21 Jun
2015
21 Jun
'15
9:45 p.m.
Hello All,
Could someone please give me the update on the wiring by the corner's
entrance?
when I left today, there was an issue that the existing drill bit was not
long enough.
If making the whole, for the network cable, still not done, please let me
know.
A friend and I can come on Tuesday with a few feel long drill bit to take
care of it.
I just need to confirm my friend that it still needed; so we can meet there
on Tuesday.
Many thanks in advance,
Daniel
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
21 Jun
21 Jun
10:03 p.m.
Daniel,
Marc brought an approximately 2 foot long drill bit, but it still wasn't
long enough to drill all the way through.
So now, we get a longer drill bit or find another way, e.g. re-routing the
cable or devising something creative involving magnets and laser pointers.
L
On Sun, Jun 21, 2015 at 9:45 PM, danarauz(a)gmail.com <danarauz(a)gmail.com>
wrote:
Hello All,
Could someone please give me the update on the wiring by the corner's
entrance?
when I left today, there was an issue that the existing drill bit was not
long enough.
If making the whole, for the network cable, still not done, please let me
know.
A friend and I can come on Tuesday with a few feel long drill bit to take
care of it.
I just need to confirm my friend that it still needed; so we can meet
there on Tuesday.
Many thanks in advance,
Daniel
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - -
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
10:12 p.m.
Hi Lesley, thanks for the update.
My friend, the one I described to you today right before I left, told me
that he has one about 5 feet long and that he can help us on Tuesday late
afternoon-early evening; all i need to do is to confirm to him.
So, can I go ahead and arrange this with him?
Many thanks,
Daniel
On Sun, Jun 21, 2015 at 10:03 PM, Lesley Bell <lbx2045(a)gmail.com> wrote:
Daniel,
Marc brought an approximately 2 foot long drill bit, but it still wasn't
long enough to drill all the way through.
So now, we get a longer drill bit or find another way, e.g. re-routing the
cable or devising something creative involving magnets and laser pointers.
L
On Sun, Jun 21, 2015 at 9:45 PM, danarauz(a)gmail.com <danarauz(a)gmail.com>
wrote:
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Hello All,
Could someone please give me the update on the wiring by the corner's
entrance?
when I left today, there was an issue that the existing drill bit was not
long enough.
If making the whole, for the network cable, still not done, please let me
know.
A friend and I can come on Tuesday with a few feel long drill bit to take
care of it.
I just need to confirm my friend that it still needed; so we can meet
there on Tuesday.
Many thanks in advance,
Daniel
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
_______________________________________________
mesh mailing list
mesh(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/mesh
22 Jun
22 Jun
2:25 a.m.
On Sun, Jun 21, 2015 at 10:03 PM, Lesley Bell <lbx2045(a)gmail.com> wrote:
Daniel,
Marc brought an approximately 2 foot long drill bit, but it still wasn't
long enough to drill all the way through.
I managed to make it work. The cable has been run. It was a super annoying
run both due to the hole being problematic and because the TIL office had
lots of little nooks and crannies and was fully of stuff that needed moving
around.
Other stuff we did today:
Bought more CAT6 (non-shielded since that was all we could get on a Sunday)
and female CAT6 connectors.
Drilled the long hole for the basement cable but it might not quite be wide
enough (since that cable is shielded CAT6) so we will probably need a
slightly wider diameter very long drill bit.
Finished running the CCL node cable.
Crimped the ends for the CCL node and the Disco Room node.
Still To Do:
Add female ethernet ports to each end of La Commune to Public Terminals
cable
Mount La Commune node on wall
Finish running the basement cable.
Mount basement node.
Run a cable up over the upstairs bathroom, above the false ceiling and
terminate at the upstairs public terminals. We will place a switch here
which will connect to the cable going to La Commune via the TIL office.
This should be a fairly easy run as only about 1/3 of the total run needs
to be run nicely along a wall with cable clip nails.
Test all cables and apply PoE.
Configure all nodes.
--
marc/juul
8:41 a.m.
Marc,
Before I read your reply I had already confirmed with Mike about tomorrow
Tuesday, I don't want to cancel if we can still use his help and tools.
Do you feel that I should retain the appointment and work in the basement
with him instead?
Would it be useful? I am asking because I haven't observe what is going on
the basement; so I am not sure.
In addition to what you said it is pending, would be nice if someone has a
cable tester (I cannot find mine) to make sure all pairs are correctly in
place.
