- mesh - sudoroom.org

Freifunk & GSoC 2016 - Participation and Ideas List

by Andreas Bräu

9 years, 8 months

1
0
0 0

Open source wifi router for crisis situations using atheros wifi

by Valent Turkovic

Hi all, I'm one of people who started www.meshpoint.me - idea is to build open source wifi router that can be easily deployed in any type of crisis situations. I have been setting up wifi networks in crisis situations and I know that there are no devices that are usable in crisis situations. Belive it or not but first responders usually aren't network admins :) So that is why we started developing MeshPoint, wifi device that anybody can use in crisis situation. First iteration will use off the shelf components and later we plan develop our own wifi router board using atheros hardware. Our current design (as you can see on the web site) uses three TP-LINK WR842ND (AR9341) boards in 3D printed case. Our concern is that this could generate too much interference and cause too much L2 retransmissions because of co-channel interference. We are using latest OpenWrt 15.04 Chaos Chalmer and ath9k driver and would like to know if it is possible to extract metrics that shows number or L2 retransmissions. Do mac80211 or ath9k tracks L2 retransmission statistics? How can we get those metrics if they do? >From my research up to 5-10% of L2 retransmission is just fine, but anything over that is cause for great concern. Is there any other metric that you would suggest we track that would show some issues due to wifi interference? Is there anyway to get AR9341 datasheet? Cheers, Valent.

9 years, 8 months

4
5
0 0

Is there a good night to drop in on the sudoroom?

by Dave Taht

I am in california briefly (for a conference) but have time free after thursday. -- Dave Täht Let's go make home routers and wifi faster! With better software! https://www.gofundme.com/savewifi

9 years, 8 months

3
5
0 0

Exit server downtime

by Max B

Hey folks, There's gonna be an hour or so of network downtime tonight. I just got an email from digital ocean saying that we've received too many dmca complaints and that they're gonna bring down our server until I respond to the latest one. I'm out of the house for the next hour and I don't know that I can deal with it until I get back. Sorry about this - I'm gonna try to get this fixed asap and avoid this moving into the future. Thanks, Max

9 years, 9 months

1
1
0 0

Fwd: [wlan-si dev] Outdoor wifi router comparison matrix

by Mitar

Hi! Feel free to contribute. Mitar -------- Forwarded Message -------- From: Valent Turkovic <valent(a)otvorenamreza.org> Subject: [wlan-si dev] Outdoor wifi router comparison matrix To: development(a)wlan-si.net <development(a)wlan-si.net> Hi all, I'm writing comparison matrix between different outdoor wifi routers, any comments or suggestion are welcome: https://docs.google.com/spreadsheets/d/1TAqBaqCuS1vMnrpGoVNim9LVQfVovkr60fg… Would you add some feature? Remove some? Add some device you believe should be on this list? Are prices correct? Cheers, Valent. -- http://mitar.tnode.com/ https://twitter.com/mitar_m

9 years, 9 months

1
0
0 0

I have given up the idea that we can win this fight for the internet

by Mitar

Hi! A great read: http://motherboard.vice.com/read/pirate-bay-founder-peter-sunde-i-have-give… Mitar -- http://mitar.tnode.com/ https://twitter.com/mitar_m

9 years, 9 months

4
7
0 0

Chip - WiFi computer for $8

by Mitar

Hi! Anyone ordering them? http://getchip.com/pages/chip Mitar -- http://mitar.tnode.com/ https://twitter.com/mitar_m

9 years, 10 months

3
2
0 0

Building Blocks for Kids and Oakland Technology Exchange Technology Fair Sat Nov 21st

by max b

Hey folks, I wanted to let everyone know about this event that will be happening in Richmond this Saturday, Nov 21st. Sudomesh/peoplesopen.net is a co-sponser and will have a table there. I don't have a particularly good idea of what it will look like, but I do have a ton of respect for the work that BBK and OTX do and it'll be a really good opportunity to see what grassroots digital literacy work looks like. The fair will be at: Building Blocks for Kids 312 9th St, Richmond, CA 94801 (a pretty short walk from the BART station) 11/21/2015 10am - 1pm. We were asked to show up at 9am to prepare for tabling, etc. I'll be there to bottom line it, but if other folks want to show up and talk about sudomesh/peoplesopen.net I'd love the company. Facebook event: https://www.facebook.com/events/403105796565832/ Thanks! Max

