New pages
Jump to navigation
Jump to search
- 09:05, 9 April 2025 Monoprice Mini V1 (hist | edit) [1,168 bytes] Paigep (talk | contribs) (Created page with "thumb = Printer Status = Unknown =Slicer settings = There is no printer profile for the MP10 mini in modern slicers, so you must manually set it up. == Start G-code (sent via email from monoprice): == <pre> G28 ;(Home all axes) G21 ;(metric values) G90 ;(absolute positioning) M82 ;(set extruder to absolute mode) M107 ;(start with the fan off) M104 S[first_layer_temperature] ; set extruder temp M140 S[first_layer_bed_temperature] ; set bed temp...")
