Difference between revisions of "Low bandwidth disaster recovery mesh"

Jump to navigation Jump to search
no edit summary
 
Line 1: Line 1:
software implementation of data over radio using USRP:
(missing python scripts can be found on archive.org)


Stuff should go here.
http://www.wu.ece.ufl.edu/projects/wirelessVideo/project/GNU_Radio_USRP/
 
transmitting hardware (soundcard Left and Right for I/Q out to this thing)
 
http://www.na0tc.org/Homebrewing%20a%20HF%20Software%20Defined%20Radio_Final_pdf.pdf
 
actual transmitter schematic:
 
http://yu1lm.qrpradio.com/HAM%20HF%20SDR%20TRANSMITTER%20YU1LM.pdf
 
http://yu1lm.qrpradio.com/FINAL%20HF%20SDR%20RECEIVERS%20TRANSMITTER%20YU1LM.pdf


programmable frequency generator:


http://www.wu.ece.ufl.edu/projects/wirelessVideo/project/GNU_Radio_USRP/
https://www.sparkfun.com/products/9089
 
high frequency capable 4066 chip from mouser for above transmitter:
 
http://www.mouser.com/ProductDetail/NXP-Semiconductors/74LVC4066PW118/?qs=sGAEpiMZZMvjbjwkTuU2aWr3jA9LyhiebMD5MB9f6DQ%3d
 
that chip could be used in the same schematic from my previous link by yu1lm to be able to transmit at higher frequencies, probably up to about 200MHz

Navigation menu