Daniel
On Mon, Jun 22, 2015 at 2:25 AM, Marc Juul <juul(a)labitat.dk> wrote:
On Sun, Jun 21, 2015 at 10:03 PM, Lesley Bell <lbx2045(a)gmail.com> wrote:
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Daniel,
Marc brought an approximately 2 foot long drill bit, but it still wasn't
long enough to drill all the way through.
I managed to make it work. The cable has been run. It was a super annoying
run both due to the hole being problematic and because the TIL office had
lots of little nooks and crannies and was fully of stuff that needed moving
around.
Other stuff we did today:
Bought more CAT6 (non-shielded since that was all we could get on a
Sunday) and female CAT6 connectors.
Drilled the long hole for the basement cable but it might not quite be
wide enough (since that cable is shielded CAT6) so we will probably need a
slightly wider diameter very long drill bit.
Finished running the CCL node cable.
Crimped the ends for the CCL node and the Disco Room node.
Still To Do:
Add female ethernet ports to each end of La Commune to Public Terminals
cable
Mount La Commune node on wall
Finish running the basement cable.
Mount basement node.
Run a cable up over the upstairs bathroom, above the false ceiling and
terminate at the upstairs public terminals. We will place a switch here
which will connect to the cable going to La Commune via the TIL office.
This should be a fairly easy run as only about 1/3 of the total run needs
to be run nicely along a wall with cable clip nails.
Test all cables and apply PoE.
Configure all nodes.
--
marc/juul
9:09 a.m.
On Mon, Jun 22, 2015 at 8:41 AM, danarauz(a)gmail.com <danarauz(a)gmail.com>
wrote:
Marc,
Before I read your reply I had already confirmed with Mike about tomorrow
Tuesday, I don't want to cancel if we can still use his help and tools.
Do you feel that I should retain the appointment and work in the basement
with him instead?
Would it be useful? I am asking because I haven't observe what is going on
the basement; so I am not sure.
We could do the basement tomorrow. We definitely need a drill that we don't
have. I can be there if you let me know the time. Text me with textsecure:
+1 510 717 4275
In addition to what you said it is pending, would be nice if someone has a
cable tester (I cannot find mine) to make sure all pairs are correctly in
place.
Yes that would be very useful
--
marc/juul
10 a.m.
ok, that would do.
On Mon, Jun 22, 2015 at 9:09 AM, Marc Juul <juul(a)labitat.dk> wrote:
On Mon, Jun 22, 2015 at 8:41 AM, danarauz(a)gmail.com <danarauz(a)gmail.com>
wrote:
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Marc,
Before I read your reply I had already confirmed with Mike about tomorrow
Tuesday, I don't want to cancel if we can still use his help and tools.
Do you feel that I should retain the appointment and work in the basement
with him instead?
Would it be useful? I am asking because I haven't observe what is going
on the basement; so I am not sure.
We could do the basement tomorrow. We definitely need a drill that we
don't have. I can be there if you let me know the time. Text me with
textsecure:
+1 510 717 4275
In addition to what you said it is pending, would be nice if someone has
a cable tester (I cannot find mine) to make sure all pairs are correctly in
place.
Yes that would be very useful
--
marc/juul
23 Jun
23 Jun
2:35 p.m.
Confirming for today wiring work, Mike and I will be arriving between
4-4:30.
Thanks.
On Mon, Jun 22, 2015 at 10:00 AM, danarauz(a)gmail.com <danarauz(a)gmail.com>
wrote:
ok, that would do.
On Mon, Jun 22, 2015 at 9:09 AM, Marc Juul <juul(a)labitat.dk> wrote:
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
On Mon, Jun 22, 2015 at 8:41 AM, danarauz(a)gmail.com <danarauz(a)gmail.com>
wrote:
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - -
Marc,
Before I read your reply I had already confirmed with Mike about
tomorrow Tuesday, I don't want to cancel if we can still use his help and
tools.
Do you feel that I should retain the appointment and work in the
basement with him instead?
Would it be useful? I am asking because I haven't observe what is going
on the basement; so I am not sure.
We could do the basement tomorrow. We definitely need a drill that we
don't have. I can be there if you let me know the time. Text me with
textsecure:
+1 510 717 4275
In addition to what you said it is pending, would be nice if someone has
a cable tester (I cannot find mine) to make sure all pairs are correctly in
place.
Yes that would be very useful
--
marc/juul
3237
days inactive
3238
days old
7 comments
3 participants
participants (3)
-
danarauz＠gmail.com -
Lesley Bell -
Marc Juul