Re: [sudo-discuss] daisy-chaining power supplies in the space

Hi Steve, That's a good point, but I don't know if we can afford anything like that. We could use temporary and easy solutions like extension cords that get unplugged after use. If someone could help us out professionally, it would be a good all around kind of thing. In the meantime, I think it would be smart if we dealt with the following: 1. Make-shift cables and stuff hanging around the space with exposed caps(Copper-oxide, dust, moisture and things like beading can cause a fault-arc on our , untreated, *wood floor* or other fuel). 2. Ground everything out. Not only will we get 'dirty' signal, without grounding we will have an increased risk of fire for a couple of reasons(i think arcing is #1). 3. Separate food, water, chemicals and other products from electronics. 4. Only use extension cords temporarily. 5. Read the ratings on our power-strips to see if they can handle the load we are using. 6. Avoid plugging high-drain devices into power-strips that don't meet the recommended load. Secondary considerations for changing our behavior include: 1. Tripping over wires, which can hurt humans and gear 2. Potential for electrocution 3. Aesthetically unpleasing 4. Gets in the way of work I'm willing to donate $100 extra to the space for a proper power-conditioner, and to help ground things out, but these are the things I could think of that would imply liability on our part as a group. *These are just suggestions, but I think they are good ones. * * * -Rusty On Tue, Feb 5, 2013 at 10:01 PM, Steve Berl <steveberl(a)gmail.com> wrote: -- Cheers, Rusty Lindgren **