sudo-discuss

sudo-discuss@sudoroom.org

8 participants
7412 discussions

Fwd [Mesh] Tuesday hacknight tomorrow in SF instead

by aaronco36＠sdf.org

Unsure if the Mailman again crashed, thus causing emails from the past week (including this one) to be sent later. But anyyyywaaaay, here goes.... Quoting Marc Juul <juul at labitat.dk>: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ They Mozilla/NSF WINS event is scheduled tomorrow on top of our normal meeting. More info on the challenge that this event is about here: https://wirelesschallenge.mozilla.org/ There will be a 40 minute panel which will include myself, and I believe Thu Nguyen (the founder of Flowzo), Ahsan Baig (Deputy CIO, City of Oakland) and Kalimah Priforce (CEO, Qeyno Labs). *When and where:* July 25, 6:30 - 8:30pm PT Mozilla Community Space, 2 Harrison St, San Francisco, CA 94105 *RSVP for the event here <https://goo.gl/forms/piPSVK40Y50yJXer1>* -- marc/juul ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Yes, that happened as planned. Robb and others of us at HHN watched and/or heard the live streaming of the Mozilla/NSF WINS event. You all can download and view the stream by visiting https://air.mozilla.org/nsf-wins-bay-area-meet-up/ , choosing the 'Download' tab, and then saving the download from one of the links in that tab as WebM (HD) or Mpeg4 (HD) -- -- I suggest renaming the download to something much more intelligible than the default webm.webm, hd_webm.webm, mp4.mp4 or hd_mp4.mp4. Mark 1st appears at 23 minutes ~49 seconds into the vid, taking his seat and carrying his bottled beverage, and he starts speaking at 24 minutes ~28 seconds. -A

