6 Jun
2017
6 Jun
'17
5:09 p.m.
Adding the mesh list, as this would be a great opportunity for neighborhood
outreach, and we could set up some of the hardware and promote our next
BYOI (build your own internet) workshop on July 1st.
Unfortunately, Marc and I can't help to coordinate as we're out of town
until the 27th, but I believe Grant said he'd be down, and maybe others
would be interested?
I like the 'take stuff apart' idea, Patrik :)
Jenny
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
On Tue, Jun 6, 2017 at 8:39 AM, Patrik D'haeseleer <patrikd(a)gmail.com>
wrote:
On Mon, Jun 5, 2017 at 8:40 PM, Ken Litchfield
<litchfield.ken(a)gmail.com>
wrote:
SUDO never said one way or the other but it
seemed like they were
probably not going to participate or......
One of the ideas suggested at one of the Sudo meetings last week was to
just have a table full of ewaste gear, screw drivers, pliers and hot glue,
for kids to take stuff apart and put it back together again. That always
used to be a very popular activity at Maker Faire. (They stopped doing that
a few years ago - possibly out of liability concerns: sharp edges, lead
solders, you name it...)
Patrik
On Mon, Jun 5, 2017 at 8:29 PM, joseph liesner <blue393(a)lmi.net> wrote:
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
On Jun 5, 2017, at 5:51 PM, Patrik D'haeseleer wrote:
Was Sudo or other groups at Omni planning to have a table at the Temescal
Street Fair this Sunday <http://temescalstreetfair.org/>? This is a
great opportunity to reach out to our immediate neighborhood in a very
visible fashion.
CCL will be there with at least a table or two, and it sounds like BAAM
may have up to five mushroomy tables as well.
We were offered free space to exhibit at the Fair, but I am not sure
exactly where our tables will be - somewhere at the intersection of 48th
and Telegraph - or how much total space we will have available. I believe
Ken Litchfield has been our main contact person for those kinds of
logistics.
Patrik
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
6 Jun
6 Jun
9:58 p.m.
New subject: [omni-discuss] Omni at Temescal Street Fair this Sunday?
Hi Jenny and everybody,
Thanks for passing along this info. We are definitely interested in having
a peoplesopen.net table at the Temesecal Street Fair. After a brainstorming
meeting we have a few logistical questions:
**do we need to bring a table or are tables provided?
**when can we begin setup? 11am?
**what is the electricity/power situation?
I will send along meeting notes and other information regarding
preparations to the mesh list. I'm not sure if sudoroom proper has any
plans of having a table.
-grant
On Tue, Jun 6, 2017 at 5:09 PM, Jenny Ryan <tunabananas(a)gmail.com> wrote:
Adding the mesh list, as this would be a great
opportunity for
neighborhood outreach, and we could set up some of the hardware and promote
our next BYOI (build your own internet) workshop on July 1st.
Unfortunately, Marc and I can't help to coordinate as we're out of town
until the 27th, but I believe Grant said he'd be down, and maybe others
would be interested?
I like the 'take stuff apart' idea, Patrik :)
Jenny
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
On Tue, Jun 6, 2017 at 8:39 AM, Patrik D'haeseleer <patrikd(a)gmail.com>
wrote:
On Mon, Jun 5, 2017 at 8:40 PM, Ken Litchfield
<litchfield.ken(a)gmail.com>
wrote:
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
SUDO never said one way or the other but it
seemed like they were
probably not going to participate or......
One of the ideas suggested at one of the Sudo meetings last week was to
just have a table full of ewaste gear, screw drivers, pliers and hot glue,
for kids to take stuff apart and put it back together again. That always
used to be a very popular activity at Maker Faire. (They stopped doing that
a few years ago - possibly out of liability concerns: sharp edges, lead
solders, you name it...)
