[mesh-dev] Route selection question

I thought I understood how route selection works: Most specific route is always selected. So if you have a route for 10.0.0.0/8 and another for 10.0.0.0/24 then the /24 will be selected when the destination falls within the /24 This works as expected. However, if I add a /32 route e.g. 10.0.0.42/32 then it gets prioritized _lower_ than the /8 and /24 Why does this happen and is there anything I can do about it? Example: 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.1 10.0.0.0/8 dev eth0 proto kernel scope link src 10.0.0.1 10.0.0.42 dev eth0 proto kernel scope link src 10.0.0.1 Aaaa! Why is the /32 all the way at the bottom? In other news: Made some progress on extender node stuff tonight. I decided to use VLANs to put both the open and adhoc networks on the extender nodes and have updated the configs for tp-link and extender node accordingly. -- marc/juul