starting user notes

List overview All Threads
Download

newer

older

Including EME Diversity Analysis...

Niels ten Oever

29 Apr 2016 29 Apr '16

5:17 a.m.

Hi all, Have been toying some time setting up BigBang now. First of all I would like to thank you people for developing this and making it FLOSS. Secondly I wanted to make a few short notes on the installation process for me, working on Debian 8.0 Jessie (Stable). Installation has been a bit of an issue because of quite a few issues with different Python versions. There were some dependencies that could not be resolved in Python 2.6 and 2.7 through the debian repos, so I went with Python 3.4, which of course resulted in issues when I ran the Python command, and not calling python3 (at several stages, most recently in the notebooks (because imports failed)). Probably a bit of a n00b thing, but just wanted to flag it. Will make more notes during installation. Hope it is useful :) Something that might be a bit more interesting is why I am actually installing this software: I am researching prevelance and penetration of rights language in Internet Governance forums, such as ICANN and the IETF, which is partially based on my involved with both bodies to push for human rights (http://icannhumanrights.net and https://hrpc.io) and my PhD at https://data-activism.net/. So expect more traffic and questions from me here soon. Cheers, Niels -- Twitter : @conflictmedia PGP fingerprint : 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9

Show replies by thread

Niels ten Oever

29 Apr 29 Apr

7:19 a.m.

New subject: question + starting user notes

A few more notes while installing and first usage (1 and 2), and then a question for where I am stuck now (3). 1. To clean things up a bit and start fresh I decided to remove my bigbang folder. After I tried to reinstall I had quite some issues with running pip install -r requirements.txt especially where it came to the packages snakefood and pydot. Which is somewhat surprising since they (1) already are installed and (2) I have installed them before (3) and many of them are availble from the Debian repos. I simply uncommented them from requirements.text and went ahead, and finally simply went ahead and ran $python setup python develop. The error messages from $sudo pip install -r requirements.txt - FYI: Collecting snakefood (from -r requirements.txt (line 19)) Using cached snakefood-1.4.tar.gz Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/pip-build-_x_eycqn/snakefood/setup.py", line 19 except IOError, e: ^ SyntaxError: invalid syntax ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-_x_eycqn/snakefood/ and Collecting pydot (from BigBang==0.1->-r requirements.txt (line 1)) Using cached pydot-1.0.2.tar.gz Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/pip-build-5bflk4zs/pydot/setup.py", line 5 except ImportError, excp: ^ SyntaxError: invalid syntax ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-5bflk4zs/pydot/ 2. I could not simply run 'source activate bigbang' as indicated in the readme.md, I first had to run $ virtualenv venv and then $ source venv/bin/activate bigbang 3. I do not get the notebooks properly running, I have tried several but I think this comes back (again) to Python versions because what I get when I simply run the first line (%matplotlib inline) in 'Analyze Senders'is: [code] ImportError Traceback (most recent call last) <ipython-input-1-e27d371d6baa> in <module>() ----> 1 get_ipython().magic('matplotlib inline') /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py in magic(self, arg_s) 2161 magic_name, _, magic_arg_s = arg_s.partition(' ') 2162 magic_name = magic_name.lstrip(prefilter.ESC_MAGIC) -> 2163 return self.run_line_magic(magic_name, magic_arg_s) 2164 2165 #------------------------------------------------------------------------- /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py in run_line_magic(self, magic_name, line) 2082 kwargs['local_ns'] = sys._getframe(stack_depth).f_locals 2083 with self.builtin_trap: -> 2084 result = fn(*args,**kwargs) 2085 return result 2086 <decorator-gen-106> in matplotlib(self, line) /usr/local/lib/python3.4/dist-packages/IPython/core/magic.py in <lambda>(f, *a, **k) 191 # but it's overkill for just that one bit of state. 192 def magic_deco(arg): --> 193 call = lambda f, *a, **k: f(*a, **k) 194 195 if callable(arg): /usr/local/lib/python3.4/dist-packages/IPython/core/magics/pylab.py in matplotlib(self, line) 98 print("Available matplotlib backends: %s" % backends_list) 99 else: --> 100 gui, backend = self.shell.enable_matplotlib(args.gui) 101 self._show_matplotlib_backend(args.gui, backend) 102 /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py in enable_matplotlib(self, gui) 2937 """ 2938 from IPython.core import pylabtools as pt -> 2939 gui, backend = pt.find_gui_and_backend(gui, self.pylab_gui_select) 2940 2941 if gui != 'inline': /usr/local/lib/python3.4/dist-packages/IPython/core/pylabtools.py in find_gui_and_backend(gui, gui_select) 256 """ 257 --> 258 import matplotlib 259 260 if gui and gui != 'auto': /usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/__init__.py in <module>() 122 from matplotlib.cbook import is_string_like, mplDeprecation, dedent, get_label 123 from matplotlib.compat import subprocess --> 124 from matplotlib.rcsetup import (defaultParams, 125 validate_backend, 126 cycler) /usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/rcsetup.py in <module>() 32 33 # Don't let the original cycler collide with our validating cycler ---> 34 from cycler import Cycler, cycler as ccycler 35 36 #interactive_bk = ['gtk', 'gtkagg', 'gtkcairo', 'qt4agg', ImportError: No module named 'cycler' Import the BigBang modules as needed. These should be in your Python environment if you've installed BigBang correctly. [/code] I got similar output with other notebooks. I think this is because python 3.4 is being called. I tried: $ alias python=/usr/local/bin/python2.7 and $ ipython notebook examples/ But that does not seem to work. Any suggestions on how I can make ipython (or the notebooks) use python2 ? Cheers, Niels On 04/29/2016 02:17 PM, Niels ten Oever wrote:

