Skywalker Signature Series non-penetrative chimney mount is on its way to
me!
On Tue, Sep 26, 2017 at 8:38 AM, Adam Longwill <adam.longwill(a)metamesh.org>
wrote:
These masts are often adequate, but there are further
solutions that you
all should be aware of. In older, brick buildings, the bricks can sometimes
disintegrate when being drilled in to. For cases like this, and for anyone
who is adamant that you *not* drill into their building, use the
non-penetrative chimney mount here:
https://smile.amazon.com/Solid-Signal-Antenna-Chimney-
Y-mount/dp/B00X01FCTK/ref=sr_1_1_sspa?ie=UTF8&qid=1506440094&sr=8-1-spons&
keywords=chimney+mount&psc=1
This wraps around the chimney and accomodates different sized masts up to
about 2.5 inches in diameter. We use 2 inches which seems perfect. We use
galvanized steel conduit from your local big hardware store. This conduit
comes in 10 foot increments by default and allows you to have a higher,
more stable setup that can be loaded with more equipment.
Setting these non-penetrative chimney mounts up is a bit tricky so watch a
video on how to do it- and bring HEAVY work gloves as each metal band is
basically one big razor blade.
Adam Longwill
On Mon, Sep 25, 2017 at 9:56 PM, G Gallo <ggallo102(a)gmail.com> wrote:
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh