mesh

mesh@sudoroom.org

1409 discussions

by Steve Berl

Cleaning my garage I came across a Ubiquiti PicoStation2 HP. I got this from the mesh group once upon a time because I thought I was going to help with development, but things got in the way and that never really happened. It's still in the box with antenna, power cord and POE adapter. Do you folks what it back, or is it eWaste? I can drop it my this evening or some other time that is convenient. -- -steve

9 years, 1 month

preferred router

by Morgan Allen

I've checked the wiki a couple times but cannot seem to find the answer I'm after... curious what the current best option for both a mesh and home use router would be. I've been running OpenWRT on a WRT54G for years but it just cannot keep up any more and has zero space available. Basically I need something that meets the needs for the mesh network and has a built in switch/multiple ethernet ports. Thanks! -- http://ithoughtyouweretherobot.com Metal and Wire http://nolonelyguineapigs.com/ Wandering and Rambling http://morglog.org Old and Neglected. -----BEGIN PGP PUBLIC KEY BLOCK----- Version: OpenPGP.js v.1.20121007 Comment: http://openpgpjs.org xsBNBFG3btUBB/9+/WJNOSIuc/praKPaPOweqXV5s7PGRD+HAnNWF/19YAY3 AFtfeoelhhY4sMJoobTaJzcZojznZ1kl/7UuuYCnbJO3Z9kaSMVrVxEZMSLe YmW8Hc4ZsTnl9f05DQFy8ABpAvMLmXJQXh63BbfzjFqNbSWQfLhrubSM2Elq xmN6EsmRyAuEeYlSnal+Di2MlViohpCbbagE2D6AZTUECIamTib6+DuLG4XO b4GGKHR9TXu2qS1VH6hqcvdEz2MDE5OqZzAnBgcF2dvcOdTk9gAOoR1T+qKj IJtg2X0ETbxcPqEXQoXE8VrxN0MLT5JQKTg26+csU4P2w0rEWsUsJombABEB AAHNJU1vcmdhbiBBbGxlbiA8bW9yZ2FucmFsbGVuQGdtYWlsLmNvbT7CwFwE EAECABAFAlG3btwJEG9pFLKaVEfeAAD7hwf+K8LN/kfgi8GTRLiTcuM+hSbm uAeiBY+VaJIQFLzoFlt8A0hBlLNPFNNmUDxdPrMErdHgZ7HtJW/6RANuBTti 5hr3EBguH1GQyK7BbUqJGvaEX4UNRej3uyX3ufXDsIB/3NsKaTyyu+SO0+Hv Cn2DwmlfSXcPhoarx6Turizn/WwgtTN3tqrMWxxiCKWydLH5xYuz+23BLMdc oF/zkbF+7ddFhmyfiFh4Ej9//tsfwPj2cACU3uLTrcwCo7IxUtkrqMF/fhlm LEqjhzDDjq9v7GNWb/5xB2xgTaucJ7/ljuS8nPlZqwCI8NlTgSqC8nyVLyjS yVtOzkItcS0UqyW1Mg== =V/Ia -----END PGP PUBLIC KEY BLOCK-----

9 years, 1 month

Re: [Mesh] [sudo-discuss] Can someone please donate Cat6 Shielded cable?

by danarauz＠gmail.com

Shielded Cat6 has been ordered (thanks to Charley) and "theoretically" will be delivered to his place on Friday. Charley is bringing it to Sudoroom on Saturday. Nice! Daniel On Thu, Aug 27, 2015 at 4:37 PM, danarauz(a)gmail.com <danarauz(a)gmail.com> wrote: > Awesome! See you both Saturday! > And, many thanks Charley! > > Daniel > > On Thu, Aug 27, 2015 at 2:02 AM, Charley Sheets <rcsheets(a)acm.org> wrote: > >> On Wed, 26 Aug 2015 20:24:50 -0700 >> "danarauz(a)gmail.com" <danarauz(a)gmail.com> wrote: >> >> > I think this should do the job. >> > Thanks! >> >> Ordered. Theoretically it should be at my house Friday, and I'll bring >> it over to sudo on Saturday. >> >> -- >> Charley Sheets >> > > > > -- > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - - - - - - - - - - - - > Help open a people-powered common space in Oakland, California! > https://omnicommons.org/donate > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - - - - - - - - - - - - > > > -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years, 1 month

