The vending machine now provides some more feedback after money is put in.
Source code associated with my contribution is here. I haven't documented
the other components of the vending machine.
Based on the implementation details, it appears to me that
the bill acceptor is in fact plugged into one board (Arduino Leonardo)
that is connected by serial to another board (Raspberry Pi). Why is
the former board used at all? That is, why is the bill acceptor not
plugged directly into the latter board?
I said "your 'community' space," but honestly, I still want this to be my
space, too. I hardly ever make a fuss about any of this stuff because it's
all so futile, you know? but in this case, I really want to make my point
clear: I think we should rescind our action against Rannette. I think
she's been treated unfairly. Even if she is "aggressive" towards you or
your compatriots, I don't think we need white dudes policing our space of
black women's bodies. Matt, you claim to have acted in another's interest
and you offer an injured third party -- let them speak for themselves,
because I don't think it's your place right now. If there was a violent
incident that threatened our space, let's hear it from a witness or an
involved party. "Something Happened" is not good enough. Otherwise "but
above all the Omni
Commons must maintain a safe, welcoming environment" seems to fly directly
in the face of the lived experience of too many black people.
I wanted to reach out for some feedback. Seeking folks who would want to
facilitate or participate in a men's group.
I've previously participated in small groups like this and found them
beneficial for various reasons. I would like to see if folks have had
similar or different experiences.
The way I'm thinking about this would culminate in something like a regular
meeting for men in the sudo room community to discuss relevant issues
including those of identity, oppression, privilege, patriarchy, gender,
sexuality, stereotypes, safe space, and mutual support.
This may not be the best or even a viable path to approach these topics,
but I wanted to throw it out there to see if there is any interest.
Here's some images of the Seiko SMI 3200 Scanning Electron Microscope that
is in need of a new home:
Note that this is NOT a small system! It's not huge as SEM's go, but
definitely not desktop - more like "small room sized". And it would
obviously need some dedicated person to keep it in good running condition.
It is however almost brand new, and currently *running*, at <5nm resolution!
Beam Services Inc is down in Pleasanton, so I guess interested parties
could potentially go and have a look at the system. This kind of equipment
would be a significant commitment and investment in time and effort on our
part, so let's coordinate on this shall we?
On Wed, Jul 1, 2015 at 11:14 AM, Nathan McCorkle <nmz787(a)gmail.com> wrote:
> Useful for micro and nano imaging, as well as micro and nano milling
> and deposition (if it has a gas injector system).
> ---------- Forwarded message ----------
> From: <microscopylistserver-noreply(a)microscopy.com>
> Date: Wed, Jun 24, 2015 at 4:49 PM
> Subject: [Microscopy] viaWWW:SMI3200 FIB system looking for a good home
> To: nmz787(a)gmail.com
> The Microscopy ListServer -- CoSponsor: The Microscopy Society of America
> To Subscribe/Unsubscribe --
> On-Line Help http://www.microscopy.com/MicroscopyListserver/FAQ.html
> X-from: dan.buntman(a)beamservices.com
> This Question/Comment was submitted to the Microscopy Listserver
> using the WWW based Form at
> Remember this posting is most likely not from a Subscriber, so when
> please copy both dan.buntman(a)beamservices.com as well as the
> Microscopy Listserver
> Email: dan.buntman(a)beamservices.com
> Name: Dan Buntman
> Organization: Beam Services, Inc.
> Title-Subject: [Filtered] SMI3200 FIB system looking for a good home
> Message: We have a Seiko SMI3200 FIB single beam system available for
> donation to any university or
> other non-profit organization. The system has only been used
> ~3,500hrs., is fully functional and
> currently operating in our facility with demonstrated resolution of
> <5nm. The recipient will be
> responsible for crating, shipping and installation costs. If you are
> interested please contact me
> at dan.buntman(a)beamservices.com.
> Login Host: 184.108.40.206
> Listserver Email Form V - 20120416
> Do not reply to this message it is from
> the Microscopy Listserver NO-REPLY forwarding
> system. You should send a new message to
> 11, 17 -- From microscopylistserver-noreply(a)microscopy.com Wed Jun 24
> 18:03:49 2015
> 11, 17 -- Received: from Nestor-Mac-Pro-ZNL.local (mac22.zaluzec.com
> 11, 17 -- by ns.microscopy.com (220.127.116.1160308/8.12.8) with
> ESMTP id t5ON3mfZ000739
> 11, 17 -- for <microscopy(a)microscopy.com>; Wed, 24 Jun 2015
> 18:03:48 -0500
> 11, 17 -- Message-ID: <558B3754.8090000(a)microscopy.com>
> 11, 17 -- Date: Wed, 24 Jun 2015 18:03:48 -0500
> 11, 17 -- From: MicroscopyListserver-NoReply
> 11, 17 -- Reply-To: microscopylistserver-noreply(a)microscopy.com
> 11, 17 -- User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9;
> rv:31.0) Gecko/20100101 Thunderbird/31.7.0
> 11, 17 -- MIME-Version: 1.0
> 11, 17 -- To: MicroscopyListServer-Forward <microscopy(a)microscopy.com>
> 11, 17 -- Subject: viaWWW:SMI3200 FIB system looking for a good home
> 11, 17 -- References: <201506241723.t5OHNnE8030468(a)ns.microscopy.com>
> 11, 17 -- In-Reply-To: <201506241723.t5OHNnE8030468(a)ns.microscopy.com>
> 11, 17 -- X-Forwarded-Message-Id:
> 11, 17 -- Content-Type: text/plain; charset=windows-1252; format=flowed
> 11, 17 -- Content-Transfer-Encoding: 7bit
> ==============================End of -
> You received this message because you are subscribed to the Google Groups
> "Counter Culture Labs" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to counterculturelabs+unsubscribe(a)googlegroups.com.
