20 May
2014
20 May
'14
8:54 p.m.
On Tue, May 20, 2014 at 8:35 PM, brad gaffney <bgaffney(a)gmail.com> wrote:
I had two problems with my module, on my Ubuntu 12.04
system.
Thanks you so much for reporting this and for including details!
Could you try to connect to the stationsquare network and then ssh into
your node as root (should be ssh root(a)172.30.0.1) and check if ifconfig
lists an interface called l2tp0 and if the command "batctl o" shows any
other nodes in range? Could you also try to ping 10.42.10.10 (the internet
gateway)?
It sounds like your node is not tunneling to the internet gateway or
something is going wrong with the tunnel. Honestly we've been having issues
with the exit node, so the problem could be at our end, but if you give us
that info from the node we can at least see if it thinks it's connected.
We're working on monitoring tools to better troubleshoot these issues.
Could you also give me the MAC/HWaddr address of the br-openmesh interface
of the node?
--
marc/juul
The admin network stationsquare works fine, but when I
connected to
peoplesopen.net I could not find any name servers.
When I look for help at h.sudomesh.org I get a access forbidden message.
root@reindeer:~ > ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr f4:b7:e2:87:2a:69
inet addr:10.0.37.190 Bcast:10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::f6b7:e2ff:fe87:2a69/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1400 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:183 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:790 (790.0 B) TX bytes:19577 (19.5 KB)
root@reindeer:~ > iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"peoplesopen.net"
Mode:Managed Frequency:2.422 GHz Access Point:
00:15:6D:72:05:26
Bit Rate=54 Mb/s Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=52/70 Signal level=-58 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:188 Missed beacon:0
brad@reindeer:~ > nslookup yahoo.com
;; connection timed out; no servers could be reached
The /etc/resolv.conf file contains
nameserver 127.0.0.1
I replaced this with
nameserver 10.0.37.1
and the name lookups worked, but the browser still could not resolve
names.
That's where I left it.
brad@reindeer:~ > nslookup peoplesopen.net
Server: 10.0.37.1
Address: 10.0.37.1#53
Non-authoritative answer:
Name: peoplesopen.net
Address: 199.175.52.221
Did anyone else have similar issues?
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://lists.sudoroom.org/listinfo/mesh