access

access@sudoroom.org

105 discussions

by Yardena Cohen

On Tue, Feb 14, 2017 at 2:22 PM, joseph liesner <blue393(a)lmi.net> wrote: > I gave my key card to a merry group of thespians > rehearsing in Our Disco Room. Could one of you > authenticate the card I slid thricely at 9;29 am today, 2/14. I don't understand. You gave them your old card and now you're making a new card for yourself? You'll need to swipe it again. It looks like somebody rebooted the door computer and the error log was erased. CC'ing access list

7 years, 2 months

front door beaglebone black turns itself off sometimes?

by Jake

last night Lesley and I went to see what was wrong with the front door computer, because it was not responding on the network. Unfortunately sudobot did not alert us to the fact, but Lesley noticed. anyway, perhaps related to the table setup in front of the cafe bench, the loosely-hanging extension cord duct-taped to the outlet on the east wall, which powers the network switch near the front door computer, may have come loose. I plugged it back in but then looked at the beaglebone black and it was totally dark, powered off, which i've seen before. why would a beaglebone black turn itself off? i unplugged the TWO usb cables going into the cylindrical USB power socket (which takes 12V from the backup battery) and then plugged them back in. This is necessary since the second USB cord powers the hub and the magnetic stripe reader won't recognize properly if it's not power-cycled with the beaglebone. after this everything worked, but i still have no idea why the beaglebone was off. also i wish sudobot would tell us when it fails to connect to omnidoor! -jake On Wed, 15 Feb 2017, Yardena Cohen wrote: > On Tue, Feb 14, 2017 at 2:22 PM, joseph liesner <blue393(a)lmi.net> wrote: >> I gave my key card to a merry group of thespians >> rehearsing in Our Disco Room. Could one of you >> authenticate the card I slid thricely at 9;29 am today, 2/14. > > I don't understand. You gave them your old card and now you're making > a new card for yourself? > > You'll need to swipe it again. It looks like somebody rebooted the > door computer and the error log was erased. > > CC'ing access list > _______________________________________________ > access mailing list > access(a)lists.sudoroom.org > https://sudoroom.org/lists/listinfo/access >

7 years, 2 months

Please recheck your delivery address USPS parcel 330810415

by USPS Home Delivery

Hello, This is to confirm that your item has been shipped at Wed, 15 Feb 2017 03:34:35 +0100. Please check the attachment for details! Yours faithfully. Sonja Hogans - USPS Parcels Operation Agent.

7 years, 2 months

Delivery problem, parcel USPS #307640581

by USPS Delivery

Hello, USPS courier was unable to contact you for your parcel delivery. Please check delivery label attached! Kind thoughts. Mickey Nazarimasihi - USPS Operation Manager.

7 years, 2 months

Re: [sudo-access] Front Door access w/ card

by Jake

Hi Steven, I put you into the system with that card, please let me know if it works for you. when you swipe into the building, our chat channels' bot will introduce you as "Steven Low" if you would like to use a handle or nickname, or just be anonymous, please let me know. thanks -jake On Fri, 20 Jan 2017, Steven Low wrote: > > Hi Omni, > > This is Steven Low, facilitator of The East Solo Performance Lab sponsored through BAPS. Tonight 1/19 at 5:50pm I swiped a magnetic card through the front door reader 6 times. > > I would like to have an access card for the Omni front door as there are times when there's no one in the building to open the door when I am conducting a performance workshop. Let me know if you have any questions. Thanx!!!!! > > Steven Low >

7 years, 2 months

Re: [sudo-access] Omni door

by Jake

ok i did it. although i see that your previous card worked 8 times in a row this morning at 10:45am did the door not open for you then? On Thu, 9 Feb 2017, Alan Rockefeller wrote: > Still not working today - I guess my expired Wells Fargo credit cards just > don't work well with the system. > > > I just swiped a different kind of card 10 times two minutes ago. Please > update the records. > > Thank you!! > > -Alan >

7 years, 2 months

help build a motorized front-door opener for omni commons

by Jake

note: this email goes to four lists. Please reply only to the Access and Building lists to avoid clogging Omni and Sudo lists with this thread. I just want to bump this thread and see if anyone is available to work on the physical aspects of the door opener I describe below, and as shown in this diagram: http://spaz.org/~jake/pix/omnidoormotor1.png I am willing to do the electronics part of it and make it work with our existing system, but I would like others to help with the building of a bracket to hold the motor in place over the door, and the woodwork and nuts&bolts of making the 2x2 stick with steel cable attached to it. -jake On Tue, 17 Jan 2017, Jake wrote: > the wheelchair motor that Robb wanted to use for a projection screen > raise/lower thing is something else. > > The motor I want to use for the front door opener is this one: > > http://imgur.com/gallery/MLuT7 > > it's in sudoroom in a milk crate. Robb and I remove the wheel and the tire, > and now it's ready for the motor to be mounted on a bracket that will hold it > in the right place, which is slightly higher than the top of the door, and > basically 2' south of the door's hinges. > > then, a 2x2 of wood will attach to the top corner of the door with a hinge, > and > it will have a cord of this rubber-wrapped steel cable (which I have) go from > one end of the 2x2 to the other, taking a couple of turns around the motor > wheel. It will look like this: > > http://spaz.org/~jake/pix/omnidoormotor1.png > > as you can see from this diagram, when the motor turns its wheel clockwise > (as > viewed from above) the 2x2 stick will be pushed in the direction that opens > the > door. If it's not clear, the rubber-wrapped steel cable (shown in red/black > stripes) is attached to the 2x2 stick at both ends, but it makes a couple of > turns around the wheel of the motor on its way. > > anyway, i chose this motor because when it's not being energized with > electricity, it's free-moving which means it won't interfere with regular > door > movement. But when we activate it, it will be strong enough to open or close > the door as we tell it to do. > > The issues you mention about battery backup are not a problem. We already > have > a battery backup for the front door card (and soon RFID) access system, and > this motorized thing will be battery-backed as well. > > I am willing to do the electrical part of this project, and I have already > acquired the rubber-coated steel cable and motor, but I ask that other people > take care of mounting the motor on a suitable frame above the door and help > make the 2x2 stick on a hinge which will attach to the door. > > I will be at sudoroom tomorrow night (tuesday night at 7) in case anyone > wants > to meet with me about this. > > -jake > > On Mon, 16 Jan 2017, David Keenan wrote: > >> I remember hearing about that wheelchair motor -- if it's the same one, >> last I heard Robb had wanted to use it to raise/lower a projection screen >> for the stage..? So I didn't think of it for this project, but if we can >> use it and save ourselves some money, that's great! >> >> I realize you may have already considered this aspect but as a DIY opener >> will also need to comply with code requirements, do you think you can >> design a system measurably compliant with: >> >> - opening / closing force (<5lb) and speed (max. *N* seconds to close) >> requirements throughout the swing, during automatic operation and manual >> operation per ANSI/BHMA A156.19 for low-energy-operated doors, ICC A117.1, >> ADA and whatever may be found in CBC? >> >> - req'd UPS / backup battery power for opener, for *N* many operations >> (need to look it up) >> >> - compliant location of upper and lower door actuators (buttons), assume >> this will be no issue >> >> If it's helpful, here is a decent article I found that glosses the subject >> of codes for low-energy openers: >> http://www.constructionspecifier.com/understanding-new-accessibility-requir… >> <http://www.constructionspecifier.com/understanding-new-accessibility-requir…> >> >> Given the above, and I realize I only now just brought this up to you, but >> I guess my only concern about any DIY implementation is, if you / access >> group has the time to implement it relatively soon..? E.g., do you think it >> might be possible to complete in the next 2-3 weeks or so..? >> >> I realize perhaps that is an unfair question to ask before you've really >> started hacking on it, but I'm also trying to be realistic and pragmatic >> wrt to how busy everyone is and the understandably extended timelines of >> volunteer labor in general that comprises the bulk of omni efforts -- >> >> If after reviewing the door req's, you think a DIY system is doable in the >> next 2-3 wks, let me know how / when I can help hack on this and I will >> follow up with you and access control group directly -- and perhaps we can >> set a date to meet up about it? >> >> Best, >> David >> >> On Mon, Jan 16, 2017 at 12:20 AM, Maureen Muldavin <muldavin.m(a)gmail.com> >> wrote: >> >>> If you are working on RFID cards any possibility that the entrance to >>> sudo/ccl could get a card reader? Been wanting access control for >>> awhile. >>> >>> On Sun, Jan 15, 2017 at 11:46 PM, Jake <jake(a)spaz.org> wrote: >>>> i brought in a wheelchair motor a while ago that I think could be made >>> into >>>> a >>>> power door-opener pretty well. >>>> >>>> I can work on a proof-of-concept for that and then be able to show you >>> what >>>> I >>>> mean, and then we can see if it will be good enough for our needs as >>> opposed >>>> to >>>> spending $2800 on a "proper" door opener. >>>> >>>> as for the RFID cards, Alex and I have been working on implementing the >>> card >>>> reader thing for a little while and I think I can add it to the front >>> door >>>> pretty relatively easily.., and I guess i'll do that first, rather than >>>> trying >>>> to do a storage closet first? >>>> >>>> as always, if anyone wants to participate in this process they should >>>> definitely jump in, otherwise it's subject to my chaotic schedule. >>>> >>>> technical questions about making this happen should be sent to the access >>>> list >>>> and possibly the sudoroom list, but probably not the building list as it >>>> will >>>> be a major distraction if we get into the weeds of microcontroller boards >>>> and >>>> door server code... >>>> >>>> also, yes I do have the box of RFID stuff you ordered and i've been >>> working >>>> on >>>> it~ >>>> >>>> -jake >>>> >>>> On Sun, 15 Jan 2017, David Keenan wrote: >>>> >>>>> Hi Jake / access control folks - >>>>> >>>>> So now that our front door is publicly labelled as accessible, we need >>> to >>>>> install an automatic door opener & remote button (kickplate & >>> hand-height >>>>> or a long bar) to make it legal. >>>>> >>>>> Reason I bring this up to you guys is, the opener system will need to >>>>> integrate into our existing/future access control somehow. The quote I >>> got >>>>> is $2800 (50% parts, 50% labor) for a package including the Open Sesame >>>>> Model 233 (brochure >>>>> <http://www.opensesamedoor.com/index_htm_files/open_sesame_brochure.pdf >>>> , >>>>> spec >>>>> sheet <http://www.opensesamedoor.com/index_htm_files/specs_model233.pdf >>>> ), >>>>> >>>>> made in San Leandro. >>>>> >>>>> Also, some of us met last week re: sketching out Omni's accessibility >>>>> plan, >>>>> and Yar suggested this might be a good time to also implement RFID >>> system >>>>> for the front door, if that was possible? In part because, proximity to >>> an >>>>> RFID fob is more accessible than a card swipe which (after thinking >>> about >>>>> it) I realized requires a pincing motion that is likely not ADA... >>> because >>>>> of the excessive door opening pressure and iffy slope on the front >>>>> landing, >>>>> we need an RFID & auto-opener. >>>>> >>>>> So -- I'm not sure if any more work has been done on the RFID systems I >>>>> put >>>>> in sudo a little while ago (stashed in under-stair storage area), might >>> it >>>>> be possible to integrate these into the door opener? I note in the >>>>> brochure >>>>> they offer a keypad access option - perhaps an opportunity for 2-factor >>>>> authentication like Marc had talked about? Anyhow what do you guys >>> think? >>>>> >>>>> I apologize for not helping y'all more with a better access control >>> system >>>>> (helping spaces post-ghostship consumed my bandwidth), but as there is >>> now >>>>> renewed pressure I want to help as I can. Would installing a trial >>>>> RFID/throw on the Omni Office for example still be helpful towards >>> getting >>>>> this nailed down? Lmk >>>>> >>>>> Fwiw - I see the opener as pressing at this point not just 'cause its >>> long >>>>> overdue, but because every day our front door is labelled as accessible >>>>> when it's technically not, is actually a not-insignificant liability >>> issue >>>>> (accessibility lawsuit). Plus of course, we are still under scrutiny by >>>>> the >>>>> city, nimby neighbors trying to call us out for bogus reasons, etc etc. >>>>> And >>>>> per building code the front door must be made fully accessible before >>> any >>>>> other accessibility work starts on the rest of the building - at some >>>>> point >>>>> an inspector's gonna notice since they all go through that door..anyhow. >>>>> >>>>> Let me know how myself & those of us working on accessibility might be >>>>> able >>>>> to help - >>>>> >>>>> Best, >>>>> David >>>>> >>>> >>> >> > _______________________________________________ > access mailing list > access(a)lists.sudoroom.org > https://sudoroom.org/lists/listinfo/access >

7 years, 3 months

New status of your USPS delivery code: 65482303

by USPS Home Delivery

Hello, This is to confirm that your item has been shipped at Tue, 31 Jan 2017 06:01:23 +0300. Please check delivery label attached! With thanks and appreciation. Elie Loury - USPS Station Manager.

7 years, 3 months

Re: [sudo-access] Omni door

by Jake

the problem is that the way our card reader is currently configured makes it impossible to differentiate between good reads of readable cards, and the myriad ways the card reader says "I WAS UNABLE TO READ THAT CARD PROPERLY" because the software takes the KEYBOARD SCAN CODES sent by the reader (because it pretends to be a keyboard) and HASHED THE SCAN CODES SEQUENCE through a trapdoor algorithm... so we have no way to know what was scanned. this means that many people had the door code equivalent of "CARD READ ERROR" which meant that anyone could swipe any card in the reader, in a way where it would say "CARD READ ERROR" or whatever, and get the door open. we hacked a kludge into the software a while ago that would count the number of keyboard scan codes that came from the card reader, before they go through the trapdoor algorithm, and just throw out anything shorter than 100 characters, which presumably includes the error codes. i have no idea how your card could have been mangled in a way that it's still reading (which means its checksum is intact) but that it's different from before. I think it means that the present reading of your car is an error code (that's longer than 100 bytes i guess) don't worry, it's not your problem. we'll eventually figure out a way to fix it i guess. we're certainly going to add an RFID system, hopefully with a more sustainable design, and maybe someday phase out the magstripe cards entirely? I don't know. note: door access email list is CC'd to this message. -jake On Sat, 21 Jan 2017, Alan Rockefeller wrote: > I will try when I get back there. > > The card I was using to get into Omni did not change - The checksum > changed, but it was definitely the same card - my old, scratched up credit > card. > > I think what happened is I stored two cards right next to each other in my > wallet, and a bit flipped. > > Thanks for looking into this! > > -Alan >

7 years, 3 months

Re: [sudo-access] let's fix sudobot to warn us when omnidoor is down

by Jake

it would have been nice if sudobot had alerted us to the fact that it was not hearing back from the front door computer, but i think that functionality has been disabled? I can't tell why it doesn't work. https://github.com/sudoroom/sudobot fixing the bot, so it alerts us when there is a problem, should be our next step toward higher reliability of the front door system. does anyone volunteer to do that? it's running on the sudoroom server (in the building) under its own username, using psy as a process manager. -jake On Mon, 16 Jan 2017, Jake wrote: > i don't see any difference between the way it looks in image 5817 and the way > it's looked for months... the bottom screw may have fallen out (it wasn't > really sticking into anything anyway) but it also may have been missing for a > long time. > > in the second image, 5819, it looks like someone pushed it to the left on its > one screw. > > i'll go there later tonight to see what's going on. > > for right now, i see that I can't even log into the front door computer. It > has an internal battery backup, so if it was unplugged from AC it should have > said something in IRC about the battery getting low. I said a while ago that > we needed a dedicated ethernet to it, since presently its ethernet connection > is passing through a switch which can get unplugged easily, instantly > disconnecting it from the internet and its ability to alert us to problems. > > my guess is that the switch and the door computer both got unplugged from > electricity, and the battery ran out (with no way to alert us) and then > people > started messing with the card reader since it wasn't working to let them in. > > -jake > > On Mon, 16 Jan 2017, Yardena Cohen wrote: > >> It looks like somebody handled it roughly. It's partially falling off >> and the wires are messed up. >> > _______________________________________________ > access mailing list > access(a)lists.sudoroom.org > https://sudoroom.org/lists/listinfo/access >

7 years, 3 months

← Newer
1
2
3
4
5
6
7
8
...
11
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

access