> To post to this group, send email to counterculturelabs(a)googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
Nope, just finding a good adhesive for reattaching it is hard. I ended up
just using an open cell foam pad to push the header on the glass
Only advice is to not be too aggressive and let the glue take its time to
release. Doingbot while warm would help.
On Mar 21, 2018 1:34 PM, "Marc Juul" <marc(a)juul.io> wrote:
Cool! Hey is there any reason why I can't do that end then just flip the
glass, clean it and re-attach the heating pad on the bottom?
Any tips on getting the heating pad off?
On Wed, Mar 21, 2018 at 11:34 AM, Adam <me(a)adammunich.com> wrote:
> I have successfully separated the heating pad from my old Taz bed it's
> quite robust
> On Mar 21, 2018 8:10 AM, "Marc Juul" <marc(a)juul.io> wrote:
>> On Wed, Mar 14, 2018 at 3:51 PM, Jake <jake(a)spaz.org> wrote:
>>> I 3d printed stuff last night and it worked great. I scraped off the
>>> stuff on
>>> the print bed and exposed the actual glass print bed! it's still good
>>> there are a couple of serious craters. Not sure what to do about the
>>> perhaps fill them in with caulk? Silicone caulk sticks to glass.
>> Yeah sorry about that. One of the craters is my fault. I was printing on
>> a really cold night with ABS and the ABS stuck so well to the glass and the
>> temperature difference in the room was so great that the ABS contracting as
>> it cooled actually took off a bit of the glass. I will try to find and
>> order replacement glass.
>> sudo-discuss mailing list
The fire inspection was originally planned for Thursday 4/25. It has been rescheduled for Tuesday 4/23 (two days earlier). Monday will be the last day before the inspection.
If anyone needs help moving anything, I have my truck and I plan on being at Omni all day Today.
From: sudo-discuss <sudo-discuss-bounces(a)lists.sudoroom.org> on behalf of Laura Turiano <scylla(a)riseup.net>
Date: Thursday, April 11, 2019 at 4:46 PM
To: "discuss(a)lists.omnicommons.org" <discuss(a)lists.omnicommons.org>, Sudo room <sudo-discuss(a)lists.sudoroom.org>, Counter Culture Labs Members <cclmembers(a)googlegroups.com>, anita de asis <maowunyo(a)gmail.com>, Asia || Phat Beets Produce <asia(a)phatbeetsproduce.org>, Liberated Lens <Liberated_Lens(a)lists.riseup.net>
Subject: [sudo-discuss] IMPORTANT: Annual fire inspection 4/25/19
Omni Commons' Annual Fire Inspection for this year is scheduled for Thursday, April 25th at 3pm. The Assistant Fire Chief will be training a new inspector - this gives even more reason to make sure we are up to Fire Code Standards before they arrive. Please take some time between now and then to clean and prepare before then. We should also schedule a work party on Monday, Tuesday or Wednesday that week to get everything cleared and ready.
* All rooms must be unlocked or unlockable. Do we have a key to the CCL closets on the master keyring?
* Ballroom must be cleared of tables and chairs, mezzanine of stray books
* Extension cords disconnected and pathways clear
* All hallways cleared of stuff and at least 3' clearance in front of any electrical panels
* Any piles of stuff should be removed and cluttered areas organized, especially if flammable
* All storage areas cleaned up a bit and flammable materials put away (mesh in sudo; phat beets, Village, CCL in basement)
* Any easily flammable furniture that has appeared in the basement (couches in particular) needs to be removed. Couches are something the fire department told us to move out of the basement during our very first inspection
* It would be great to finally finish the door into the bocce court
I will be able to be at the building that day to go on the walkthrough but anyone else can join.
_______________________________________________ sudo-discuss mailing list sudo-discuss(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/sudo-discuss
---------- Forwarded message ---------
From: Yardena Cohen <yardenack(a)gmail.com>
Date: Tue, Apr 30, 2019 at 10:40 AM
Subject: PROPOSAL: condemn harassment
A few Omni members, including Julio and Lynn, have been targeted over
the past few months by anonymous online harassers who are subscribing
them to nazi and marxist mailing lists. It appears to be in response
to their emails to the consensus list, indicating that the harasser is
reading our consensus list. There is even some suspicion that this
person is an Omni member.
It's probably the same person or group who trolled our meeting notes
in February: https://omnicommons.org/pipermail/consensus/2019-February/001557.html
If anybody knows anything about this, please come forward with
information. In the meantime, I think it'd be best if the Omni
community could at least come to a consensus about condemning this
harassment. Even if it seems symbolic at best, it would be a step
towards healing and would send a clear signal to the harassers that
they will not succeed in dividing us.
Can we consent on this by Thursday? Thanks.
FYI, there are tons of flies, I’ve killed about 50, there were a bunch in the hall bathroom and under the blue table at the back west wall, and they are still coming. Does anyone have any extra fly swatters that they could bring? or more of those electric ones?
Hi, I haven't been to the space yet but I thought Software Hack Night would
be a good opportunity to visit. So I was wondering if anyone was planning
on going this week? But more importantly, what day is the event?
It says 4/25, but I noticed it's actually scheduled for midnight. Is it
actually planned for Wed night / Thurs morning? Is it kinda for people who
hang around after the Wednesday party?
Does anyone know where (locally) could I buy four Raspberry Pi 3 Model B+
with aluminum or transparente plastic case, heat sink, fan, and DC Power
I would like to buy them tomorrow or Thursday the latest, if possible.