...

-- Niels ten Oever Head of Digital Article 19 www.article19.org PGP fingerprint 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9

Niels ten Oever

10:41 a.m.

New subject: question + starting user notes

Found it (after some searching), it seems the module 'cycler' is no longer standard included in matploblib, can be simply installer with: $ pip install cycler The quest continuous. Cheers, Niels On 04/29/2016 04:19 PM, Niels ten Oever wrote:

...

3. I do not get the notebooks properly running, I have tried several but I think this comes back (again) to Python versions because what I get when I simply run the first line (%matplotlib inline) in 'Analyze Senders'is: [code] ImportError Traceback (most recent call last) <ipython-input-1-e27d371d6baa> in <module>() ----> 1 get_ipython().magic('matplotlib inline') /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py in magic(self, arg_s) 2161 magic_name, _, magic_arg_s = arg_s.partition(' ') 2162 magic_name = magic_name.lstrip(prefilter.ESC_MAGIC) -> 2163 return self.run_line_magic(magic_name, magic_arg_s) 2164 2165 #------------------------------------------------------------------------- /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py in run_line_magic(self, magic_name, line) 2082 kwargs['local_ns'] = sys._getframe(stack_depth).f_locals 2083 with self.builtin_trap: -> 2084 result = fn(*args,**kwargs) 2085 return result 2086 <decorator-gen-106> in matplotlib(self, line) /usr/local/lib/python3.4/dist-packages/IPython/core/magic.py in <lambda>(f, *a, **k) 191 # but it's overkill for just that one bit of state. 192 def magic_deco(arg): --> 193 call = lambda f, *a, **k: f(*a, **k) 194 195 if callable(arg): /usr/local/lib/python3.4/dist-packages/IPython/core/magics/pylab.py in matplotlib(self, line) 98 print("Available matplotlib backends: %s" % backends_list) 99 else: --> 100 gui, backend = self.shell.enable_matplotlib(args.gui) 101 self._show_matplotlib_backend(args.gui, backend) 102 /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py in enable_matplotlib(self, gui) 2937 """ 2938 from IPython.core import pylabtools as pt -> 2939 gui, backend = pt.find_gui_and_backend(gui, self.pylab_gui_select) 2940 2941 if gui != 'inline': /usr/local/lib/python3.4/dist-packages/IPython/core/pylabtools.py in find_gui_and_backend(gui, gui_select) 256 """ 257 --> 258 import matplotlib 259 260 if gui and gui != 'auto': /usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/__init__.py in <module>() 122 from matplotlib.cbook import is_string_like, mplDeprecation, dedent, get_label 123 from matplotlib.compat import subprocess --> 124 from matplotlib.rcsetup import (defaultParams, 125 validate_backend, 126 cycler) /usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/rcsetup.py in <module>() 32 33 # Don't let the original cycler collide with our validating cycler ---> 34 from cycler import Cycler, cycler as ccycler 35 36 #interactive_bk = ['gtk', 'gtkagg', 'gtkcairo', 'qt4agg', ImportError: No module named 'cycler' Import the BigBang modules as needed. These should be in your Python environment if you've installed BigBang correctly. [/code] I got similar output with other notebooks. I think this is because python 3.4 is being called. I tried: $ alias python=/usr/local/bin/python2.7 and $ ipython notebook examples/ But that does not seem to work. Any suggestions on how I can make ipython (or the notebooks) use python2 ?