Patrik
On Mon, Jun 5, 2017 at 8:29 PM, joseph liesner <blue393(a)lmi.net> wrote:
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
On Jun 5, 2017, at 5:51 PM, Patrik D'haeseleer wrote:
Was Sudo or other groups at Omni planning to have a table at the Temescal
Street Fair this Sunday <http://temescalstreetfair.org/>? This is a
great opportunity to reach out to our immediate neighborhood in a very
visible fashion.
CCL will be there with at least a table or two, and it sounds like BAAM
may have up to five mushroomy tables as well.
We were offered free space to exhibit at the Fair, but I am not sure
exactly where our tables will be - somewhere at the intersection of 48th
and Telegraph - or how much total space we will have available. I believe
Ken Litchfield has been our main contact person for those kinds of
logistics.
Patrik
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
10:19 p.m.
New subject: [omni-discuss] Omni at Temescal Street Fair this Sunday?
Heyall,
**Tables are from Omni whatever we have and best format that you need.
The arrangements that I made with the Business Improvement District and the
fair contractor is that we provide all our infrastructure and then they
don't have to provide and charge us which is why we can do this for free
instead of booth fees.
**Some Omnifolks are going to be setting up as early as 9am. As long as you
are setup and ready by noon start time that should be fine. Takedown starts
at 6 closing and likely happen pretty quickly. Not sure what time they
officially open the street to traffic but I would imagine around an hour
after closing if last year's fair is any indication.
**Looks like we can have an outlet from one of the businesses for free and
put a power strip on it for all Omnier's needs. Which should be rather
minor except when CCL is doing a casting demo and has to heat a low temp
metal. Other draws would be turned off temporarily during the periodic
casting demos. As a backup plan CCL may be doing the heating at Omni and
bring the molten metal over that way. Omni/CCL/BAAM/SUDO provides their own
extension cords and other infrastructure.
You can represent your group to the public however you like whether it is a
project of SUDO per se or distinguished independently, but it is all under
the umbrella of Omni as far as the BID and Fair contractor are concerned.
Thanks Ken
On Tue, Jun 6, 2017 at 9:58 PM, G Gallo <ggallo102(a)gmail.com> wrote:
Hi Jenny and everybody,
Thanks for passing along this info. We are definitely interested in having
a peoplesopen.net table at the Temesecal Street Fair. After a
brainstorming meeting we have a few logistical questions:
**do we need to bring a table or are tables provided?
**when can we begin setup? 11am?
**what is the electricity/power situation?
I will send along meeting notes and other information regarding
preparations to the mesh list. I'm not sure if sudoroom proper has any
plans of having a table.
-grant
On Tue, Jun 6, 2017 at 5:09 PM, Jenny Ryan <tunabananas(a)gmail.com> wrote:
Adding the mesh list, as this would be a great
opportunity for
neighborhood outreach, and we could set up some of the hardware and promote
our next BYOI (build your own internet) workshop on July 1st.
Unfortunately, Marc and I can't help to coordinate as we're out of town
until the 27th, but I believe Grant said he'd be down, and maybe others
would be interested?
I like the 'take stuff apart' idea, Patrik :)
Jenny
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining
it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
On Tue, Jun 6, 2017 at 8:39 AM, Patrik D'haeseleer <patrikd(a)gmail.com>
wrote:
On Mon, Jun 5, 2017 at 8:40 PM, Ken Litchfield
<litchfield.ken(a)gmail.com
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
wrote:
SUDO never said one way or the other but it
seemed like they were
probably not going to participate or......
One of the ideas suggested at one of the Sudo meetings last week was to
just have a table full of ewaste gear, screw drivers, pliers and hot glue,
for kids to take stuff apart and put it back together again. That always
used to be a very popular activity at Maker Faire. (They stopped doing that
a few years ago - possibly out of liability concerns: sharp edges, lead
solders, you name it...)
Patrik
On Mon, Jun 5, 2017 at 8:29 PM, joseph liesner <blue393(a)lmi.net> wrote:
>
> On Jun 5, 2017, at 5:51 PM, Patrik D'haeseleer wrote:
>
> Was Sudo or other groups at Omni planning to have a table at the Temescal
> Street Fair this Sunday <http://temescalstreetfair.org/>? This is a
> great opportunity to reach out to our immediate neighborhood in a very
> visible fashion.
