20 Dec
2013
20 Dec
'13
3:51 p.m.
sudo mesh has been working on this quite a bit, and potentially found some
work arounds, it would be great if there's any new info to add here
https://noisebridge.net/wiki/Sparky#Watchdog_problems.21
On Fri, Dec 20, 2013 at 10:05 AM, Adrian Chadd <adrian(a)freebsd.org> wrote:
Hi,
I've asked someone to send me one. I have the datasheets for the
AR23xx stuff but I don't have any working hardware so I can't help
diagnose what's going on.
If I can get one of each of the CPU types then I can try to figure out
what's going on. I'll also see if there's an external watchdog circuit
somewhere.
Thanks,
-a
On 20 December 2013 09:59, Dana <dana-lists(a)sonic.net> wrote:
--
ThanX,
;+)
https://www.noisebridge.net/wiki/Fort
Hello mesh folks,
I took some donated Sparky boards from Noisebridge with the intention to
use
them as wireless sensor nodes (environmental
monitoring, etc) but while I
can get OpenWRT installed I run into problems with the hardware watchdog
rebooting the device every 5 minutes. It looks like OpenWRT includes
support
for the ar2315 watchdog but something isn't
working. Have you all found a
solution or workaround for this?
Thanks, dana
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
http://lists.sudoroom.org/listinfo/mesh
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
http://lists.sudoroom.org/listinfo/mesh