23 Jan
2017
23 Jan
'17
6:15 p.m.
As part of the new node dashboards, we need to gather info from the nodes
and pass it to the frontend dashboard app. There were some shell scripts
but they weren't very complete and I couldn't find them yesterday, so I sat
down to learn awk. Awk is very graceful for parsing data out of text, but I
found it cumbersome generating json from the data in its memory.
SO I just did it with Go. Go compiles to machine code that will run easily
on the routers (unlike js). Also, it will be good for doing other things to
build up the data, like pinging endpoints etc. Here is the repo:
https://github.com/sudomesh/node-info-go
I will be at the meeting tomorrow to talk about how to harvest the rest of
the data we need to build a full dashboard.
-Jehan
23 Jan
23 Jan
6:19 p.m.
Oh yea, here's what it outputs right now:
{
"Interfaces":{
"eth0":{
"Neighbors":{
"10.0.0.2":{
"Routes":{
"10.0.0.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.2"
},
"10.0.0.6":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.6"
}
}
},
"10.0.0.3":{
"Routes":{
"10.0.0.1":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.1"
},
"10.0.0.3":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.3"
},
"10.0.1.0/24":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.0/24"
},
"10.0.1.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.2"
},
"default":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"default"
}
}
},
"10.0.0.5":{
"Routes":{
"10.0.0.5":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.5",
"Destination":"10.0.0.5"
}
}
}
}
}
}
}
On Mon, Jan 23, 2017 at 6:15 PM, Jehan Tremback <jehan.tremback(a)gmail.com>
wrote:
As part of the new node dashboards, we need to gather
info from the nodes
and pass it to the frontend dashboard app. There were some shell scripts
but they weren't very complete and I couldn't find them yesterday, so I sat
down to learn awk. Awk is very graceful for parsing data out of text, but I
found it cumbersome generating json from the data in its memory.
SO I just did it with Go. Go compiles to machine code that will run easily
on the routers (unlike js). Also, it will be good for doing other things to
build up the data, like pinging endpoints etc. Here is the repo:
https://github.com/sudomesh/node-info-go
I will be at the meeting tomorrow to talk about how to harvest the rest of
the data we need to build a full dashboard.
-Jehan
6:30 p.m.
Alright! I hadn't considered go but as long as it compiles to the processor
on the routers we use then that does simplify things quite a bit :)
On Mon, Jan 23, 2017 at 6:19 PM, Jehan Tremback <jehan.tremback(a)gmail.com>
wrote:
Oh yea, here's what it outputs right now:
{
"Interfaces":{
"eth0":{
"Neighbors":{
"10.0.0.2":{
"Routes":{
"10.0.0.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.2"
},
"10.0.0.6":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.6"
}
}
},
"10.0.0.3":{
"Routes":{
"10.0.0.1":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.1"
},
"10.0.0.3":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.3"
},
"10.0.1.0/24":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.0/24"
},
"10.0.1.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.2"
},
"default":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"default"
}
}
},
"10.0.0.5":{
"Routes":{
"10.0.0.5":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.5",
"Destination":"10.0.0.5"
}
}
}
}
}
}
}
On Mon, Jan 23, 2017 at 6:15 PM, Jehan Tremback <jehan.tremback(a)gmail.com>
wrote:
As part of the new node dashboards, we need to
gather info from the nodes
and pass it to the frontend dashboard app. There were some shell scripts
but they weren't very complete and I couldn't find them yesterday, so I sat
down to learn awk. Awk is very graceful for parsing data out of text, but I
found it cumbersome generating json from the data in its memory.
SO I just did it with Go. Go compiles to machine code that will run
easily on the routers (unlike js). Also, it will be good for doing other
things to build up the data, like pinging endpoints etc. Here is the repo:
https://github.com/sudomesh/node-info-go
I will be at the meeting tomorrow to talk about how to harvest the rest
of the data we need to build a full dashboard.
-Jehan
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
24 Jan
24 Jan
1:22 a.m.
Have you guys looked at http://netjson.org/ ?
There are a few visualizers implemented already:
http://netjson.org/docs/implementations.html#network-topology-visualizers
Federico
On 01/24/2017 03:30 AM, Marc Juul wrote:
Alright! I hadn't considered go but as long as it
compiles to the
processor on the routers we use then that does simplify things quite a
bit :)
On Mon, Jan 23, 2017 at 6:19 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>> wrote:
Oh yea, here's what it outputs right now:
{
"Interfaces":{
"eth0":{
"Neighbors":{
"10.0.0.2":{
"Routes":{
"10.0.0.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.2"
},
"10.0.0.6":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.6"
}
}
},
"10.0.0.3":{
"Routes":{
"10.0.0.1":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.1"
},
"10.0.0.3":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.3"
},
"10.0.1.0/24 <http://10.0.1.0/24>":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.0/24
<http://10.0.1.0/24>"
},
"10.0.1.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.2"
},
"default":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"default"
}
}
},
"10.0.0.5":{
"Routes":{
"10.0.0.5":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.5",
"Destination":"10.0.0.5"
}
}
}
}
}
}
}
On Mon, Jan 23, 2017 at 6:15 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>> wrote:
As part of the new node dashboards, we need to gather info from
the nodes and pass it to the frontend dashboard app. There were
some shell scripts but they weren't very complete and I couldn't
find them yesterday, so I sat down to learn awk. Awk is very
graceful for parsing data out of text, but I found it cumbersome
generating json from the data in its memory.
SO I just did it with Go. Go compiles to machine code that will
run easily on the routers (unlike js). Also, it will be good for
doing other things to build up the data, like pinging endpoints
etc. Here is the repo: https://github.com/sudomesh/node-info-go
<https://github.com/sudomesh/node-info-go>
I will be at the meeting tomorrow to talk about how to harvest
the rest of the data we need to build a full dashboard.
-Jehan
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>
https://sudoroom.org/lists/listinfo/mesh
<https://sudoroom.org/lists/listinfo/mesh>
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
8:40 a.m.
This NetJSON looks pretty good. Should be pretty easy to rename some fields
to conform to it. Looks like we could get some nice visualizations for free
if we do this: https://github.com/netjson/netjsongraph.js
We'll have to add some other info to the data as well though to support the
full functionality of the routers.
On Tue, Jan 24, 2017 at 1:22 AM, Nemesis <nemesis(a)ninux.org> wrote:
Have you guys looked at http://netjson.org/ ?
There are a few visualizers implemented already:
http://netjson.org/docs/implementations.html#network-topology-visualizers
Federico
On 01/24/2017 03:30 AM, Marc Juul wrote:
Alright! I hadn't considered go but as long
as it compiles to the
processor on the routers we use then that does simplify things quite a
bit :)
On Mon, Jan 23, 2017 at 6:19 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>> wrote:
Oh yea, here's what it outputs right now:
{
"Interfaces":{
"eth0":{
"Neighbors":{
"10.0.0.2":{
"Routes":{
"10.0.0.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.2"
},
"10.0.0.6":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.6"
}
}
},
"10.0.0.3":{
"Routes":{
"10.0.0.1":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.1"
},
"10.0.0.3":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.3"
},
"10.0.1.0/24 <http://10.0.1.0/24>":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.0/24 <http://10.0.1.0/24
"
},
"10.0.1.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.2"
},
"default":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"default"
}
}
},
"10.0.0.5":{
"Routes":{
"10.0.0.5":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.5",
"Destination":"10.0.0.5"
}
}
}
}
}
}
}
On Mon, Jan 23, 2017 at 6:15 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>> wrote:
As part of the new node dashboards, we need to gather info from
the nodes and pass it to the frontend dashboard app. There were
some shell scripts but they weren't very complete and I couldn't
find them yesterday, so I sat down to learn awk. Awk is very
graceful for parsing data out of text, but I found it cumbersome
generating json from the data in its memory.
SO I just did it with Go. Go compiles to machine code that will
run easily on the routers (unlike js). Also, it will be good for
doing other things to build up the data, like pinging endpoints
etc. Here is the repo: https://github.com/sudomesh/node-info-go
<https://github.com/sudomesh/node-info-go>
I will be at the meeting tomorrow to talk about how to harvest
the rest of the data we need to build a full dashboard.
-Jehan
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>
https://sudoroom.org/lists/listinfo/mesh
<https://sudoroom.org/lists/listinfo/mesh>
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
25 Jan
25 Jan
12:44 a.m.
There are two potential projects on the Freifunk GSOC 2017 ideas list:
-
https://wiki.freifunk.net/Ideas#Implement_NetJSON_DeviceMonitoring_in_ubus_…
- https://wiki.freifunk.net/Ideas#LibreMesh_NetJSON_Agent
I believe some code from Wlan Slovenia can be reused for this purpose
(NetJSON DeviceMonitoring was guided and inspired by their suggestions):
https://github.com/wlanslovenija/nodewatcher-agent#monitoring-report-format
But we'll have to wait to see if we get accepted as Freifunk.
Federico
On 01/24/2017 05:40 PM, Jehan Tremback wrote:
This NetJSON looks pretty good. Should be pretty easy
to rename some
fields to conform to it. Looks like we could get some nice
visualizations for free if we do
this: https://github.com/netjson/netjsongraph.js
We'll have to add some other info to the data as well though to support
the full functionality of the routers.
On Tue, Jan 24, 2017 at 1:22 AM, Nemesis <nemesis(a)ninux.org
<mailto:nemesis@ninux.org>> wrote:
Have you guys looked at http://netjson.org/ ?
There are a few visualizers implemented already:
http://netjson.org/docs/implementations.html#network-topology-visualizers
<http://netjson.org/docs/implementations.html#network-topology-visualizers>
Federico
On 01/24/2017 03:30 AM, Marc Juul wrote:
Alright! I hadn't considered go but as long
as it compiles to the
processor on the routers we use then that does simplify things quite a
bit :)
On Mon, Jan 23, 2017 at 6:19 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>
<mailto:jehan.tremback@gmail.com <mailto:jehan.tremback@gmail.com>>>
wrote:
Oh yea, here's what it outputs right now:
{
"Interfaces":{
"eth0":{
"Neighbors":{
"10.0.0.2":{
"Routes":{
"10.0.0.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.2"
},
"10.0.0.6":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.6"
}
}
},
"10.0.0.3":{
"Routes":{
"10.0.0.1":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.1"
},
"10.0.0.3":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.3"
},
"10.0.1.0/24 <http://10.0.1.0/24>
<http://10.0.1.0/24>":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.0/24
<http://10.0.1.0/24> <http://10.0.1.0/24>"
},
"10.0.1.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.2"
},
"default":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"default"
}
}
},
"10.0.0.5":{
"Routes":{
"10.0.0.5":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.5",
"Destination":"10.0.0.5"
}
}
}
}
}
}
}
On Mon, Jan 23, 2017 at 6:15 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>
<mailto:jehan.tremback@gmail.com <mailto:jehan.tremback@gmail.com>>>
wrote:
As part of the new node dashboards, we need to gather info from
the nodes and pass it to the frontend dashboard app. There were
some shell scripts but they weren't very complete and I couldn't
find them yesterday, so I sat down to learn awk. Awk is very
graceful for parsing data out of text, but I found it cumbersome
generating json from the data in its memory.
SO I just did it with Go. Go compiles to machine code that will
run easily on the routers (unlike js). Also, it will be good for
doing other things to build up the data, like pinging endpoints
etc. Here is the repo: https://github.com/sudomesh/node-info-go
<https://github.com/sudomesh/node-info-go>
<https://github.com/sudomesh/node-info-go
<https://github.com/sudomesh/node-info-go>>
I will be at the meeting tomorrow to talk about how to harvest
the rest of the data we need to build a full dashboard.
-Jehan
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>
<mailto:mesh@lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>>
<https://sudoroom.org/lists/listinfo/mesh>
<https://sudoroom.org/lists/listinfo/mesh
<https://sudoroom.org/lists/listinfo/mesh>>
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>
https://sudoroom.org/lists/listinfo/mesh
<https://sudoroom.org/lists/listinfo/mesh>
31 Jan
31 Jan
9:22 p.m.
So, I decided that it would be easier to simply send the raw output of the
shell to the fronted and do the parsing in JS. This way the person working
on the dashboard can work on this component with JS skills + minimal shell
knowledge instead of having to learn Go or awk or whatever. Here's a
preliminary commit:
https://github.com/sudomesh/peoplesopen-dash/commit/d50c7a5602411f27a7d6bf5…
On Wed, Jan 25, 2017 at 3:44 AM, Nemesis <nemesis(a)ninux.org> wrote:
There are two potential projects on the Freifunk GSOC
2017 ideas list:
-
https://wiki.freifunk.net/Ideas#Implement_NetJSON_
DeviceMonitoring_in_ubus_.28OpenWRT.2FLEDE.29
- https://wiki.freifunk.net/Ideas#LibreMesh_NetJSON_Agent
I believe some code from Wlan Slovenia can be reused for this purpose
(NetJSON DeviceMonitoring was guided and inspired by their suggestions):
https://github.com/wlanslovenija/nodewatcher-
agent#monitoring-report-format
But we'll have to wait to see if we get accepted as Freifunk.
Federico
On 01/24/2017 05:40 PM, Jehan Tremback wrote:
from
This NetJSON looks pretty good. Should be pretty
easy to rename some
fields to conform to it. Looks like we could get some nice
visualizations for free if we do
this: https://github.com/netjson/netjsongraph.js
We'll have to add some other info to the data as well though to support
the full functionality of the routers.
On Tue, Jan 24, 2017 at 1:22 AM, Nemesis <nemesis(a)ninux.org
<mailto:nemesis@ninux.org>> wrote:
Have you guys looked at http://netjson.org/ ?
There are a few visualizers implemented already:
http://netjson.org/docs/implementations.html#network-
topology-visualizers
<http://netjson.org/docs/implementations.html#network-
topology-visualizers>
Federico
On 01/24/2017 03:30 AM, Marc Juul wrote:
> Alright! I hadn't considered go but as long as it compiles to the
> processor on the routers we use then that does simplify things
quite a
bit :)
On Mon, Jan 23, 2017 at 6:19 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>
<mailto:jehan.tremback@gmail.com <mailto:jehan.tremback@gmail.com>>>
wrote:
Oh yea, here's what it outputs right now:
{
"Interfaces":{
"eth0":{
"Neighbors":{
"10.0.0.2":{
"Routes":{
"10.0.0.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.2"
},
"10.0.0.6":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.2",
"Destination":"10.0.0.6"
}
}
},
"10.0.0.3":{
"Routes":{
"10.0.0.1":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.1"
},
"10.0.0.3":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.0.3"
},
"10.0.1.0/24 <http://10.0.1.0/24>
<http://10.0.1.0/24>":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.0/24
<http://10.0.1.0/24> <http://10.0.1.0/24>"
},
"10.0.1.2":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"10.0.1.2"
},
"default":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.3",
"Destination":"default"
}
}
},
"10.0.0.5":{
"Routes":{
"10.0.0.5":{
"Protocol":"babel",
"Interface":"eth0",
"Neighbor":"10.0.0.5",
"Destination":"10.0.0.5"
}
}
}
}
}
}
}
On Mon, Jan 23, 2017 at 6:15 PM, Jehan Tremback
<jehan.tremback(a)gmail.com <mailto:jehan.tremback@gmail.com>
<mailto:jehan.tremback@gmail.com <mailto:jehan.tremback@gmail.com>>>
wrote:
>
> As part of the new node dashboards, we need to gather info > the nodes and pass it to the
frontend dashboard app. There
were
> some shell scripts but they
weren't very complete and I
couldn't
> find them yesterday, so I sat
down to learn awk. Awk is
very
> graceful for parsing data out of
text, but I found it
cumbersome
> generating json from the data in
its memory.
>
> SO I just did it with Go. Go compiles to machine code that
will
> run easily on the routers
(unlike js). Also, it will be
good for
> doing other things to build up
the data, like pinging
endpoints
> etc. Here is the repo:
https://github.com/sudomesh/
node-info-go
<https://github.com/sudomesh/node-info-go>
harvest
<https://github.com/sudomesh/node-info-go
<https://github.com/sudomesh/node-info-go>>
>
> I will be at the meeting tomorrow to talk about how to
the rest of the data we need to build a full dashboard.
-Jehan
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>
<mailto:mesh@lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>>
<https://sudoroom.org/lists/listinfo/mesh>
<https://sudoroom.org/lists/listinfo/mesh
<https://sudoroom.org/lists/listinfo/mesh>>
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org <mailto:mesh@lists.sudoroom.org>
https://sudoroom.org/lists/listinfo/mesh
<https://sudoroom.org/lists/listinfo/mesh>
3194
days inactive
3202
days old
6 comments
3 participants
participants (3)
-
Jehan Tremback -
Marc Juul -
Nemesis