9 years, 10 months

1
0
0 0

THURSDAY: Design for imperfect manufacturing and challenges of making wireless optical system KORUZA

by Jenny Ryan

Stop by sudo this Thursday at 8pm and meet Musti, inventor of the open hardware optical wireless system KORUZA <http://koruza.net>. KORUZA is a 1Gbps wireless optical system for locations up to 100m apart, using an eye-safe infrared light beam. A low cost, open source and open hardware, wireless optical system, making the free space optical (FSO) technology available to masses and providing an alternative to Wi-Fi networks for RF spectrum congested urban areas. *Design for imperfect manufacturing and challenges of making wireless optical system KORUZA* Complicated and precise systems can be designed more smartly with imperfect tools and machines, demonstrated by the example of KORUZA, a low-cost wireless optical and open source open-hardware system for gigabit 100m wireless communication in urban areas. Motivation for developing this project comes from Wi-Fi, which is the most popular choice for creating low-cost networks these days. However, a large number of such networks fail to co-exist in urban environments due to RF spectrum congestion. KORUZA solves this problem by using a highly collimated optical beam for bi-directional communication. In this talk I will discuss the use of 3D printing for development of precise optical setup with imperfect parts, how to design a system using and re-purposing mass-produced off-the-shelf components, discuss impacts of setting up a global distributed experiment World Wide Koruza l experiment and observing the developed product in real-life. I will also demonstrate the latest KORUZA 1.0 prototype now suitable to make wireless optical gigabit links between buildings. *Bio:* Luka Mustafa is a Shuttleworth Foundation Fellow and working full-time on developing the wireless optical system, KORUZA, at Institute IRNAS Rače in Slovenia, which he founded in 2014. He is also working on his PhD at University College London. For the past year he has led a keen young team at IRNAS to develop open hardware manufacturing solutions ranging from precise 3D printing of plastics and other more unusual materials to large-scale CNC and plasma cutters for heavier metalwork, innovating on the use of optical fibres for these applications. He promotes and deploys open wireless networks with the "wlan slovenia" project, manages national and international wireless backbones and contributes to several open-hardware and electronics projects worldwide. He has wide experience interning on projects from sound-systems to particle accelerator control systems. ( http://koruza.net ) Sudo Calendar: https://sudoroom.org/events/design-for-imperfect-manufacturing-and-challeng… Facebook Event: https://www.facebook.com/events/427453017463929/ Can't make it this Thursday? You can also attend KORUZA event at Noisebridge on the 16th: https://www.noisebridge.net/wiki/Noisebridge_Koruza_event

9 years, 10 months

3
4
0 0

Fwd: [eecs-announce] BiD Seminar (11/10) Luka Mustafa on Design for imperfect manufacturing and challenges of making wireless optical system KORUZA

by Mitar

Hi! If you want to learn more about WiFi technologies, Internet, lasers, and 3D printers. :-) Mitar -------- Forwarded Message -------- From: Andrew Head <andrewhead(a)berkeley.edu> Subject: [eecs-announce] BiD Seminar (11/10) Luka Mustafa on Design for imperfect manufacturing and challenges of making wireless optical system KORUZA Please join us (Tuesday (11/10) for the next installment of the Fall Seminar 2015 Berkeley Institute of Design Weekly Seminar, featuring Luka Mustafa from Institute IRNAS Rače in Slovenia. Tuesday 12pm - 1pm, 10 November 2015 Berkeley Institute of Design (BiD) Lab 354/360 HMMB Don't know where BiD is? No problem: Directions <http://bid.berkeley.edu/directions> *Title:* Design for imperfect manufacturing and challenges of making wireless optical system KORUZA *Abstract*: Complicated and precise systems can be designed more smartly with imperfect tools and machines, demonstrated by the example of KORUZA, a low-cost wireless optical and open source open-hardware system for gigabit 100m wireless communication in urban areas. Motivation for developing this project comes from Wi-Fi, which is the most popular choice for creating low-cost networks these days. However, a large number of such networks fail to co-exist in urban environments due to RF spectrum congestion. KORUZA solves this problem by using a highly collimated optical beam for bi-directional communication. In this talk I will discuss the use of 3D printing for development of precise optical setup with imperfect parts, how to design a system using and re-purposing mass-produced off-the-shelf components, discuss impacts of setting up a global distributed experiment World Wide Koruza experiment and observing the developed product in real-life. I will also demonstrate the latest KORUZA 1.0 prototype now suitable to make wireless optical gigabit links between buildings. *Bio: * Luka Mustafa is a Shuttleworth Foundation Fellow and working full-time on developing the wireless optical system, KORUZA, at Institute IRNAS Rače in Slovenia, which he founded in 2014. He is also working on his PhD at University College London. For the past year he has led a keen young team at IRNAS to develop open hardware manufacturing solutions ranging from precise 3D printing of plastics and other more unusual materials to large-scale CNC and plasma cutters for heavier metalwork, innovating on the use of optical fibres for these applications. He promotes and deploys open wireless networks with the "wlan slovenia" project, manages national and international wireless backbones and contributes to several open-hardware and electronics projects worldwide. He has wide experience interning on projects from sound-systems to particle accelerator control systems. *Website:* http://koruza.net [image: Musti] -- http://mitar.tnode.com/ https://twitter.com/mitar_m

9 years, 10 months

1
0
0 0

Open networks and NSA

by Mitar

Hi! Great talk: http://www.ted.com/talks/mathias_jud_art_that_lets_you_talk_back_to_nsa_spi… Mitar -- http://mitar.tnode.com/ https://twitter.com/mitar_m

9 years, 11 months

1
0
0 0

#ISO parking space, will donate $50 to Omni.

by danarauz＠gmail.com

Hello All, I am going in a trip from Nov. 3rd to the 11th and I have no place to park my car for that length of time. If someone in the list living near BART would allow me to park in their driveway or similar; between Richmond to SF Airport I would donate $50 to Omni (https://omnicommons.org/donate.html). It will make me happier knowing that I am donating that money Omni, besides that it will way cheaper than paying the airport! I would share the receipt of my donation with you. Many thanks in advance, Daniel p.s. please feel free to email me directly to my email or ask me for my number if you prefer to call. Thx! -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years, 11 months

1
1
0 0

Sudomesh General Meeting Tomorrow, Tues Oct 27th - We need node hosts!

by max b

Our last Tuesday of the month general meeting is tomorrow, Tuesday October 27th at the Omni! We've been busy alpha testing the network and have been getting some promising results! More info on that process can be found here: https://sudoroom.org/wiki/Mesh/Blog#Alpha_Testing_Network We're especially interested in finding a handful of new folks who would want to host nodes. If you're willing to share some of your home bandwidth, generally reliable, and interested in our project, it's a great way to learn about the network while helping us out a lot with very little initial investment! If you're able to email me in advance of the meeting letting me know that you're interested in hosting a home node, that would be especially helpful, but if not that's ok too. We take notes of our meetings (which everyone is encouraged to check out even if you're not in attendance) here: http://pad.sudomesh.org Feel free to add agenda items if there are things you want to bring up/ask/etc. We're also generally on IRC on freenode servers in channel #peoplesopen.net For information on how to join, check out https://sudoroom.org/wiki/Mesh#Join_Us Hope to see you there!

9 years, 11 months

1
0
0 0

IDEA: How to bring bits of money to Omni. Easy Way.

by danarauz＠gmail.com

Hello All! Straight to the point: Instead of going to buy a new/used piece of furniture or whatever item from a store, one should ask in their Collecive and or the Omni email list(s). So if a member has it, then the two parties involved will decide the amount of money that the person receiving the item should donate to Omni. This idea is not inclusive to items, it could include services. For example (a real example): I am going in a trip for 11 days (Nov 3 - 11), and I have no place to park my car for that length of time. If I use the parking lot at the airport, it will cost me $18 a day making it a total of $198 plus tax. But, I would be happier if someone in the list living near BART would allow me to park in their driveway or similar; from anywhere in Richmond to North Oakland, or from SF to the SF Airport so that I would donate $50 to Omni. The person doing the monetary donation could do it in person or use the any of these methods online: https://omnicommons.org/donate.html What are your thoughts? Many thanks for reading this email. Daniel p.s. i will send another email with my real #ISO request as an example of what I mean, and perhaps I get some replies. -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years, 11 months