Fwd: [Battlemesh] OpenWrt Summit Session Deadline - this FRIDAY, August 28

by Jenny Ryan

Dublin is a bit far, but just a heads up anyway to follow this conf :) ---------- Forwarded message ---------- From: "Eric Schultz" <eschultz(a)prplfoundation.org> Date: Aug 26, 2015 3:45 PM Subject: [Battlemesh] OpenWrt Summit Session Deadline - this FRIDAY, August 28 To: <battlemesh(a)ml.ninux.org>, <openwrt-hackers(a)openwrt.org>, " cerowrt-devel(a)lists.bufferbloat.net" <cerowrt-devel(a)lists.bufferbloat.net> Cc: First, I promise this is the last reminder of the OpenWrt Summit Session deadline. :) I just wanted to remind folks that the deadline for submitting OpenWrt Summit sessions is this Friday, August 28. We have some great session submissions but we're still looking for YOUR session submission. If you have a topic on OpenWrt you'd like to discuss or want to show off some great work, the OpenWrt Summit is the place to do it! You can submit a session by visiting http://summit.prplfoundation.org and following the instructions. We've tried to make the form simple and straightforward but if you have any questions, don't hesitate to contact me (eschultz(a)prplfoundation.org) If you've never presented at a conference before, we welcome your submissions and participation. We want your views and experiences shared. I'm also happy to help anyone who would like help with their submissions. Lastly, OpenWrt Summit is a welcoming conference and we value the participation of all people. In particular, I want to encourage folks from marginalized communities to submit their sessions, including women and people of color. Your experiences are part of OpenWrt and we welcome your sessions. As always, please contact me if you have any questions or concerns. I look forward to seeing the final sessions that come in from everyone. Thanks everyone again, Eric -- Eric Schultz, Community Manager, prpl Foundation http://www.prplfoundation.org eschultz(a)prplfoundation.org cell: 920-539-0404 skype: ericschultzwi @EricPrpl _______________________________________________ Battlemesh mailing list Battlemesh(a)ml.ninux.org http://ml.ninux.org/mailman/listinfo/battlemesh

9 years, 1 month

Re: [Mesh] mesh Digest, Vol 31, Issue 16

by yar

On Tue, Aug 25, 2015 at 1:23 PM, James Foley <jfoley510(a)gmail.com> wrote: > I have tried 3 times to unsubscribe and followed the directions but it > doesn't work. Please unsubscribe me from the list I've removed you. Please let me know if you have any more trouble. Thanks!

9 years, 1 month

Mesh Brochure

by nicolas weidinger

Hi Team, The mesh brochure is all finished up. All of the files are uploaded here: https://counterculturelabs.org/owncloud/index.php/apps/files/?dir=/Mesh%20B… It includes: - printable PDF (print double sided and fold it in thirds for best results) - SVG files for each graphic in the brochure, for making videos, etc. - Adobe Illustrator and Photoshop files if anyone wants to edit the original I just requested a Wiki account. Will update with new content as soon as the account is approved. There are also a dozen brochures printed out in the sticker bin. Onward!

