8 Oct
2014
8 Oct
'14
11:24 p.m.
okay, i did the thing and made the list of parameters, WITH VALUES:
https://github.com/jerkey/yasnac/blob/master/dat/params-edited.txt
this is a list of parameter descriptions with their corresponding values,
ripped from PARAM.DAT
have fun making those 3d models
-jake
On Wed, 8 Oct 2014, Jake wrote:
So the robot's control box has a bunch of
constants relating to its geometry,
which are important for modeling it, so that we can tell it where to go.
These constants are stored in parameter arrays in the robot's memory,
preloaded from ROM when we initialized it.
Descriptions of the parameter values were found in a cave, in a file called
ERCPRM.HLP, scrawled in an ancient dead language, but a translator was found
and exported its contents to http://spaz.org/~jake/robot/ERCPRM.RTF
I have edited ERCPRM.rtf down to the following text file:
http://spaz.org/~jake/robot/params-important.txt
if someone can make a program that adds the actual value of each parameter to
this file, it will probably make things easier for whoever wants to make a
model of the robot.
the parameter data are here:
https://github.com/jerkey/yasnac/blob/master/dat/PARAM.DAT
PARAM.DAT is a file starting with /PRM
then each parameter array starts with // and then the name of the array and
then PRM, all in one line, for example //RCPRM for the RC array.
Then the parameters are listed, ten per line, as a comma-delimited list.
putting these values after their corresponding line in params-important.txt
would be totally awesome.
-jake