sudo-discuss

sudo-discuss@sudoroom.org

14 participants
7489 discussions

Photos of low cost tiny house on foundation - completed Autumn 2019 to house homeless couple in Marin

by Autonomous

Cost to build this tiny house was $3500 for materials, labor was donated by my non-profit. This tiny house follows the guidelines of AB 2176 for "housing crisis emergency shelter". Having 120 square feet and being no taller than 15 ft above ground level, no permits are required. As part of a workaround for dealing with occupancy issues, zoning laws and unpleasant nimby neighbors in Marin County, it is located on a "sanctuary site" - where federal religious land use laws apply under RLUIPA. This tiny house provides shelter for a young couple who grew up in Marin, obtained college degrees and are both employed in Marin. After a series of rent increases on a small room they were renting which was substandard, they could not find any other affordable options in Marin and started living out of a car. The plans are open source - I am working on completing a sketchup model before the plans go up on github. Since my non-profit wishes to construct more of these shelters in Marin and other locations in California, I am working on the next version of the design which incorporates elements from wikihouse and will utilize a cnc router for construction. [image: 20191125_140649.jpg] Low cost tiny house on foundation, 120 sqft with loft. <https://photos.app.goo.gl/3RrY5z8Xcd6iBhEd7>

6 years, 4 months

Free Tube Amplifiers

by Kyle Mitchell

I've finally come around to realizing that I'm just not going to finish a couple electronics projects I set aside a few years back. If anyone is interested in post-war tube audio, I have, free to a good home: - Dynaco PAS-2 preamplifier - Dynaco Stereo 70 power amplifier All the bits are there, including tube complements, and I've had both working quite well in the past. The selenium rectifiers have been replaced, but I started, but did not finish, replacing the power supplies and can capacitors with modern components. They'll need that work finished before they can play music. I should mention that the power amplifier is heavy. If you're interested, you'll probably want to put them in a vehicle: car, truck, bicycle trailer, &c. I should also mention that while these could be great first projects in tube audio, anyone working on these kinds of circuits should be mindful of electrical safety. Voltages are high, and power supply capacitors can store dangerous amounts of energy. I have a homemade capacitor discharge tool if you want it. Relatedly, I also have a TubeDebot 6L6 kit amplifier in good working order, also free to a good home. I'm not sure if the model is exactly the same, but here's the manufacturer's current page: https://tubedepot.com/products/model-16ls-stereo-integrated-tube-amplifier It's a neat little amp, quite powerful, takes line-level input, and has a built-in volume knob, so you can use it for phones or computers or MP3 players without preamplification. I was gifted a smaller TubeDepot ready-made amp some time after buying the kit, which is why the kit amp sits quiet. Special thanks to Jake for encouraging me to mention on this list. I'm not currently subscribed to sudo-discuss, so please make sure to copy me.

6 years, 4 months

Invoice 1956 from Omni Commons

by Omni Commons

Dear Sudo Room, Here's your invoice! We appreciate your prompt payment. Thank you for stewarding the commons. Love and solidarity, Omni Commons ------------------------ Pledge Summary -------------------------- Invoice # : 1956 Invoice Date: 12/01/2019 Due Date: 12/25/2019 Terms: Net 25 Amount Due: $2,000.00 The complete version has been provided as an attachment to this email. ---------------------------------------------------------------------

6 years, 5 months

3D printer repair

by Koz

Hi all, Just came by Sudo Room tonight, and I met a guy named Zirk there (pretty sure I'm not spelling his name right, but that's how it sounded). He knew his way around, and told to email you all. I'm just looking for someone who knows how to repair 3D printers, specifically the SLA kind. Can anyone help, or can point me to someone who can? Best, Koz

