15 Feb
2015
15 Feb
'15
9:39 a.m.
Hey just checking in to see what time folks are thinking about being at the
omni to do some node mounting. I'm maybe hoping to be elsewhere between
~3:30-4:30, but otherwise I'm fairly free.
Also - I'm not really sure how long this will take. I can do a bunch of the
flashing and configuring, but it seems like a good deal of the work would
be placement and mounting.
What are other people thinking?
15 Feb
15 Feb
10:57 a.m.
New subject: [mesh-dev] Nodes today?
Max,
I'm planning to come in today for this. Here's what I think we
should do:
1. Do a quick walk-through to determine locations and number of nodes
to flash, cable lengths, additional materials required.
2. Flash the nodes, agree on a naming and addressing scheme, disable
tunneldigger where appropriate, configure other stuff (TX power?)
3. Crimp cables, mount nodes and test - what materials do we need?
Can we start the walk-through by noon, let's say? At least try to be
in sudo by noon?
Alex
2015-02-15 9:39 GMT-08:00 max b <maxb.personal(a)gmail.com>om>:
Hey just checking in to see what time folks are
thinking about being at
the omni to do some node mounting. I'm maybe hoping to be elsewhere between
~3:30-4:30, but otherwise I'm fairly free.
Also - I'm not really sure how long this will take. I can do a bunch of
the flashing and configuring, but it seems like a good deal of the work
would be placement and mounting.
What are other people thinking?
_______________________________________________
mesh-dev mailing list
mesh-dev(a)lists.sudoroom.org
https://lists.sudoroom.org/listinfo/mesh-dev
11:19 a.m.
New subject: [mesh-dev] Nodes today?
Ok I might be a little later than noon, but hopefully not by much. There are a couple
software things to work out, including if we want to switch to the new address space.
While folks are planning out locations and mounting ideas I might try to get the software
stuff in place and flash and configure a bunch.
On February 15, 2015 10:57:31 AM PST, Alexander Papazoglou <papazoga(a)gmail.com>
wrote:
Max,
I'm planning to come in today for this. Here's what I think we
should do:
1. Do a quick walk-through to determine locations and number of nodes
to flash, cable lengths, additional materials required.
2. Flash the nodes, agree on a naming and addressing scheme, disable
tunneldigger where appropriate, configure other stuff (TX power?)
3. Crimp cables, mount nodes and test - what materials do we need?
Can we start the walk-through by noon, let's say? At least try to be
in sudo by noon?
Alex
2015-02-15 9:39 GMT-08:00 max b <maxb.personal(a)gmail.com>om>:
Hey just checking in to see what time folks are
thinking about being
at
the omni to do some node mounting. I'm maybe
hoping to be elsewhere
between
~3:30-4:30, but otherwise I'm fairly free.
Also - I'm not really sure how long this will take. I can do a bunch
of
the flashing and configuring, but it seems like a
good deal of the
work
> would be placement and mounting.
>
> What are other people thinking?
>
>
>
> _______________________________________________
> mesh-dev mailing list
> mesh-dev(a)lists.sudoroom.org
> https://lists.sudoroom.org/listinfo/mesh-dev
>
> 
10:57 a.m.
New subject: [mesh-dev] Nodes today?
Marc and I will be in around 12!
On Feb 15, 2015 9:39 AM, "max b" <maxb.personal(a)gmail.com> wrote:
Hey just checking in to see what time folks are
thinking about being at
the omni to do some node mounting. I'm maybe hoping to be elsewhere between
~3:30-4:30, but otherwise I'm fairly free.
Also - I'm not really sure how long this will take. I can do a bunch of
the flashing and configuring, but it seems like a good deal of the work
would be placement and mounting.
What are other people thinking?
_______________________________________________
mesh-dev mailing list
mesh-dev(a)lists.sudoroom.org
https://lists.sudoroom.org/listinfo/mesh-dev
3395
days inactive
3395
days old
3 comments
3 participants
participants (3)
-
Alexander Papazoglou -
Jenny Ryan -
max b