Ok, here's what I'm thinking. The solar repeater would be more of a
temporary (months?) solution for people outside of the mesh's radius that
want in. It would be a link that mostly works during the day and sunny
ones at that. The people in the repeater chain would receive mesh internet
for some period if they want a permanent solution they can contact
peoplesopen and integrate with a home node. If not, we can always move the
repeater chain and try a new mesh tendril.
A solar repeater would be much quicker to set up, could be done with a 2
person team, and you wouldn't need to interact with the homeowner or go
inside their house. Possibly as short a setup as 30min vs 2hrs to to
integrate a home node.
Nanostation Loco M2 averages 3-4W? That's great news! The panel probably
needs to stay fixed at the 20W size, anything larger than that seems too
expensive and cumbersome to carry and mount without additional hardware.
Definitely need remote voltage and current monitoring Valent, good call.
Are we sure that MPPT is the way to go over PWM? Cost reasons number 1,
but I was worried that the additional micro-controller would eat the power
that was gained in increased efficiency for a low power application like
this.
Jenny, I'm putting 2 of these together as a proof of concept, if the mesh
wants to cover expenses I won't say no :)
On Mon, Apr 2, 2018 at 11:58 AM, Valent Turkovic <valent(a)otvorenamreza.org>
wrote:
Max consider also adding INA219 voltage and current
monitor. You can
connect it via i2c bus to most OpenWrt devices, or add additional ESP8266
that will use INA219 chip to monitor current and voltage.
If you don't have some kind of remote monitoring you will regret it later,
I talk from experience :)
Also using Grafana is great for this, you can see one of our latest setups:
https://imgur.com/a/Z9qhk
Cheers,
Valent.
--
Max Schwartz
maxschwartziv(a)gmail.com
314-578-4503