Looks great, thanks for updating it! On 11/14/19, Matt Senate <mattsenate(a)gmail.com> wrote: _______________________________________________ mesh mailing list mesh(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/mesh

This is awesome, thank you Matt!!! (and hi D <3) Robb and I worked on a walkthrough video last year, which we should

On Thu, Nov 14, 2019 at 8:48 PM danarauz(a)gmail.com &lt;danarauz(a)gmail.com&gt;

> > Yay! I will be using that updated version of the walkthrough, pretty

> > Thanks Matt! > On Thu, Nov 14, 2019 at 6:14 PM Marc Juul &lt;marc(a)juul.io&gt; wrote: >> >> Looks great, thanks for updating it! >> >> On 11/14/19, Matt Senate &lt;mattsenate(a)gmail.com&gt; wrote: >> > hey all, >> > >> > I recently flashed a node, so I updated the walkthrough to hopefully

hey all, I recently flashed a node, so I updated the walkthrough to hopefully be easier for others to follow, please review! https://sudoroom.org/wiki/Mesh/WalkThrough - Matt _______________________________________________ mesh mailing list mesh(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/mesh

Wow those are great photos, Daniel. I haven't gotten around to adding them yet, but I did try to make the configuration section a little clearer. On Nov 16 2019, at 3:59 am, danarauz(a)gmail.com wrote: I flashed a new router tonight, and here is my so so report. 1. Uploading not working on Ubuntu Spanish version, I used Firefox. After five or six resets and not being able to upload the firmware, I switched to a MacOS machine. It just came to mind that, perhaps, Firefox in the Ubuntu machine, needed JavaScript enabled. 2. Using Brave browser, on MacOS Mojave 10.14.6, the upload and countdown worked on the first try, and the rest of the process went fine. 3. It produces a bit of wonder when connected to the PON SSID was just out, and not connecting to the Internet yet. I didn't know how long would the auto-configuration would take. Even now I am not sure how long it took. 15mins? 10? 4. About the paragraph that says: “Note: If you installed release 0.3.0 <https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0> for myNet N600 routers, your node can be autoconfigured. You will not need to use the previous solution makenode, otherwise you may need to read the (instructions further down <https://sudoroom.org/wiki/Mesh/WalkThrough#Makenode_.28v.0.2.3_and_earlier.29> *)”* Can that all be removed or modified with something shorter or like this?: Note: If you did NOT install release 0.3.0 <https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0> for myNet N600 routers, please skip this section and go to step: “Blah Blah”. 5. An observation:. When connected the node, via ssh, I found the " config_succeeded" file with instructions on how to update passwords, and says to delete the line that reads "* */12 * * * /opt/mesh/pw_reset" But, when checking cron, the only line there says: "0 * * * * /opt/mesh/pwd_reset" 6. I am not modifying anything on the wiki, but i am providing some photos taken tonight during the flashing of the router. Feel free to use them if you want. Location: https://danielarauz.com/peoples-open-network/ Thanks! D On Thu, Nov 14, 2019 at 10:08 PM Matt Senate &lt;mattsenate(a)gmail.com&gt; wrote: Glad folks are finding it useful! I'll probably be running another install soon, so I'll see if anything comes up. Please add notes too! As for the video, I think the fastest solution is to upload a screenshot as a thumbnail and link it to the full video on the peoples open website. Otherwise, yeah I believe you have to install an extension for either YouTube, embedded video, or embedded iframes. On Thursday, November 14, 2019, Jenny Ryan &lt;jenny(a)jennyryan.net&gt; wrote: probably link to (can we embed youtube videos on mediawiki pages?) - It's on this page and I'll put it in this thread for reference to add when I have more time (unless someone beats me to it ;): https://peoplesopen.net/learn/ wrote: soon (I am waiting for a router I ordered recently). be _______________________________________________ mesh mailing list mesh(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/mesh