-- Niels ten Oever Head of Digital Article 19 www.article19.org PGP fingerprint 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9

Niels ten Oever

11:28 a.m.

New subject: question + starting user notes

Hi all, I was getting several syntax errors in the notebooks and I assumed this was because ipython was installed for Python 3.4. So I uninstalled ipython both with apt-get and pip and installed ipython with pip2. Now my python and ipython seem to be in sync: $ python Python 2.7.9 (default, Mar 1 2015, 12:57:24) [GCC 4.9.2] on linux2 Type "help", "copyright", "credits" or "license" for more information.

...

>> exit()

$ ipython Python 2.7.9 (default, Mar 1 2015, 12:57:24) Type "copyright", "credits" or "license" for more information. IPython 4.2.0 -- An enhanced Interactive Python. ? -> Introduction and overview of IPython's features. %quickref -> Quick reference. help -> Python's own help system. object? -> Details about 'object', use 'object??' for extra details. In [1]: exit() but now I'm unable to start the notebooks: $ ipython notebook examples/ [TerminalIPythonApp] WARNING | Subcommand `ipython notebook` is deprecated and will be removed in future versions. [TerminalIPythonApp] WARNING | You likely want to use `jupyter notebook` in the future Traceback (most recent call last): File "/usr/local/bin/ipython", line 11, in <module> sys.exit(start_ipython()) File "/usr/local/lib/python2.7/dist-packages/IPython/__init__.py", line 119, in start_ipython return launch_new_instance(argv=argv, **kwargs) File "/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line 595, in launch_instance app.initialize(argv) File "<decorator-gen-111>", line 2, in initialize File "/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line 74, in catch_config_error return method(app, *args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/IPython/terminal/ipapp.py", line 296, in initialize super(TerminalIPythonApp, self).initialize(argv) File "<decorator-gen-7>", line 2, in initialize File "/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line 74, in catch_config_error return method(app, *args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/IPython/core/application.py", line 397, in initialize self.parse_command_line(argv) File "/usr/local/lib/python2.7/dist-packages/IPython/terminal/ipapp.py", line 291, in parse_command_line return super(TerminalIPythonApp, self).parse_command_line(argv) File "<decorator-gen-4>", line 2, in parse_command_line File "/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line 74, in catch_config_error return method(app, *args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line 488, in parse_command_line return self.initialize_subcommand(subc, subargv) File "/usr/local/lib/python2.7/dist-packages/IPython/core/application.py", line 207, in initialize_subcommand return super(BaseIPythonApplication, self).initialize_subcommand(subc, argv) File "<decorator-gen-3>", line 2, in initialize_subcommand File "/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line 74, in catch_config_error return method(app, *args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line 419, in initialize_subcommand subapp = import_item(subapp) File "/usr/local/lib/python2.7/dist-packages/ipython_genutils/importstring.py", line 31, in import_item module = __import__(package, fromlist=[obj]) ImportError: No module named notebook.notebookapp Any suggestions? Best, Niels On 04/29/2016 07:41 PM, Niels ten Oever wrote:

...

-- Niels ten Oever Head of Digital Article 19 www.article19.org PGP fingerprint 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9

Niels ten Oever

1 May 1 May

7:30 a.m.

New subject: question + starting user notes

Hi all, After a lot of trying and going back and forth, reinstalling everything I needed with pip2, I found out that what the actual problem was: for 4.0 and above one needs to install the notebook app seperately by doing: $ pip install jupyter. Seem to BigBang working now in a virtual machine, so if someone is going through same issues as me am happy to share an image. Cheers, Niels On 04/29/2016 08:28 PM, Niels ten Oever wrote:

...

>> exit()

-- Niels ten Oever Head of Digital Article 19 www.article19.org PGP fingerprint 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9

Sebastian Benthall

3 May 3 May

6:12 p.m.