9 years, 1 month

Re: [Mesh] mesh Digest, Vol 31, Issue 16

by James Foley

I have tried 3 times to unsubscribe and followed the directions but it doesn't work. Please unsubscribe me from the list On Aug 25, 2015 12:55 PM, <mesh-request(a)lists.sudoroom.org> wrote: > Send mesh mailing list submissions to > mesh(a)lists.sudoroom.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://sudoroom.org/lists/listinfo/mesh > or, via email, send a message with subject or body 'help' to > mesh-request(a)lists.sudoroom.org > > You can reach the person managing the list at > mesh-owner(a)lists.sudoroom.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of mesh digest..." > > > Today's Topics: > > 1. Re: [sudo-discuss] Can someone please donate Cat6 Shielded > cable? (danarauz(a)gmail.com) > 2. Re: [sudo-discuss] Can someone please donate Cat6 Shielded > cable? (danarauz(a)gmail.com) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 25 Aug 2015 12:43:44 -0700 > From: "danarauz(a)gmail.com" <danarauz(a)gmail.com> > To: max b <maxb.personal(a)gmail.com> > Cc: sudo-discuss <sudo-discuss(a)lists.sudoroom.org>, > "mesh(a)lists.sudoroom.org" <mesh(a)lists.sudoroom.org>, Charley > Sheets > <rcsheets(a)acm.org> > Subject: Re: [Mesh] [sudo-discuss] Can someone please donate Cat6 > Shielded cable? > Message-ID: > <CAPMS6zb2ApzqNP3jmAy-zd0pm0eN4yum16F883DibLzL3= > UvSg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hey Charley, > > > Many thanks for stepping forward, and about answering your valid questions. > > Actually Max pretty much answered the questions. > But, I would like to add that the small room where the phone line enters > the building has a lot of electrical cables on the ceiling and many of them > go along in part of the path that leads to CCL-Sudoroom area. > > Question two, Termination: > > I totally understand your point about terminating cables properly. > > For example, Cat6A with Cat6A connectors + Cat6A Patch Panels; Shielded > with Shielded; etc.. I brought that up when I was working on the > Netwoork/Reboot ( > https://sudoroom.org/wiki/Network/Reboot#Wishlist_.28in_progress.29) plan. > > Anyhow, like Marx mentioned, this line that we are trying to run at Omni is > a phone line, so it will terminate to a small box by the two post rack, > close to the wall. We will be using just a punch down tool. > > Max, thanks for answering these questions. The only thing I would like to > mention is that we want to stay away from CAT5, if the case is that we > cannot have CAT6 or CAT6A type, then the minimum should be CAT5e (e for > enhanced). ( > > http://midwesttelephone.com/wp-content/uploads/2015/02/Speed-comparrison2.j… > ) > > Thanks! > > Daniel > > On Tue, Aug 25, 2015 at 1:38 AM, max b <maxb.personal(a)gmail.com> wrote: > > > Hey Charley, > > > > You're more than welcome to donate money (or time) if that's more up your > > alley. Also, if you want to donate UTP cat6, we'll take that as well. We > > use a bunch of ethernet cable both at the omni and for other > installations, > > so we can always use more. If you're feeling really generous, we can > really > > use shielded outdoor cat5 and cat6 for installing antennas. Don't worry - > > no matter what kind of ethernet cabling you feel like donating, we can > > almost certainly find a use for it :) > > > > As for the questions you've outlined: > > > > First thing: shielded cable > > > > This isn't actually an ethernet run. It's dsl lines + phone lines running > > over cat copper wires. As such, it's my understanding that it's more > > sensitive to EMI disturbance. Additionally, it's much better to err on > the > > safe side as we'll only want to string this once and the entire network > > communications infrastructure depends on the dsl signal that passes > through > > this line. As for needing shielded mating jacks, we have plenty of > grounded > > rj-45 connectors and with whatever other scenarios, it's pretty easy to > > ensure that they're grounded. We're not talking about our entire network > > infrastructure, we're just talking about this one cable run. > > > > Second thing: hand termination > > > > We're using an EZ RJ-45 crimper, which makes the process fairly > > straightforward. We have spools of other types of ethernet cables and > have > > done runs throughout the building. Also - we'll be breaking out these > pairs > > anyhow, so most of this is fairly non standard types of termination which > > are much easier than rj-45 disconnects. > > > > > > Daniel, let us know if I missed anything here? > > > > > > Max > > > > On Tue, Aug 25, 2015 at 2:01 AM, Charley Sheets <rcsheets(a)acm.org> > wrote: > > > >> Hey Daniel, > >> > >> I am interested in helping out, but I have to admit I'm fairly > >> skeptical of two elements of this request, so I'd like to get some > >> clarification if possible. > >> > >> First thing: shielded cable. My understanding is that most of the noise > >> rejection comes from the twists, not the shielding, and that shielded > >> cable is only useful in high-EMI environments. Am I mistaken about the > >> application, or are we perhaps in a high-EMI environment? The standard > >> example of high EMI is something like a factory floor. Shielding also > >> only works as intended if the mating connectors (jacks and whatnot) are > >> also shielded. Does that apply here? My inclination is to donate > >> standard (UTP) cat6 cable. Please help me understand why I should > >> donate shielded cable instead. > >> > >> Here is some information (could be biased -- it's from a cable > >> supplier) about the differences as they apply to cat6a: > >> http://mirapath.com/blog/item/cat6a-shielded-or-unshielded > >> > >> Second thing: hand termination. You've stated a preference for a box of > >> several hundred feet of cable. To me that implies that you'd prefer to > >> hand terminate the cable rather than having pre-terminated cables. I > >> certainly won't make any claims about your personal ability to > >> terminate cables, but most people are not especially skilled at this, > >> and many hand terminated cables I've seen in the field are visibly not > >> well made. I've terminated cat5 and cat5e cable, and it's always been > >> very fiddly and challenging for me to minimize the untwisted distance, > >> and to ensure there are no open pins. Pre-terminated cable is > >> available with strain relief boots and is often certified to be > >> complaint with the relevant cabling standard. What do you see as the > >> advantage of spools of cable? Why not buy pre-terminated cable? > >> > >> I hope this doesn't come across as overly critical. Sorry if it does. I > >> really just want to make sure we get exactly what we need. > >> -- > >> Charley Sheets > >> > >> _______________________________________________ > >> sudo-discuss mailing list > >> sudo-discuss(a)lists.sudoroom.org > >> https://sudoroom.org/lists/listinfo/sudo-discuss > >> > >> > > > > > -- > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - - - - - - - - - - - > Help open a people-powered common space in Oakland, California! > https://omnicommons.org/donate > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - - - - - - - - - - - >

9 years, 1 month

Can someone please donate Cat6 Shielded cable?

by danarauz＠gmail.com

Hello Sudoers-Meshers: We are having Omni work parties for the last three Saturdays, and we have postpone the wiring run from the point of entry to the Server area, only because we don't have the cable. This line brings the phone+Internet to the omni itself. Guestimating the run is about 70' long. But, if we can get a box of 500' or 1000' would be awesome, so that the rest can be used by the Sudomesh projects as well. Can someone help us out? If we get it by Saturday, I volunteer myself to do this job on Saturday as part of the work party. Many thanks in advance, Daniel -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years, 1 month

Weekly hacknight canceled tonight?

by Marc Juul

I won't be able to make it and I know Max and Alex aren't coming. If someone else wants to still have it you should speak up and un-cancel it! -- marc/juul

9 years, 1 month

Fwd: [sudo-discuss] Photo tid bit: sudomesh is people helping people

by Marc Juul

---------- Forwarded message ---------- From: Romy Ilano <romy(a)snowyla.com> Date: Thu, Aug 20, 2015 at 2:56 PM Subject: [sudo-discuss] Photo tid bit: sudomesh is people helping people To: Sudo Room Discussion List <sudo-discuss(a)lists.sudoroom.org> <https://instagram.com/p/6npShuIUtn/> (see full image <https://instagram.com/p/6npShuIUtn/>) Sent from my iPhone _______________________________________________ sudo-discuss mailing list sudo-discuss(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/sudo-discuss

9 years, 1 month

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

mesh