3
2
0 0

Telehash

by Mitar

Hi! I think I found it some time ago, but I found it now again: https://github.com/telehash/telehash.org/blob/master/v3/intro.md Mitar -- http://mitar.tnode.com/ https://twitter.com/mitar_m

9 years, 11 months

1
0
0 0

Fwd: dan gillmor nails why I just did what I did

by Mitar

Hi! Good thoughts. Mitar -------- Forwarded Message -------- From: Dave Taht <dave.taht(a)gmail.com> Subject: dan gillmor nails why I just did what I did From: http://www.slate.com/blogs/future_tense/2015/10/15/trans_pacific_partnershi… "Surely our government isn't insane enough to thwart research designed to keep us safer in the emerging “Internet of Things.” Yet tell that, for starters, to the automobile industry, where one of the world's largest car makers, Volkswagen, cheated on emissions testing by tweaking its software. This crime against humanity—not an exaggeration, given the massive contribution this may have made to accelerating climate change—was discovered by researchers who, by good luck, discovered that VW's cars had been spewing vastly more pollutants than the company claimed for years. This almost certainly would have been uncovered much earlier had the industry not relied on the Digital Millennium Copyright Act to “protect” its software from analysis; the DMCA made it illegal to circumvent “digital restrictions management.” Yet the automakers continue to adamantly oppose any exception to the DMCA. This TPP provision, assuming it's in the final document—won't it be great when our government allows us to actually see it?—is just one of the many, many terrible “intellectual property” arrangements aimed at giving corporations greater control over their customers. When software is part of a product, as it is in so many things today and almost everything tomorrow, the very concept of ownership becomes an abstraction for the alleged buyer. And when we risk harsh penalties for even attempting to repair a device that's defective, whether that's because of the seller's incompetence or venality, we are in a totally untenable, and frighteningly insecure, position. We need to be going in precisely the opposite direction, and a too-little-noticed proposal this week shows how it might be done. A group of security experts looked into the absolutely horrifying, and willful, lack of security in devices most of us use every day—especially the Wi-Fi routers that let us share one Internet connection among a variety of devices—and asked the Federal Communications Commission to intervene. In a letter to the FCC and a press release explaining their goals, more than 250 people, including Vint Cerf, one of the Internet's creators, implored the agency to make these crucial devices more secure by forcing manufacturers to be more open about how they work. Among other things, the security experts asked the FCC to require that device makers a) provide public access to “source code”—the programming instructions that operate the device—so that it can be analyzed; b) provide ongoing security updates in timely ways; and c) be prevented from selling devices that don't comply with those and other rules designed to ensure security. The FCC should make this happen yesterday. Then, regulators and Congress should extend the compelling logic of this proposal to other devices—notably cars and mobile phones—that are notoriously riddled with flaws. Meanwhile, it's vital that Congress not agree to the TPP as it's currently written. Thankfully, the deal is in trouble. Let's hope the odd-couple combination of a corporate-dominated Obama administration and a Republican-controlled Congress doesn't override common sense and the public good." Scientists and Engineers have a mandate to obey physical law. Lawyers, and lobbyists, not so much. Dave Täht I just lost several years of my life to making wifi better. And the FCC wants to mess all that up. https://www.gofundme.com/savewifi -- http://mitar.tnode.com/ https://twitter.com/mitar_m

9 years, 11 months

1
0
0 0

(Today Friday 9AM ) videoconference on the fcc vs open firmware

by danarauz＠gmail.com

---------- Forwarded message ---------- From: Dave Taht <dave.taht(a)gmail.com> Date: Thu, Oct 15, 2015 at 6:35 PM Subject: [FCC] videoconference on the fcc vs open firmware friday To: bufferbloat-fcc-signers(a)lists.redbarn.org, fcc(a)lists.prplfoundation.org, make-wifi-fast(a)lists.bufferbloat.net, bloat <bloat(a)lists.bufferbloat.net>, Battle of the Mesh Mailing List <battlemesh(a)ml.ninux.org> announcement here. https://plus.google.com/u/0/events/cp7g87eq2g5fde8b8i5bn2p8oo0 -- Dave Täht Do you want faster, better, wifi? https://www.patreon.com/dtaht _______________________________________________ FCC mailing list FCC(a)lists.prplfoundation.org http://lists.prplfoundation.org/cgi-bin/mailman/listinfo/fcc -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years, 11 months

