[Mesh] Firmware update

Today I flashed the first router with sudomesh firmware and used the node-configurator to set it up. After fixing a few bugs, it now comes up mostly correctly after configuration(!) Here are the remaining ToDos that I feel we need to deal with before I feel we can "ship" this as an initial launch: * The simplified web gui does not allow me to log in. Trying to log in as root gives the error "The CGI process did not produce any response" * Change meshrouting script to establish NAT between mesh and private wifi network. * Add upstream traffic control to tunneldigger hook script. * Hook web gui into batman-adv and tunneldigger for changes to shared internet bandwidth. * Ensure that exit and relay nodes are configured correctly. * Change MTU on interfaces to make batman happy. Max: Any idea about the web gui error? Also, if you're trying to work with node-configurator, remember that the client only trusts the certificate included in the firmware here: https://github.com/sudomesh/openwrt-firmware/blob/master/files/etc/nodeconf… The node-configurator client will refuse to connect to anything that doesn't have a cert signed by that root ca. Easiest solution for testing is to use the script included with node-configurator to generate your own root cert, copy that over the existing root cert in openwrt-firmware and re-run make in built_firmware/builder.atheros -- marc/juul