All, Glad everyone is excited and we are making a lot of improvements! Is this diagram accurate? https://sudoroom.org/wiki/File:Nodeports_titles.png If so, should we provide stickers on the routers to label the ports? Also does the dynamic diagram in the admin interface indicate if someone used the wrong port? Daniel, I'm happy to help put the photos in and add your edit to the wikis. Do you want to meet up? I am planning to flash another node and an extender node (or two) this week as well. Then I'll update the Extender Node walk through https://sudoroom.org/wiki/Mesh/Flashing_extender_nodes I was thinking Sunday when folks normally meet up to do mesh stuff, but possibly other days before then too. - Matt On Tue, Nov 19, 2019 at 11:09 PM danarauz(a)gmail.com &lt;danarauz(a)gmail.com&gt; wrote: > Super!! Happy that you like the photos Benny! > > Daniel > > > > On Tuesday, November 19, 2019, Benny Benny &lt;bennlich(a)gmail.com&gt; wrote: > >> Wow those are great photos, Daniel. I haven't gotten around to adding >> them yet, but I did try to make the configuration section a little clearer. >> >> On Nov 16 2019, at 3:59 am, danarauz(a)gmail.com wrote: >> >> I flashed a new router tonight, and here is my so so report. >> >> 1. Uploading not working on Ubuntu Spanish version, I used Firefox. >> After five or six resets and not being able to upload the firmware, I >> switched to a MacOS machine. >> It just came to mind that, perhaps, Firefox in the Ubuntu machine, >> needed JavaScript enabled. >> >> 2. Using Brave browser, on MacOS Mojave 10.14.6, the upload and >> countdown worked on the first try, and the rest of the process went fine. >> >> 3. It produces a bit of wonder when connected to the PON SSID was just >> out, and not connecting to the Internet yet. >> I didn't know how long would the auto-configuration would take. Even now >> I am not sure how long it took. 15mins? 10? >> >> 4. About the paragraph that says: >> “Note: If you installed release 0.3.0 >> <https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0> for >> myNet N600 routers, your node can be autoconfigured. You will not need to >> use the previous solution makenode, otherwise you may need to read the (instructions >> further down >> <https://sudoroom.org/wiki/Mesh/WalkThrough#Makenode_.28v.0.2.3_and_earlier.29> >> *)”* Can that all be removed or modified with something shorter or like >> this?: Note: If you did NOT install release 0.3.0 >> <https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0> for >> myNet N600 routers, please skip this section and go to step: “Blah Blah”. >> >> 5. An observation:. When connected the node, via ssh, I found the " >> config_succeeded" file with instructions on how to update passwords, >> and says to delete the line that reads "* */12 * * * /opt/mesh/pw_reset" >> But, when checking cron, the only line there says: "0 * * * * >> /opt/mesh/pwd_reset" >> >> 6. I am not modifying anything on the wiki, but i am providing some >> photos taken tonight during the flashing of the router. Feel free to use >> them if you want. Location: >> https://danielarauz.com/peoples-open-network/ >> >> Thanks! >> >> D >> >> >> On Thu, Nov 14, 2019 at 10:08 PM Matt Senate &lt;mattsenate(a)gmail.com&gt; >> wrote: >> >> Glad folks are finding it useful! I'll probably be running another >> install soon, so I'll see if anything comes up. Please add notes too! >> >> As for the video, I think the fastest solution is to upload a screenshot >> as a thumbnail and link it to the full video on the peoples open website. >> >> Otherwise, yeah I believe you have to install an extension for either >> YouTube, embedded video, or embedded iframes. >> >> On Thursday, November 14, 2019, Jenny Ryan &lt;jenny(a)jennyryan.net&gt; wrote: >> > This is awesome, thank you Matt!!! (and hi D <3) >> > >> > Robb and I worked on a walkthrough video last year, which we should >> probably link to (can we embed youtube videos on mediawiki pages?) - It's >> on this page and I'll put it in this thread for reference to add when I >> have more time (unless someone beats me to it ;): >> https://peoplesopen.net/learn/ >> > >> > On Thu, Nov 14, 2019 at 8:48 PM danarauz(a)gmail.com &lt;danarauz(a)gmail.com&gt; >> wrote: >> >> >> >> Yay! I will be using that updated version of the walkthrough, pretty >> soon (I am waiting for a router I ordered recently). >> >> >> >> Thanks Matt! >> >> On Thu, Nov 14, 2019 at 6:14 PM Marc Juul &lt;marc(a)juul.io&gt; wrote: >> >>> >> >>> Looks great, thanks for updating it! >> >>> >> >>> On 11/14/19, Matt Senate &lt;mattsenate(a)gmail.com&gt; wrote: >> >>> > hey all, >> >>> > >> >>> > I recently flashed a node, so I updated the walkthrough to >> hopefully be >> >>> > easier for others to follow, please review! >> >>> > >> >>> > https://sudoroom.org/wiki/Mesh/WalkThrough >> >>> > >> >>> > - Matt >> >>> > >> >>> _______________________________________________ >> >>> mesh mailing list >> >>> mesh(a)lists.sudoroom.org >> >>> https://sudoroom.org/lists/listinfo/mesh >> >> >> >> _______________________________________________ >> >> mesh mailing list >> >> mesh(a)lists.sudoroom.org >> >> https://sudoroom.org/lists/listinfo/mesh >> > >> >> _______________________________________________ >> mesh mailing list >> mesh(a)lists.sudoroom.org >> https://sudoroom.org/lists/listinfo/mesh >> >>