6 years, 5 months

A delivery Van for Phat Beets Produce

by Jenny Ryan

Please contribute a few dollars if you can and share with your local networks <3 --- *Beloved Community,* *We need your help to continue our good work* of connecting small farmers of color to communities across the East Bay. Our 2 delivery vehicles have been pushed beyond their lifespan and *are no longer running. *We are asking our community to help us secure the down payment on the purchase a lightly used delivery van. *What we use our van for:* On a weekly basis Phat Beets Produce Van is needed : -To Deliver 100's of boxes of local produce across the East Bay via Beet Box CSA <https://www.phatbeetsproduce.org/> -To Deliver 1000's of pounds of free fruits* and veggies to 5 different medical clinics, numerous community partners and community centers, provide boxes free of charge to 25 high school classrooms, numerous encampments, and to an Oakland Public Library. -Free home delivery to customers on EBT -To Support our youth program and urban farm/edible parks -To Support community events with Self Help Hunger Program and North Oakland Restorative Justice Council *Free Fruit is donated weekly by Fruit Guys. Veggies are grown at our urban ag parcels and purchased from our network of small farmers of color. Additional veggies for free distribution are provided as well by Food Not Bombs *Help us to continue to do this important work as we work to raise $5,000 to serve as a down payment for a lightly used delivery van*. Our earned income from our various RESTORATIVE ECONOMICS programs will cover our monthly payments after we secure the down payment. *Donate on GoFundMe Here <https://www.gofundme.com/f/new-delivery-van-for-phat-beets-produce>* *Donate on FaceBook Here <https://www.facebook.com/donate/796034607484126/>* *Email mylan(a)phatbeetsproduce.org <mylan(a)phatbeetsproduce.org> for cash, check, or vehicle donation* Mylan Gerbeyesus She/Her/Hers Program Director Phat Beets Produce (510) 775-2182 ...connecting small farmers of color to urban communities *Support Prescription Veggies! Order a Beet Box CSA today! <http://www.phatbeetsproduce.org/order-a-beet-box-csa/>* 11AM-5PM, Tuesday - Saturday _______________________________________________ discuss mailing list discuss(a)lists.omnicommons.org https://omnicommons.org/lists/listinfo/discuss

6 years, 5 months

Fwd: [Distutils] Apply by Nov 22 for paid contract on pip

by Jenny Ryan

two sweet gigs seeking experienced python devs to help improve pip! ---------- Forwarded message --------- From: Sumana Harihareswara <sh(a)changeset.nyc> Date: Mon, Nov 11, 2019, 11:30 Subject: [Distutils] Apply by Nov 22 for paid contract on pip To: DistUtils mailing list <distutils-sig(a)python.org>, pypa-dev < pypa-dev(a)googlegroups.com> Freelancers and other programming consultants: Get paid to improve pip. Specifically, to help finish the dependency resolver overhaul. https://pyfound.blogspot.com/2019/11/seeking-developers-for-paid-contract.h… Role 1: We seek a senior Python developer, work starting in mid-December 2019 or early January 2020, work ending at the end of May 2020. Pay: USD$116,375 total (665 hours of work at $175 per hour). Detailed task list and timeline: https://github.com/python/request-for/blob/master/2020-pip/RFP.md#role-1-se… Role 2: We seek an intermediate-to-senior Python developer, work starting in early January 2020, till the end of December 2020. Pay: USD$103,700 (670 hours of work at $150 per hour), plus $1600 budgeted for onboarding travel and $1600 budgeted for PyCon travel. Details: https://github.com/python/request-for/blob/master/2020-pip/RFP.md#role-2-in… Full request for proposals: https://github.com/python/request-for/blob/master/2020-pip/RFP.md Please apply by November 22nd, or please spread the word. Here's the giant list of reasons why this project is important: https://wiki.python.org/psf/Fundable%20Packaging%20Improvements#Finish_depe… -- Sumana Harihareswara contract project manager for PSF Changeset Consulting https://changeset.nyc -- Distutils-SIG mailing list -- distutils-sig(a)python.org To unsubscribe send an email to distutils-sig-leave(a)python.org https://mail.python.org/mailman3/lists/distutils-sig.python.org/ Message archived at https://mail.python.org/archives/list/distutils-sig@python.org/message/JU2A…