New subject: question + starting user notes

Did you by any chance try using the Anaconda Python distribution? I'm sorry you had such a hard time getting this installed. It's a little hard for me to diagnose the problem as you have changed the context quite a bit. But if you were using the pip installation instructions and having trouble with the build, it's probably because I should have specified starting a new virtual env with a particular Python version to begin with. Does that sound right to you? If so I'll make a ticket. Again, thanks so much for your interest in this project. I'll support your work however I'm able. best regards, Seb On Sun, May 1, 2016 at 7:30 AM, Niels ten Oever <lists(a)digitaldissidents.org

...

wrote:

...

>> exit()

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

595, in launch_instance app.initialize(argv) File "<decorator-gen-111>", line 2, in initialize File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/IPython/terminal/ipapp.py", line 296, in initialize super(TerminalIPythonApp, self).initialize(argv) File "<decorator-gen-7>", line 2, in initialize File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/IPython/core/application.py", line 397, in initialize self.parse_command_line(argv) File "/usr/local/lib/python2.7/dist-packages/IPython/terminal/ipapp.py", line 291, in parse_command_line return super(TerminalIPythonApp, self).parse_command_line(argv) File "<decorator-gen-4>", line 2, in parse_command_line File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

488, in parse_command_line return self.initialize_subcommand(subc, subargv) File "/usr/local/lib/python2.7/dist-packages/IPython/core/application.py", line 207, in initialize_subcommand return super(BaseIPythonApplication, self).initialize_subcommand(subc, argv) File "<decorator-gen-3>", line 2, in initialize_subcommand File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

419, in initialize_subcommand subapp = import_item(subapp) File

"/usr/local/lib/python2.7/dist-packages/ipython_genutils/importstring.py",

line 31, in import_item module = __import__(package, fromlist=[obj]) ImportError: No module named notebook.notebookapp Any suggestions? Best, Niels On 04/29/2016 07:41 PM, Niels ten Oever wrote: > Found it (after some searching), it seems the module 'cycler' is no > longer standard included in matploblib, can be simply installer with: > > $ pip install cycler > > The quest continuous. > > Cheers, > > Niels > > On 04/29/2016 04:19 PM, Niels ten Oever wrote: >> 3. >> >> I do not get the notebooks properly running, I have tried several but I >> think this comes back (again) to Python versions because what I get

when

>> I simply run the first line (%matplotlib inline) in 'Analyze

Senders'is:

>> >> [code] >> >> ImportError Traceback (most recent call

last)

>> <ipython-input-1-e27d371d6baa> in <module>() >> ----> 1 get_ipython().magic('matplotlib inline') >> >> /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py >> in magic(self, arg_s) >> 2161 magic_name, _, magic_arg_s = arg_s.partition(' ') >> 2162 magic_name = magic_name.lstrip(prefilter.ESC_MAGIC) >> -> 2163 return self.run_line_magic(magic_name, magic_arg_s) >> 2164 >> 2165 >>

#-------------------------------------------------------------------------

>> >> /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py >> in run_line_magic(self, magic_name, line) >> 2082 kwargs['local_ns'] = >> sys._getframe(stack_depth).f_locals >> 2083 with self.builtin_trap: >> -> 2084 result = fn(*args,**kwargs) >> 2085 return result >> 2086 >> >> <decorator-gen-106> in matplotlib(self, line) >> >> /usr/local/lib/python3.4/dist-packages/IPython/core/magic.py in >> <lambda>(f, *a, **k) >> 191 # but it's overkill for just that one bit of state. >> 192 def magic_deco(arg): >> --> 193 call = lambda f, *a, **k: f(*a, **k) >> 194 >> 195 if callable(arg): >> >> /usr/local/lib/python3.4/dist-packages/IPython/core/magics/pylab.py in >> matplotlib(self, line) >> 98 print("Available matplotlib backends: %s" % >> backends_list) >> 99 else: >> --> 100 gui, backend =

self.shell.enable_matplotlib(args.gui)

>> 101 self._show_matplotlib_backend(args.gui, backend) >> 102 >> >> /usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py >> in enable_matplotlib(self, gui) >> 2937 """ >> 2938 from IPython.core import pylabtools as pt >> -> 2939 gui, backend = pt.find_gui_and_backend(gui, >> self.pylab_gui_select) >> 2940 >> 2941 if gui != 'inline': >> >> /usr/local/lib/python3.4/dist-packages/IPython/core/pylabtools.py in >> find_gui_and_backend(gui, gui_select) >> 256 """ >> 257 >> --> 258 import matplotlib >> 259 >> 260 if gui and gui != 'auto': >> >>

/usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/__init__.py

>> in <module>() >> 122 from matplotlib.cbook import is_string_like, mplDeprecation, >> dedent, get_label >> 123 from matplotlib.compat import subprocess >> --> 124 from matplotlib.rcsetup import (defaultParams, >> 125 validate_backend, >> 126 cycler) >> >>

/usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/rcsetup.py

>> in <module>() >> 32 >> 33 # Don't let the original cycler collide with our validating

cycler

---> 34 from cycler import Cycler, cycler as ccycler 35 36 #interactive_bk = ['gtk', 'gtkagg', 'gtkcairo', 'qt4agg', ImportError: No module named 'cycler' Import the BigBang modules as needed. These should be in your Python environment if you've installed BigBang correctly. [/code] I got similar output with other notebooks. I think this is because python 3.4 is being called. I tried: $ alias python=/usr/local/bin/python2.7 and $ ipython notebook examples/ But that does not seem to work. Any suggestions on how I can make ipython (or the notebooks) use python2 ?

-- Niels ten Oever Head of Digital Article 19 www.article19.org PGP fingerprint 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9 _______________________________________________ BigBang-user mailing list BigBang-user(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/bigbang-user

Niels ten Oever

4 May 4 May

1:28 a.m.

New subject: question + starting user notes

Hi Sebastian, On 05/04/2016 03:12 AM, Sebastian Benthall wrote:

...

Did you by any chance try using the Anaconda Python distribution?

I got things working now, so no worries. I went for the pip installation.

...

I'm sorry you had such a hard time getting this installed.

No problem, we're not called hackademia for nothing ;)

...

It's a little hard for me to diagnose the problem as you have changed the context quite a bit. But if you were using the pip installation instructions and having trouble with the build, it's probably because I should have specified starting a new virtual env with a particular Python version to begin with.

Luckily now I have been able to reproduce the installation with other members of my research team, so that's good :) Eventhough there are still quite a lot of issues with most of the notebooks. You're right about virtualenv, that is the way to go, eventhough there are quite some cross dependencies that I did not completely managed to fix with virtualenv, but that might also be me. I got now everything working in a virtual machine, so all good.

...

Does that sound right to you? If so I'll make a ticket.

Will continue to play with it (now I got basic functionality working) and get more acquainted with notebooks in general.

...

Again, thanks so much for your interest in this project. I'll support your work however I'm able.

Great. Any chance we could perhaps do a 15 minute call where I can ask you some rapid fire questions?

...

best regards, Seb

Thanks! Niels

...

On Sun, May 1, 2016 at 7:30 AM, Niels ten Oever <lists(a)digitaldissidents.org <mailto:lists@digitaldissidents.org>> wrote: Hi all, After a lot of trying and going back and forth, reinstalling everything I needed with pip2, I found out that what the actual problem was: for 4.0 and above one needs to install the notebook app seperately by doing: $ pip install jupyter. Seem to BigBang working now in a virtual machine, so if someone is going through same issues as me am happy to share an image. Cheers, Niels On 04/29/2016 08:28 PM, Niels ten Oever wrote:

Hi all, I was getting several syntax errors in the notebooks and I assumed

this

was because ipython was installed for Python 3.4. So I uninstalled ipython both with apt-get and pip and installed ipython with pip2. Now my python and ipython seem to be in sync: $ python Python 2.7.9 (default, Mar 1 2015, 12:57:24) [GCC 4.9.2] on linux2 Type "help", "copyright", "credits" or "license" for more information.

>> exit()

notebook`

in the future Traceback (most recent call last): File "/usr/local/bin/ipython", line 11, in <module> sys.exit(start_ipython()) File "/usr/local/lib/python2.7/dist-packages/IPython/__init__.py", line 119, in start_ipython return launch_new_instance(argv=argv, **kwargs) File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

595, in launch_instance app.initialize(argv) File "<decorator-gen-111>", line 2, in initialize File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File

"/usr/local/lib/python2.7/dist-packages/IPython/terminal/ipapp.py", line

296, in initialize super(TerminalIPythonApp, self).initialize(argv) File "<decorator-gen-7>", line 2, in initialize File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/IPython/core/application.py", line 397, in initialize self.parse_command_line(argv) File

