Re: [DisasterRadio] hello to disaster radio

I think they are asking specifically for a dual-LoRa device. If I understand correctly, Fitz has a handful(?) of dual-lora prototype boards that may or may not work with the current build of the firmware (likely it would need some tweaking of pins, etc. since I never got my hands on one for testing). I did some hacking last year on a dual lora setup. I'm pretty sure I used the LoPy4 and an old-school ESP8266-compatible disaster.radio LoRa hat (what's up from 2018! idk if anyone else still has any of these...). I used the LoPy4 because other boards don't break out all the pins needed for the dual-lora setup. The point is, i was able to get two lora modules connected to an ESP32, but I didn't do much more than that. Fitz, I'll DM you about getting at least one of those prototypes sent my direction so I can validate that it works with the firmware (idk how soon I'll get around to it, but eventually). -Grant On 5/6/21 1:29 AM, Wensheng Xie wrote: > > Yes, the current firmware runs on > > TTGO LoRa32 V2.1 ESP32 OLED 0.96 > https://item.taobao.com/item.htm?id=592989061028 > > Generally, I think the firmware should work for these boards > http://www.lilygo.cn/products.aspx?TypeId=50003&fid=t3:50003:3 > > On 2021/5/6 下午12:06, Code Bus wrote: > >> Hi. I am interested in development of this dual-module board, a friend doing amateur radio pointed me to this since I have a foot in the world of radio mesh and an interest in longer wavelength comms. >> >> This runs the disaster.radio firmware normally loaded onto those Ali-vendor sold TTGO LoRa modules? >> >> _______________________________________________DisasterRadio mailing list>>> DisasterRadio(a)lists.sudoroom.org>>> https://sudoroom.org/lists/listinfo/disasterradio >> > > _______________________________________________DisasterRadio mailing list>> DisasterRadio(a)lists.sudoroom.org>> https://sudoroom.org/lists/listinfo/disasterradio >