I can't commit to the entire project but I do need to work on networking skills and
would be interested in flashing a router. What sort of machine would we want to use?
-------- Original Message --------
On Aug 25, 2023, 4:00 PM, Laura Wesely via sudo-discuss wrote:
Thanks for including me in this!
I am very eager to support by lending what I can: some time, brute force, impeccable
instruction-following, and strong executive functioning and spacial reasoning skills.
Beyond that I lack technological knowledge and experience to be of much help.
I short: tell me what to do and put me to work.
XO
Lo
On Fri, Aug 25, 2023, 15:08 Jake <jake(a)spaz.org> wrote:
> Hi everyone,
>
> Omni Commons needs some rooms locked up with electronic locks. I volunteered
> us to make everything and all the software. We can ask for some rent relief
> or other favors in exchange for making this stuff, because otherwise they were
> going to spend money that we don't have, to buy stuff that wouldn't work.
>
> Who wants to help with this stuff???
>
> We have a bin of keypads and another bin of solenoids and another bin of servo
> motors, and plenty of arduinos. The plan is to build a couple of these things
> and tune up the software and get them going, and install them on the rooms.
>
> I'm thinking an N600 wifi router flashed with openWRT and python, with an
> Arduino plugged into it over USB. The Arduino connects to the numeric keypad
> and solenoid latch, and a beeper. The software on the arduino can be
> basically this:
>
https://github.com/jerkey/doorkeypad/tree/twocol-eeprom
>
> and then the N600 linux machine can host stuff like what i made recently for
> the omni front door magstripe reader (ask me about it) so that people from the
> events group who are not technical can add and remove codes from the systems.
>
> here is what Phillip from the events group has put together to describe what
> they want the system to do:
>
> Feature List:
>
> ● Remote access by Omni events staff to unlock or see if the door is currently
> closed/locked
>
> ● Ability for Omni events staff to admin the system for these doors
>
> ● Numpad next to door for renters to quickly unlock with 4 digit pins
>
> ● Timeline recorded of each door access for lookup later by Omni event staff
>
> ● (optional) log of when door is closed
>
> Feature Expectations:
>
> ● Omni events staff admin abilities
>
> ○ Delegate additional admins
>
> ○ Add/remove renters with a pin access
>
> ○ Set dates when renter pin starts and stops working
>
> Planned Doors:
>
> ● DJ booth above bar with sound system control
>
> ● Tech room side of stage where sound equipment is stored