Hi,
I'm writing from Sudo Room in the Omni Commons (4799 Shattuck, account
#10261). We've been using a static ipv4 address (142.254.26.9) to
serve our large building for many years, and we'd like to start
supporting ipv6 as well, but we're not sure what prefix we've been
assigned, if any. Our router is only advertising link-local, as you
can see here:
$ ip address show dev enp3s0
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 00:25:90:03:1f:66 brd ff:ff:ff:ff:ff:ff
inet 142.254.26.9/24 brd 142.254.26.255 scope global enp3s0
valid_lft forever preferred_lft forever
inet6 fe80::225:90ff:fe03:1f66/64 scope link
valid_lft forever preferred_lft forever
$ ip -6 neigh show
fe80::223:6aff:febe:5932 dev enp3s0 lladdr 00:23:6a:be:59:32 router STALE
$ rdisc6 -m enp3s0
Soliciting ff02::2 (ff02::2) on enp3s0...
Hop limit : 64 ( 0x40)
Stateful address conf. : No
Stateful other conf. : Yes
Mobile home agent : No
Router preference : low
Neighbor discovery proxy : No
Router lifetime : 0 (0x00000000) seconds
Reachable time : unspecified (0x00000000)
Retransmit time : unspecified (0x00000000)
Source link-layer address: 00:23:6A:BE:59:32
from fe80::223:6aff:febe:5932
--
Can you help us get set up?
Thanks,
Yar
Omni Commons