892
edits
(Created page with " stuff") |
|||
Line 1: | Line 1: | ||
= Needed info = | |||
== List of direct neighbors (by hostname if possible) and how they're connected == | |||
ip route | |||
or | |||
babeld -i (and look at the via for interface and nexthop for ip) | |||
We could use "dig @ip_of_node 127.0.0.1" but the dns on the node doesn't respond to non-local requests. | |||
== List of neighbors via extender nodes == | |||
Simple list using ip route or babeld -i and looking at "via" for interfaces called eth0.1 or eth0.2 | |||
== List of clients on wifi == | |||
iw dev <interface_name> station dump | |||
Interfaces are open2 (public on 2.4 GHz), open5 (public on 5 GHz), mesh2, mesh5, etc. | |||
== List of clients on ethernet == | |||
arp -i eth0 -n | |||
or look at DHCP leases and eliminate the ones found wifi. | |||
== Are we connected to the exit node (is there direct internet via ethernet) == | |||
Check if l2tp0 interface exists: | |||
ip addr | |||
== Do we have a path to the internet via the mesh == | |||
Check if ip route has a default path or babeld -i has one. | |||
== Which ethernet ports are physically connected == | |||
swconfig dev eth0 list ? (something like that) | |||
== List of extender nodes and which type they are == | |||
Same as above (swconfig) for list of extender nodes but for type of node we'll need the ubus http forwarder thing. | |||
* | |||
== Total nodes on the mesh == | |||
ip route | |||
or | |||
babeld -i |