1
0
0 0

Exit Server Updates

by max b

I'm thinking that I'd like to do some updates/maintenance to the (dev alpha test) exit server tonight. Does anyone have any objections/time concerns? I was thinking probably midnight tonight (Thurs 10/15). I know it's a little late notice, but I think it may help with some of the issues we've been experiencing. If everything goes correctly, it should be about 15 min of downtime around midnight. Thanks! Max

9 years, 11 months

2
1
0 0

Fwd: BREAKING: TPP text leaked

by danarauz＠gmail.com

Hello All, Below a forward email I received today from Fight for the Future in case you interested on reading it; or at least please notice this item: *"Make it illegal to unlock, modify, or generally tinker with a device you own. (Article QQ.G.10)"* "Check it out on WikiLeaks here <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…>, or read their overview of it here <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…> ." Thank you all of you in these lists that are trying to make this world a better world to live. I sincerely appreciate it your efforts. Daniel ---------- Forwarded message ---------- From: Charlie from FFTF <info(a)list.fightforthefuture.org> Date: Thu, Oct 15, 2015 at 9:16 AM Subject: BREAKING: TPP text leaked To: danarauz(a)gmail.com *Last week, WikiLeaks released the final text of the TPP’s intellectual property rights chapter and it is absolutely terrifying.* *These are just a few of its most dangerous pieces:* - Compel ISPs to take down websites without any sort of court order, just like SOPA. (Appendix Section I) - Extend the US’s copyright regime to require copyrights stand for life plus 70 years, preventing anyone from using works that belong in the public domain. (Article QQ.G.6) - Criminalize whistleblowing by extending trade secrets laws without any mandatory exemptions for whistleblowers or investigative journalists. (QQ.H.8) - End anonymity online by forcing every domain name to be associated with a real name and address. (Article QQ.C.12) - Make it illegal to unlock, modify, or generally tinker with a device you own. (Article QQ.G.10) - Export the US’s broken copyright policies to the rest of the world without expanding any of the free speech protections, like fair use. (Article QQ.G.17) *The worst part is that this is just one of the TPP’s 30 chapters. * *The final text confirms our worst fears — click here to take action demanding Congress vote NO on the TPP. <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…>* For years, governments have held critics of the massive Trans-Pacific Partnership agreement in a perfect catch 22. Officials brushed off public outcry and concern by claiming that the dissenters didn’t have all the facts. This was by design—the 12 country trade deal was negotiated entirely behind closed doors by industry lobbyists and government appointees, and even now the text of the agreement is still classified. But late last week, WikiLeaks released the final text of the Intellectual Property chapter, meaning those excuses won’t work anymore. *We’re planning to go all out against the TPP, but the first step is to make sure Congress knows just how many people oppose the TPP. * *Click here to take action demanding Congress vote NO on the TPP. <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…>* Taking action today is just the beginning, because if all we do is send emails and make phone calls, Congress is not going to reject the TPP. Too many giant industries are seriously invested in making sure Congress ratifies the TPP. *If we’re going to win, we need to go big. Which is exactly what we’re going to do.* *So take action right now. Contact your Congresspeople now and tell them to vote against the TPP <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…>*. Then get ready to do more because we’re going to unleash some of our strongest campaigns ever. Already we have plans to work with hundreds of different groups as a massive coalition to fight the TPP, coordinate gigantic on-the-ground protests in key cities across the country, and produce compelling content to spread the word to as many different audiences as possible just what is at stake in the TPP. *To do all that, we need your help — if you can, pledge to chip in $5 every month between now and when the TPP fight ends so that we can run our biggest, boldest, and best campaign yet. <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…>* Thanks for all you do, Charlie P.S. Want to read the text of the chapter for yourself? Check it out on WikiLeaks here <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…>, or read their overview of it here <http://list.fightforthefuture.org/mpss/c/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…>. It’s long and complicated, so maybe you'll see something that we didn't. If you do, send us an email. (If you would like to unsubscribe, click here <http://list.fightforthefuture.org/mpss/u/2wA/ZgwNAA/t.1ra/JRRvvf--QMGuoqxOh…> .) -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years, 11 months