"/usr/local/lib/python2.7/dist-packages/IPython/terminal/ipapp.py", line

291, in parse_command_line return super(TerminalIPythonApp, self).parse_command_line(argv) File "<decorator-gen-4>", line 2, in parse_command_line File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

74, in catch_config_error return method(app, *args, **kwargs) File

"/usr/local/lib/python2.7/dist-packages/traitlets/config/application.py", line

419, in initialize_subcommand subapp = import_item(subapp) File

"/usr/local/lib/python2.7/dist-packages/ipython_genutils/importstring.py",

several but I

>> think this comes back (again) to Python versions because what I

get when

>> I simply run the first line (%matplotlib inline) in 'Analyze

Senders'is:

>> >> [code] >> >> ImportError Traceback (most recent

call last)

>> <ipython-input-1-e27d371d6baa> in <module>() >> ----> 1 get_ipython().magic('matplotlib inline') >> >>

/usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py

>> in magic(self, arg_s) >> 2161 magic_name, _, magic_arg_s = arg_s.partition(' ') >> 2162 magic_name = magic_name.lstrip(prefilter.ESC_MAGIC) >> -> 2163 return self.run_line_magic(magic_name, magic_arg_s) >> 2164 >> 2165 >>

#-------------------------------------------------------------------------

>> >>

/usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py >>> in run_line_magic(self, magic_name, line) >>> 2082 kwargs['local_ns'] = >>> sys._getframe(stack_depth).f_locals >>> 2083 with self.builtin_trap: >>> -> 2084 result = fn(*args,**kwargs) >>> 2085 return result >>> 2086 >>> >>> <decorator-gen-106> in matplotlib(self, line) >>> >>> /usr/local/lib/python3.4/dist-packages/IPython/core/magic.py in >>> <lambda>(f, *a, **k) >>> 191 # but it's overkill for just that one bit of state. >>> 192 def magic_deco(arg): >>> --> 193 call = lambda f, *a, **k: f(*a, **k) >>> 194 >>> 195 if callable(arg):

>> >>

/usr/local/lib/python3.4/dist-packages/IPython/core/magics/pylab.py in

>> matplotlib(self, line) >> 98 print("Available matplotlib backends: %s" % >> backends_list) >> 99 else: >> --> 100 gui, backend =

self.shell.enable_matplotlib(args.gui) >>> 101 self._show_matplotlib_backend(args.gui, backend) >>> 102

>> >>

/usr/local/lib/python3.4/dist-packages/IPython/core/interactiveshell.py >>> in enable_matplotlib(self, gui) >>> 2937 """ >>> 2938 from IPython.core import pylabtools as pt >>> -> 2939 gui, backend = pt.find_gui_and_backend(gui, >>> self.pylab_gui_select) >>> 2940 >>> 2941 if gui != 'inline': >>> >>> /usr/local/lib/python3.4/dist-packages/IPython/core/pylabtools.py in >>> find_gui_and_backend(gui, gui_select) >>> 256 """ >>> 257 >>> --> 258 import matplotlib >>> 259 >>> 260 if gui and gui != 'auto':

>> >>

/usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/__init__.py >>> in <module>() >>> 122 from matplotlib.cbook import is_string_like, mplDeprecation, >>> dedent, get_label >>> 123 from matplotlib.compat import subprocess >>> --> 124 from matplotlib.rcsetup import (defaultParams, >>> 125 validate_backend, >>> 126 cycler)

>> >>

/usr/local/lib/python3.4/dist-packages/matplotlib-1.5.1-py3.4-linux-x86_64.egg/matplotlib/rcsetup.py

>> in <module>() >> 32 >> 33 # Don't let the original cycler collide with our

validating cycler

-- Niels ten Oever Head of Digital Article 19 www.article19.org <http://www.article19.org> PGP fingerprint 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9 _______________________________________________ BigBang-user mailing list BigBang-user(a)lists.sudoroom.org <mailto:BigBang-user@lists.sudoroom.org> https://sudoroom.org/lists/listinfo/bigbang-user

-- Niels ten Oever Head of Digital Article 19 www.article19.org PGP fingerprint 8D9F C567 BEE4 A431 56C4 678B 08B5 A0F2 636D 68E9

2925

days inactive

2930

days old

bigbang-user@sudoroom.org

Manage subscription

6 comments

2 participants

tags (0)

participants (2)

Niels ten Oever
Sebastian Benthall