>
> CCL will be there with at least a table or two, and it sounds like
> BAAM may have up to five mushroomy tables as well.
>
> We were offered free space to exhibit at the Fair, but I am not sure
> exactly where our tables will be - somewhere at the intersection of 48th
> and Telegraph - or how much total space we will have available. I believe
> Ken Litchfield has been our main contact person for those kinds of
> logistics.
>
> Patrik
> _______________________________________________
> discuss mailing list
> discuss(a)lists.omnicommons.org
> https://omnicommons.org/lists/listinfo/discuss
>
>
>
> _______________________________________________
> discuss mailing list
> discuss(a)lists.omnicommons.org
> https://omnicommons.org/lists/listinfo/discuss
>
>
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
7 Jun
7 Jun
3:24 p.m.
New subject: [omni-discuss] Omni at Temescal Street Fair this Sunday?
Hi everyone, I'd like to participate for Chiapas Support Committee. I can
show up around 10am. Where exactly are we setting up at? can we share #'s
I'm not on email too much. Jose 510.612.9763
On Tue, Jun 6, 2017 at 10:19 PM, Ken Litchfield <litchfield.ken(a)gmail.com>
wrote:
Heyall,
**Tables are from Omni whatever we have and best format that you need.
The arrangements that I made with the Business Improvement District and
the fair contractor is that we provide all our infrastructure and then they
don't have to provide and charge us which is why we can do this for free
instead of booth fees.
**Some Omnifolks are going to be setting up as early as 9am. As long as
you are setup and ready by noon start time that should be fine. Takedown
starts at 6 closing and likely happen pretty quickly. Not sure what time
they officially open the street to traffic but I would imagine around an
hour after closing if last year's fair is any indication.
**Looks like we can have an outlet from one of the businesses for free and
put a power strip on it for all Omnier's needs. Which should be rather
minor except when CCL is doing a casting demo and has to heat a low temp
metal. Other draws would be turned off temporarily during the periodic
casting demos. As a backup plan CCL may be doing the heating at Omni and
bring the molten metal over that way. Omni/CCL/BAAM/SUDO provides their own
extension cords and other infrastructure.
You can represent your group to the public however you like whether it is
a project of SUDO per se or distinguished independently, but it is all
under the umbrella of Omni as far as the BID and Fair contractor are
concerned.
Thanks Ken
On Tue, Jun 6, 2017 at 9:58 PM, G Gallo <ggallo102(a)gmail.com> wrote:
Hi Jenny and everybody,
Thanks for passing along this info. We are definitely interested in
having a peoplesopen.net table at the Temesecal Street Fair. After a
brainstorming meeting we have a few logistical questions:
**do we need to bring a table or are tables provided?
**when can we begin setup? 11am?
**what is the electricity/power situation?
I will send along meeting notes and other information regarding
preparations to the mesh list. I'm not sure if sudoroom proper has any
plans of having a table.
-grant
On Tue, Jun 6, 2017 at 5:09 PM, Jenny Ryan <tunabananas(a)gmail.com> wrote:
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
Adding the mesh list, as this would be a great
opportunity for
neighborhood outreach, and we could set up some of the hardware and promote
our next BYOI (build your own internet) workshop on July 1st.
Unfortunately, Marc and I can't help to coordinate as we're out of town
until the 27th, but I believe Grant said he'd be down, and maybe others
would be interested?
I like the 'take stuff apart' idea, Patrik :)
Jenny
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining
it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
On Tue, Jun 6, 2017 at 8:39 AM, Patrik D'haeseleer <patrikd(a)gmail.com>
wrote:
On Mon, Jun 5, 2017 at 8:40 PM, Ken Litchfield
<
litchfield.ken(a)gmail.com> wrote:
> SUDO never said one way or the other but it seemed like they were
> probably not going to participate or......
>
One of the ideas suggested at one of the Sudo meetings last week was to
just have a table full of ewaste gear, screw drivers, pliers and hot glue,
for kids to take stuff apart and put it back together again. That always
used to be a very popular activity at Maker Faire. (They stopped doing that
a few years ago - possibly out of liability concerns: sharp edges, lead
solders, you name it...)
Patrik
>
>
> On Mon, Jun 5, 2017 at 8:29 PM, joseph liesner <blue393(a)lmi.net>
> wrote:
>
>>
>> On Jun 5, 2017, at 5:51 PM, Patrik D'haeseleer wrote:
>>
>> Was Sudo or other groups at Omni planning to have a table at the Temescal
>> Street Fair this Sunday <http://temescalstreetfair.org/>? This is a
>> great opportunity to reach out to our immediate neighborhood in a very
>> visible fashion.
>>
>> CCL will be there with at least a table or two, and it sounds like
>> BAAM may have up to five mushroomy tables as well.
>>
>> We were offered free space to exhibit at the Fair, but I am not sure
>> exactly where our tables will be - somewhere at the intersection of 48th
>> and Telegraph - or how much total space we will have available. I believe
>> Ken Litchfield has been our main contact person for those kinds of
>> logistics.
>>
>> Patrik
>> _______________________________________________
>> discuss mailing list
>> discuss(a)lists.omnicommons.org
>> https://omnicommons.org/lists/listinfo/discuss
>>
>>
>>
>> _______________________________________________
>> discuss mailing list
>> discuss(a)lists.omnicommons.org
>> https://omnicommons.org/lists/listinfo/discuss
>>
>>
>
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
9:50 p.m.
New subject: [omni-discuss] Omni at Temescal Street Fair this Sunday?
Hey Jose,
I'm coordinating the Omni presence with the Business Improvement District
and the Temescal Street Fair contractor. Looks like we'll have a presence
in various fashions with CCL, BAAM, ABDC, FNB, SUDO, Omni overall, and now
CSC.
We'll be setting up at roughly the corner of 48th and Telegraph with some
folks perhaps starting setup at 9am.
I take it you need a single table and will primarily talk to the public and
distribute information. Please let me know of any other details like
activities or whatnot and your needs, and any other questions you may have.
For the extent of the fair planning if you need to communicate or
coordinate with me please continue in writing with email for clarity,
especially at this late date.
Thanks Ken
On Wed, Jun 7, 2017 at 3:24 PM, Jose Plascencia <jpf2180(a)gmail.com> wrote:
Hi everyone, I'd like to participate for Chiapas
Support Committee. I can
show up around 10am. Where exactly are we setting up at? can we share #'s
I'm not on email too much. Jose 510.612.9763 <(510)%20612-9763>
On Tue, Jun 6, 2017 at 10:19 PM, Ken Litchfield <litchfield.ken(a)gmail.com>
wrote:
Heyall,
**Tables are from Omni whatever we have and best format that you need.
The arrangements that I made with the Business Improvement District and
the fair contractor is that we provide all our infrastructure and then they
don't have to provide and charge us which is why we can do this for free
instead of booth fees.
**Some Omnifolks are going to be setting up as early as 9am. As long as
you are setup and ready by noon start time that should be fine. Takedown
starts at 6 closing and likely happen pretty quickly. Not sure what time
they officially open the street to traffic but I would imagine around an
hour after closing if last year's fair is any indication.
**Looks like we can have an outlet from one of the businesses for free
and put a power strip on it for all Omnier's needs. Which should be rather
minor except when CCL is doing a casting demo and has to heat a low temp
metal. Other draws would be turned off temporarily during the periodic
casting demos. As a backup plan CCL may be doing the heating at Omni and
bring the molten metal over that way. Omni/CCL/BAAM/SUDO provides their own
extension cords and other infrastructure.
You can represent your group to the public however you like whether it is
a project of SUDO per se or distinguished independently, but it is all
under the umbrella of Omni as far as the BID and Fair contractor are
concerned.