1
0
0 0

Fwd: Setting up an experimental testbed for wireless mesh network

by Sailash Moirangthem

---------- Forwarded message ---------- From: Sailash Moirangthem <sailashm(a)gmail.com> Date: Wed, Oct 14, 2015 at 10:03 PM Subject: Setting up an experimental testbed for wireless mesh network To: mesh-owner(a)lists.sudoroom.org Thank you all for creating such a wonderful group. I am a student studying Digital Communications in India. I am trying to set up a wireless mesh network covering the whole campus of our college. I have currently 10 routers (TPLINK WN1043ND) updated with openwrt. I have been trying to run the BATMAN-ADV and 802.11s protocols in these routers, but unable to do so. Once set-up, my objective is to use it for video-surveillance system. The following configuration is what I want: Node1: 192.168.99.25 Node2: 192.168.99.26 and so on..till Node15 I have followed the steps in http://www.radiusdesk.com/technical_discussions/batman_basic completely, but it still doesn't work. Please help. It would be helpful if the configuration files for setting up mesh with 802.11s (HWMN) can be given.

9 years, 11 months

1
0
0 0

Node 0 is up and running on a new connection!

by Pete Forsyth

All: As of yesterday, we have a new Internet connection originating at my house <http://map.sudomesh.org/select/phorzaith/>, and shared with Jake's and Marc's (is that LiveLabs2? Y'all ain't on the map!) and other neighbors. There are a few significant bits of news here. I may be repeating myself on some of this: - We're using Megapath business services as our ISP. In our case, they're reselling Comcast cable service -- the only reasonable/available option here. They are good because (1) there is no restriction on sharing or even reselling service; (2) it includes a Service Level Agreement, i.e. guaranteed uptime threshold. All that (especially #2) means that it's somewhat more expensive than other options, but we don't care -- it fits our needs. And having at least one node we can talk about very publicly, without fear of ISP objections, seems very worthwhile. - The account is in Sudo Mesh's name, meaning that we could theoretically set up additional nodes. (But in practice, I will be paying the bills and collecting others' share -- so let's only do that if we have rock-solid payment processes in place first.) - We're dividing this up in an interesting way, that might be a useful model. Marc and I are serving as "primary node sponsors" because we each rely on the connection for our work. We are taking responsibility for making sure the bill gets paid, even if others don't participate. In addition, we have up to four other households (in my house and next door) that we hope to join in, paying $30/month each. All have agreed at least tentatively. And if they do participate, we can extend the availability of the free #peoplesopen.net SSID from their homes too! The neighbors like both the idea of cheap Internet, and the idea that they are helping promote a social good. - I wrote up a one-page explanation for those neighbors. I'll post a sanitized version of it on the wiki soon; hopefully it can help serve as a model for other neighbor arrangements. - As it turned out, one of the neighbors (Frank) had FOUND the free WiFi node already, canceled his ISP, looked up the People's Open web site, and was enthusiastic about the idea before I even brought it up to him! He also paid his first month proactively, as soon as I suggested the idea. So, this is a good indication that our idea is working!! Thought you'd all enjoy knowing about this. Please feel free to hit me up with questions or ideas! -Pete [[User:Peteforsyth]] on the wiki

9 years, 11 months

3
3
0 0

Write FCC letter

by Marc Juul

We should all sit down and write a letter from sudo mesh to the FCC tomorrow? -- marc/juul

9 years, 11 months

5
14
0 0

Article in Oakland North

by Jeremy Entwistle

Jennifer, Thank you for your article highlighting the issues with the proposed FCC rules. I'm sending this out to our mailing list and if you have any questions or if you need any other information, I or somebody else would be willing to talk to you in person. https://oaklandnorth.net/2015/10/08/fcc-rule-threatens-oakland-mesh-network… Thank you again, Jeremy Entwistle

9 years, 11 months

2
1
0 0

Probably not useful for sudomesh, but very interesting

by Jehan Tremback

https://pdos.csail.mit.edu/papers/roofnet:exor-sigcomm05/roofnet_exor-sigco…

9 years, 12 months

1
0
0 0

Right now live streaming "Becoming Omni": https://hangouts.google.com/call/ge2wsl2eru5t5otyxnhrwlsxgea

by danarauz＠gmail.com

"Becoming Omni" Please joing the google hangout here - https://hangouts.google.com/call/ge2wsl2eru5t5otyxnhrwlsxgea -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years, 12 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

mesh