6 years, 5 months

Re: [sudo-discuss] E-waste Program reminder & request

by sierk.beij＠gmail.com

I expect to have time for that after the weekend. ----- Reply message ----- From: "Jenny Ryan" <jenny(a)jennyryan.net> To: "sudo-discuss" <sudo-discuss(a)lists.sudoroom.org> Subject: [sudo-discuss] E-waste Program reminder & request Date: Sat, Nov 2, 2019 10:24 PM If anyone could please help with this task, it's a relatively simple one: Omni's recycling service provider is CiviCorps, an awesome local org. They provide FREE ewaste pickup, but the service has to be requested and things to be picked up itemized. The online form is here: http://www.civicorpsrecycling.org/ewaste/ Is anyone able to help take this on sometime in the next few weeks? Please include the large TV located on the Entrance Hall stage. <3 Jenny

6 years, 5 months

asked Gwen to leave

by Dante Cassius

Hi everyone, I know we discussed at the last meeting Gwen slamming the door in someone's face when she asked to use the bathroom. There was another incident that went down the exact same way a few days ago, and tonight there was another that prompted me to ask Gwen to leave. I was sitting in the small classroom and heard Gwen answer the door, and shouted "it's 50,000 a month, are you going to help pay for this place, huh, are you" in a very aggressive tone, but she allowed the person in to use the bathroom. As the person was leaving, Gwen shouted "YOU'RE WELCOME" repeatedly in an extremely snotty tone. I heard this myself, confirmed I'd heard correctly with the woman who used the bathroom, and then asked Gwen to leave. To her credit, she simply said "no problem" and left immediately. This is a completely unacceptable way to answer the door at Omni. I'm not sure if Gwen if a sudo member, but I strongly feel whichever collective she belongs to should call her in and have a conversation about this. At the same time, I feel we have the responsibility not to pretend this problem is limited to Gwen and at the next sudo meeting we need to brainstorm ways to reform the door policy to be more inclusive.

6 years, 5 months

A blockchain network to enforce policies for decentralized organizations

by Louis Huang

Hi sudoroom, Everything going well on your ends? I haven't been able to keep up to date with the happenings of the collective. Anyways, I'm writing because I recently stumbled upon on a blockchain system which allows for trust-less enforcement of decentralized organization policies. I found the project intriguing and wanted to run this past the community to see what people think about the structure. Using a set of voting classes and judicial review classes written into contracts, the network they built provides transparent governance for the viewing and participation in important decision for open groups. The blockchain network in question is called Aragon. Linked is the white paper for reference: https://github.com/aragon/whitepaper Also written in JavaScript/Solidity, right up sudoroom's alley. Let me know what you guys think. - Louis

6 years, 5 months

Re: [sudo-discuss] [PVForum] #Free Computer CPU's

by Adam Munich

Kristine, I will forward your email to the Sudo room makerspace in oakland, they might want them for their computer lab. ----- Sudoers! Free computers, is anyone at the Omni interested in them? Presumably they are reasonably powerful if they were used for CAD. [see copied email] - - - - Weblog: http://adammunich.com With great power comes great responsibility. On Tue, Nov 5, 2019 at 11:56 AM Kristine Taylor <kristinetaylor8(a)gmail.com> wrote: > Can anyone use 4 large custom built cpu's that were used for video editing > and CAD design. I do not know the details on them as they belonged to my > late husband, but I do know that the hard drives have been removed. I also > have lots of cables, wires and cords for computer installations. > _._,_._,_ > ------------------------------ > Links: > > You receive all messages sent to this group. > > View/Reply Online (#122971) <https://pvforum.us/g/main/message/122971> | Reply > To Sender > <kristinetaylor8@gmail.com?subject=Private:%20Re:%20%5BPVForum%5D%20%23Free%20Computer%20CPU%27s> > | Reply To Group > <main@pvforum.us?subject=Re:%20%5BPVForum%5D%20%23Free%20Computer%20CPU%27s> > | Mute This Topic <https://pvforum.us/mt/42471869/824824> | New Topic > <https://pvforum.us/g/main/post> > Mute #free <https://pvforum.us/mk?hashtag=free&subid=1843651> > Your Subscription <https://pvforum.us/g/main/editsub/824824> | Contact > Group Owner <main+owner(a)pvforum.us> | Unsubscribe > <https://pvforum.us/g/main/unsub> [me(a)adammunich.com] > _._,_._,_ > >

6 years, 5 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss