625
edits
(adds roughing clearance hack) |
(adds that white switch is on when down) |
||
Line 52: | Line 52: | ||
# Before turning anything else on, replace the bits if necessary using the drill key tool on the tool wall. | # Before turning anything else on, replace the bits if necessary using the drill key tool on the tool wall. | ||
# Turn on the power supply, located behind the monitor stand, in a hefty, vcr-looking black box. It's '''not''' a white switch, instead it looks similar to the switch on the back of a computer's power supply. | # Turn on the power supply, located behind the monitor stand, in a hefty, vcr-looking black box. It's '''not''' a white switch, instead it looks similar to the switch on the back of a computer's power supply. | ||
# Also turn on the USB to serial converter using which '''is''' a white switch attached to a tiny black box in between the power supply and the mill. | # Also turn on the USB to serial converter using which '''is''' a white switch attached to a tiny black box in between the power supply and the mill. '''Down is on'''. | ||
# Open Mach3 | # Open Mach3 | ||
## Select ''File > Load G-Code'' and select the desired gcode generated by CamBam or from elsewhere. | ## Select ''File > Load G-Code'' and select the desired gcode generated by CamBam or from elsewhere. |