Click 'Browse' and select the firmware file you downloaded
 * Click Upload and you will be taken to an exciting countdown timer:
 [[File:Screenshot from 2017-04-02 17-20-51.png|thumb|center|upright=2]]
+** Make sure not to disconnect or lose power at this stage, wait for the timer to complete.
-Note: Sometimes the firmware upload will not complete. After you click on 'Upload' You should get a page with a countdown of 120+ seconds. If this does not occur, reboot the router with the pin reset button depressed (as noted above), and try again.
+'''Note:''' Sometimes the firmware upload will not complete correctly. After you click on 'Upload' You should get a page with a countdown of 120+ seconds. If this does not occur, reboot the router with the pin reset button depressed (as noted above), and try again.
 = Configure =