[mesh-dev] VLAN diagram attempt

Here's my shitty first attempt at diagram to illustrate how it all hangs together with vlan, bridging and tunnels: https://i.imgur.com/B0jzM9h.jpg Hopefully this can inform a better diagram made The big thing in the middle is a home node. The chunky things sticking out of it to the left are antennas. The two things on the right are extender nodes. The numbers are VLAN IDs. As you can see there is one VLAN for the open network (VLAN 10), one VLAN for the private network (VLAN 11) and then one VLAN per extender node for the mesh network (VLANs 1 and 2). You can see that the private and public network interfaces are connected together between wifi, ethernet, home and extender nodes by putting the interfaces on the same VLAN (for ethernet) and then bridging to the wifi interfaces. The mesh network interfaces are connected together by enabling babeld on all of them, or in the case of the connection between home and extender nodes they are connected by being on the same VLAN. On this diagram all three networks are available on all radios both on home and extender nodes. This is not yet fully implemented, but it is a small enough change that we should be able to finish it this week. -- marc/juul