Thanks Ken
On Tue, Jun 6, 2017 at 9:58 PM, G Gallo <ggallo102(a)gmail.com> wrote:
Hi Jenny and everybody,
Thanks for passing along this info. We are definitely interested in
having a peoplesopen.net table at the Temesecal Street Fair. After a
brainstorming meeting we have a few logistical questions:
**do we need to bring a table or are tables provided?
**when can we begin setup? 11am?
**what is the electricity/power situation?
I will send along meeting notes and other information regarding
preparations to the mesh list. I'm not sure if sudoroom proper has any
plans of having a table.
-grant
On Tue, Jun 6, 2017 at 5:09 PM, Jenny Ryan <tunabananas(a)gmail.com>
wrote:
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
Adding the mesh list, as this would be a great
opportunity for
neighborhood outreach, and we could set up some of the hardware and promote
our next BYOI (build your own internet) workshop on July 1st.
Unfortunately, Marc and I can't help to coordinate as we're out of town
until the 27th, but I believe Grant said he'd be down, and maybe others
would be interested?
I like the 'take stuff apart' idea, Patrik :)
Jenny
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining
it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
On Tue, Jun 6, 2017 at 8:39 AM, Patrik D'haeseleer <patrikd(a)gmail.com>
wrote:
> On Mon, Jun 5, 2017 at 8:40 PM, Ken Litchfield <
> litchfield.ken(a)gmail.com> wrote:
>
>
>> SUDO never said one way or the other but it seemed like they were
>> probably not going to participate or......
>>
>
> One of the ideas suggested at one of the Sudo meetings last week was
> to just have a table full of ewaste gear, screw drivers, pliers and hot
> glue, for kids to take stuff apart and put it back together again. That
> always used to be a very popular activity at Maker Faire. (They stopped
> doing that a few years ago - possibly out of liability concerns: sharp
> edges, lead solders, you name it...)
>
> Patrik
>
>
>
>
>>
>>
>> On Mon, Jun 5, 2017 at 8:29 PM, joseph liesner <blue393(a)lmi.net>
>> wrote:
>>
>>>
>>> On Jun 5, 2017, at 5:51 PM, Patrik D'haeseleer wrote:
>>>
>>> Was Sudo or other groups at Omni planning to have a table at the Temescal
>>> Street Fair this Sunday <http://temescalstreetfair.org/>? This is a
>>> great opportunity to reach out to our immediate neighborhood in a very
>>> visible fashion.
>>>
>>> CCL will be there with at least a table or two, and it sounds like
>>> BAAM may have up to five mushroomy tables as well.
>>>
>>> We were offered free space to exhibit at the Fair, but I am not sure
>>> exactly where our tables will be - somewhere at the intersection of 48th
>>> and Telegraph - or how much total space we will have available. I believe
>>> Ken Litchfield has been our main contact person for those kinds of
>>> logistics.
>>>
>>> Patrik
>>> _______________________________________________
>>> discuss mailing list
>>> discuss(a)lists.omnicommons.org
>>> https://omnicommons.org/lists/listinfo/discuss
>>>
>>>
>>>
>>> _______________________________________________
>>> discuss mailing list
>>> discuss(a)lists.omnicommons.org
>>> https://omnicommons.org/lists/listinfo/discuss
>>>
>>>
>>
>
> _______________________________________________
> discuss mailing list
> discuss(a)lists.omnicommons.org
> https://omnicommons.org/lists/listinfo/discuss
>
>
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
6 Jun
6 Jun
10:31 p.m.
New subject: [omni-discuss] Omni at Temescal Street Fair this Sunday?
Here are the current ideas and preparations needed for the Temescal Street
Fair,
**the street fair is from 12pm to 6pm on this Sunday, June 11th.
**humans willing to talk to other humans - bullitt, scott(maybe?), grant,
sierk, jorrit
if anyone else wants to volunteer either respond to the list, or ping on
signal, or just show up.
**large form table sign - jorrit
**flyers promoting byoi workshop - jorrit, sierk
**where are more business cards? should we hand out cards? jenny?
**disaster ping demo - grant, jorrit, bullitt's raspi, scott could bring
two more ESP8266s
get battery holders and AAA batteries (maybe look in sudo first) - grant
work up recipe/instructions for build your own disaster ping? - grant
**antennae display?
to show people what a node looks like, is this reasonable?
**crimping station?
maybe too much of a hassle, crowd control? constant attention?
**BRING THE MAP!
let people pin to it? separate color?
**BRING THE BYOI POSTER!
If anyone has any other ideas or objections to any of the aforementioned
ideas, feel free to share them.
Full meeting notes can be found at
https://pad.riseup.net/p/peoplesopen_agenda
-grant
On Tue, Jun 6, 2017 at 9:58 PM, G Gallo <ggallo102(a)gmail.com> wrote:
Hi Jenny and everybody,
Thanks for passing along this info. We are definitely interested in having
a peoplesopen.net table at the Temesecal Street Fair. After a
brainstorming meeting we have a few logistical questions:
**do we need to bring a table or are tables provided?
**when can we begin setup? 11am?
**what is the electricity/power situation?
I will send along meeting notes and other information regarding
preparations to the mesh list. I'm not sure if sudoroom proper has any
plans of having a table.
-grant
On Tue, Jun 6, 2017 at 5:09 PM, Jenny Ryan <tunabananas(a)gmail.com> wrote:
Adding the mesh list, as this would be a great
opportunity for
neighborhood outreach, and we could set up some of the hardware and promote
our next BYOI (build your own internet) workshop on July 1st.
Unfortunately, Marc and I can't help to coordinate as we're out of town
until the 27th, but I believe Grant said he'd be down, and maybe others
would be interested?
I like the 'take stuff apart' idea, Patrik :)
Jenny
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining
it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
On Tue, Jun 6, 2017 at 8:39 AM, Patrik D'haeseleer <patrikd(a)gmail.com>
wrote:
On Mon, Jun 5, 2017 at 8:40 PM, Ken Litchfield
<litchfield.ken(a)gmail.com
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
wrote:
SUDO never said one way or the other but it
seemed like they were
probably not going to participate or......
One of the ideas suggested at one of the Sudo meetings last week was to
just have a table full of ewaste gear, screw drivers, pliers and hot glue,
for kids to take stuff apart and put it back together again. That always
used to be a very popular activity at Maker Faire. (They stopped doing that
a few years ago - possibly out of liability concerns: sharp edges, lead
solders, you name it...)
Patrik
On Mon, Jun 5, 2017 at 8:29 PM, joseph liesner <blue393(a)lmi.net> wrote:
>
> On Jun 5, 2017, at 5:51 PM, Patrik D'haeseleer wrote:
>
> Was Sudo or other groups at Omni planning to have a table at the Temescal
> Street Fair this Sunday <http://temescalstreetfair.org/>? This is a
> great opportunity to reach out to our immediate neighborhood in a very
> visible fashion.
>
> CCL will be there with at least a table or two, and it sounds like
> BAAM may have up to five mushroomy tables as well.
>
> We were offered free space to exhibit at the Fair, but I am not sure
> exactly where our tables will be - somewhere at the intersection of 48th
> and Telegraph - or how much total space we will have available. I believe
> Ken Litchfield has been our main contact person for those kinds of
> logistics.
>
> Patrik
> _______________________________________________
> discuss mailing list
> discuss(a)lists.omnicommons.org
> https://omnicommons.org/lists/listinfo/discuss
>
>
>
> _______________________________________________
> discuss mailing list
> discuss(a)lists.omnicommons.org
> https://omnicommons.org/lists/listinfo/discuss
>
>
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
2668
days inactive
2669
days old
5 comments
4 participants
participants (4)
-
G Gallo -
Jenny Ryan -
Jose Plascencia -
Ken Litchfield