On Wed, Nov 20, 2019 at 9:11 AM Matt Senate &lt;mattsenate(a)gmail.com&gt; wrote: It is accurate! If so, should we provide stickers on the routers to label the ports? The sticker design I made! It lives in our propaganda repo, which I'm sure you'll love, Matt :) https://github.com/sudomesh/propaganda/tree/master/stickers/router_ports I believe Seth deployed the last printed sticker last night for a node to be deployed at PLACE! So, action item is to print more (there's sticker paper in the Omni Office) > Also does the dynamic diagram in the admin interface indicate if someone > used the wrong port? I don't believe so - that'd be a nice feature request for sudowrt-firmware <https://github.com/sudomesh/sudowrt-firmware>! (iirc, the admin dashboard is bundled in that repo, and benny @bennlich would know best) Daniel > I'm happy to help put the photos in and add your edit to the wikis. Do > you want to meet up? I am planning to flash another node and an extender > node (or two) this week as well. Then I'll update the Extender Node walk > through https://sudoroom.org/wiki/Mesh/Flashing_extender_nodes > I was thinking Sunday when folks normally meet up to do mesh stuff, but > possibly other days before then too. Would you be down to help us reboot Sunday BYOI Office Hours (2-5pm)? You don't have to commit longitudinally, but would be a nice thing to start up again. Not sure I can make it this weekend, as it's fairly busy, but will be around Omni on Saturday from 5pm on for assist on an evening event (and training on the Meyers!) <3 Jenny

I had to log in to the router and check `ip addr` to see if the config server had correctly set IPs -- there had been an issue with the server at the time. On Thu, Nov 21, 2019 at 2:04 AM danarauz(a)gmail.com &lt;danarauz(a)gmail.com&gt; wrote: > > “Huston we got a problem!” > > The two PON Networks are broadcasting, from the newly flashed router, but > without Internet connectivity. > > I can not tell if this issue is new or if these two networks had not > worked since the day I flashed the router. I had the router unplugged for a > day or so, while in transition to its new physical location. > > “babeld -i“ is showing several other nodes in the mesh. > > Any suggestions? > > Thanks, > > D > > > > On Thu, Nov 21, 2019 at 2:26 AM Jenny Ryan &lt;jenny(a)jennyryan.net&gt; wrote: > >> On Wed, Nov 20, 2019 at 9:11 AM Matt Senate &lt;mattsenate(a)gmail.com&gt; >> wrote: >> >>> All, >>> >>> Glad everyone is excited and we are making a lot of improvements! >>> >>> Is this diagram accurate? >>> https://sudoroom.org/wiki/File:Nodeports_titles.png >>> >> >> It is accurate! >> >> If so, should we provide stickers on the routers to label the ports? >>> >> >> The sticker design I made! It lives in our propaganda repo, which I'm >> sure you'll love, Matt :) >> https://github.com/sudomesh/propaganda/tree/master/stickers/router_ports >> I believe Seth deployed the last printed sticker last night for a node >> to be deployed at PLACE! So, action item is to print more (there's sticker >> paper in the Omni Office) >> >> >>> Also does the dynamic diagram in the admin interface indicate if >>> someone used the wrong port? >>> >> >> I don't believe so - that'd be a nice feature request for >> sudowrt-firmware <https://github.com/sudomesh/sudowrt-firmware>! (iirc, >> the admin dashboard is bundled in that repo, and benny @bennlich would know >> best) >> >> Daniel >>> >>> I'm happy to help put the photos in and add your edit to the wikis. Do >>> you want to meet up? I am planning to flash another node and an extender >>> node (or two) this week as well. Then I'll update the Extender Node walk >>> through https://sudoroom.org/wiki/Mesh/Flashing_extender_nodes >>> >>> I was thinking Sunday when folks normally meet up to do mesh stuff, but >>> possibly other days before then too. >>> >> >> Would you be down to help us reboot Sunday BYOI Office Hours (2-5pm)? >> You don't have to commit longitudinally, but would be a nice thing to start >> up again. >> Not sure I can make it this weekend, as it's fairly busy, but will be >> around Omni on Saturday from 5pm on for assist on an evening event (and >> training on the Meyers!) >> >> <3 >> Jenny >> >