8 years, 1 month

surface mount electronics donation

by Jake

personally i think we should accept those parts, but we've been getting rid of a lot of unnecessary stuff from sudoroom recently (well mostly not me doing it) so anything that we get from them that doesn't belong in sudoroom will get recycled if nobody else wants it. I will say that the last stuff we got from them seems to be pretty decently useful, most of it, so that's a good sign. I don't think we want the carousels though, they seem like the kind of thing you use in a factory where you have plenty of space and need random access fast, whereas we are only going to survive in sudoroom if we can store stuff densely and compensate by keeping good records of where stuff is parked. -jake On Wed, 26 Jul 2017, Patrik D'haeseleer wrote: > By the way - I may be able to get a bunch more surface mount components, > from the same lab from which I brought over several boxes full of spools > before. I assume we want those? > > BioCurious had originally called dibs on two giant 6ft tall 4-sided > carousels of electronic parts that included a bunch of trays with SMD > parts. But now they're just taking up space in their new lab, and they want > to shrink down a bit. We may even be able to get an entire parts carousel. > > Patrik > > > On Wed, Jul 26, 2017 at 1:46 AM, Jake <jake(a)spaz.org> wrote: > >> OK i renamed the repository to pos2charmhigh to match the true name >> so the new link is: >> >> https://github.com/sudoroom/pos2charmhigh/ >> >> Miloh was doing some work on the machine earlier tonight, but he's into >> using >> GEDA not KiCAD, but i'm sure his contributions will lift all boats. >> >> you can push to: >> git@github.com:sudoroom/pos2charmhigh.git >> >> thank you >> -jake >> >> On Tue, 25 Jul 2017, Morgan Allen wrote: >> >> there was a rational behind calling the repo pcb2... but... dunno >>> >>> Anyhow, pos2... is for the fact the KiCad outputs .pos (position) files. >>> >>> Feel free to collaborate where ever, hopefully no one forces you to sign >>> up >>> for GitHub. >>> >>> As for future updates, I can push where ever is most useful. >>> >>> ------------------------------------------------------------ >>> ------------------------------------------------------------ >>> -------------- >>> 2017 Hackaday Prize Entry >>> Any Colored Button <https://hackaday.io/project/19880-any-colored-button> >>> >>> Step 1. Press Button >>> Step 2. ***startupy hand waving*** >>> Step 3. Profit! >>> >>> Likes = Votes. Votes = $1s. $1s = Profits. >>> >>> Step 2 = Vote for Any Colored Button >>> <https://hackaday.io/project/19880-any-colored-button>. >>> >>> On Tue, Jul 25, 2017 at 11:26 PM, Jake <jake(a)spaz.org> wrote: >>> >>> Morgan, i am confused, what's the difference between pcb2charmhigh and >>>> pos2charmhigh? >>>> >>>> I have pcb2charmhigh which i got from github here: >>>> https://gitlab.com/morganrallen/pcb2charmhigh.git/ >>>> >>>> i can't find the source to pos2charmhigh because gitlab doesn't seem to >>>> allow >>>> me to view the source, if it's even there, without creating a login... >>>> which I >>>> don't want to do, partially because they're trying to force me to. >>>> >>>> Anyway, I forked pcb2charmhigh to a sudoroom repository here: >>>> https://github.com/sudoroom/pcb2charmhigh >>>> >>>> so that I and Miloh and others can collaborate on it. >>>> >>>> Will you be updating the pcb2charmhigh repo on gitlab? At least I can >>>> pull from there. >>>> >>>> thank you, >>>> -jake >>>> >>>> On Sun, 9 Apr 2017, Morgan Allen wrote: >>>> >>>> I worked on a thing today. >>>> >>>>> https://www.npmjs.com/package/pos2charmhigh >>>>> >>>>> (roughly) converts KiCAD .pos files to something that resembles the >>>>> Charmhigh CSV file. I haven't tested the output yet. >>>>> >>>>> Jake, when you did your first test run did you run into any issues with >>>>> negative X/Y coords? When I was trying to set a component local [ 0, 0 ] >>>>> was about 1.5" right of the actual components. I could jog it into place >>>>> once with no problem. Then I'd get an error about a negative position. I >>>>> might make it back later tonight to do some more testing. >>>>> >>>>> ------------------------------------------------------------ >>>>> ------------------------------------------------------------ >>>>> -------------- >>>>> 2017 Hackaday Prize Entry >>>>> Any Colored Button <https://hackaday.io/project/1 >>>>> 9880-any-colored-button> >>>>> >>>>> Step 1. Press Button >>>>> Step 2. ***startupy hand waving*** >>>>> Step 3. Profit! >>>>> >>>>> Likes = Votes. Votes = $1s. $1s = Profits. >>>>> >>>>> Step 2 = Vote for Any Colored Button >>>>> <https://hackaday.io/project/19880-any-colored-button>. >>>>> >>>>> >>>>> On Wed, Feb 15, 2017 at 3:24 PM, Jake <jake(a)spaz.org> wrote: >>>>> >>>>> the machine menu is entirely in english. >>>>> >>>>>> >>>>>> awesome job translating! >>>>>> >>>>>> >>>>>> On Wed, 15 Feb 2017, miloh wrote: >>>>>> >>>>>> are there english menu options? >>>>>> >>>>>> >>>>>>> used google translate to get some menu image translations in case >>>>>>> there aren't any. >>>>>>> >>>>>>> On Wed, Feb 15, 2017 at 2:42 PM, miloh <froggytoad(a)gmail.com> wrote: >>>>>>> >>>>>>> chrome browser reads the unicode chinese characters in your text file. >>>>>>> >>>>>>>> >>>>>>>> http://spaz.org/~jake/pix/pnp/placeonepart.txt >>>>>>>> >>>>>>>> google translate makes a lot of sense with these strings. >>>>>>>> the pinyin is useful for cafl speakers who dont read as much hanyu to >>>>>>>> sound out everything >>>>>>>> >>>>>>>> >>>>>>>> %,原点偏移,X,Y, >>>>>>>> %,Yuándiǎn piān yí,X,Y, >>>>>>>> %,origin offset,X,Y >>>>>>>> >>>>>>>> %,料栈偏移,料栈号,X,Y,进给量,注释 >>>>>>>> %, Liào zhàn piān yí, liào zhàn hào,X,Y, jìn jǐ liàng, zhùshì >>>>>>>> %, Material stack offset, material stack number, X, Y, feed, comment >>>>>>>> >>>>>>>> this might befor arrays. >>>>>>>> >>>>>>>> %,拼板1,X,Y, >>>>>>>> %, Pīn bǎn 1,X,Y, >>>>>>>> %, Puzzle 1, X, Y, >>>>>>>> >>>>>>>> you had me at 'puzzle' >>>>>>>> >>>>>>>> %,贴头号,料栈号,X,Y,角度,高度,跳过,速度,说明,注释 >>>>>>>> %, Tiē tóuhào, liào zhàn hào,X,Y, jiǎodù, gāodù, tiàoguò, sùdù, >>>>>>>> shuōmíng, zhùshì >>>>>>>> %, Sticker number, material number, X, Y, angle, height, skip, speed, >>>>>>>> description, comment >>>>>>>> >>>>>>>> good bits here >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Wed, Feb 15, 2017 at 2:29 PM, Jake <jake(a)spaz.org> wrote: >>>>>>>> >>>>>>>> last night i programmed the pick&place machine to place a capacitor >>>>>>>> >>>>>>>>> from >>>>>>>>> material slot 3 onto this board, rotating 90 degrees in the process, >>>>>>>>> and >>>>>>>>> placing it perfectly. >>>>>>>>> >>>>>>>>> here's the video: >>>>>>>>> https://www.youtube.com/watch?v=AuNQKG_SQ30 >>>>>>>>> >>>>>>>>> anyway, i made the machine save the program to a .csv file which it >>>>>>>>> named >>>>>>>>> new1.csv and then i copied it and inserted comments for us to >>>>>>>>> discuss, >>>>>>>>> each >>>>>>>>> delineated by a # sign. Note that I do not expect the machine to >>>>>>>>> allow >>>>>>>>> comments in .csv files it's given, but i wanted to show where my >>>>>>>>> comments >>>>>>>>> were. >>>>>>>>> >>>>>>>>> I don't know what the upper-ASCII encoding is, but it's surely >>>>>>>>> chinese, >>>>>>>>> so >>>>>>>>> if >>>>>>>>> anyone can figure out how to convert and translate it that might >>>>>>>>> help >>>>>>>>> us. >>>>>>>>> Also >>>>>>>>> the manual is in Chinese so lets translate that too. >>>>>>>>> anyway, i made the machine save the program to a .csv file which it >>>>>>>>> named >>>>>>>>> new1.csv and then i copied it and inserted comments for us to >>>>>>>>> discuss, >>>>>>>>> each >>>>>>>>> delineated by a # sign. Note that I do not expect the machine to >>>>>>>>> allow >>>>>>>>> comments in .csv files it's given, but i wanted to show where my >>>>>>>>> comments >>>>>>>>> were. >>>>>>>>> >>>>>>>>> I don't know what the upper-ASCII encoding is, but it's surely >>>>>>>>> chinese, >>>>>>>>> so >>>>>>>>> if >>>>>>>>> anyone can figure out how to convert and translate it that might >>>>>>>>> help >>>>>>>>> us. >>>>>>>>> Also >>>>>>>>> the original manual is in Chinese in a .rar file, although there >>>>>>>>> seems >>>>>>>>> to be >>>>>>>>> a >>>>>>>>> .PDF version of it in english, are they the same? >>>>>>>>> >>>>>>>>> anyway here's the files: >>>>>>>>> http://spaz.org/~jake/pix/pnp/ >>>>>>>>> >>>>>>>>> of course the next step is to add more steps to the program at the >>>>>>>>> machine, >>>>>>>>> and >>>>>>>>> tell it to make multiple boards, so that we can suss out what those >>>>>>>>> other >>>>>>>>> lines >>>>>>>>> are for. although to be honest i haven't read the manual yet and >>>>>>>>> maybe >>>>>>>>> it's >>>>>>>>> all explained in there. >>>>>>>>> >>>>>>>>> -jake >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >> _______________________________________________ >> sudo-discuss mailing list >> sudo-discuss(a)lists.sudoroom.org >> https://sudoroom.org/lists/listinfo/sudo-discuss >> >> >

8 years, 1 month

#5MoF?

by robb

Does anyone want to be MC for the next #5MoF <https://sudoroom.org/wiki/5MoF#Future_of_5MoFs>? The next one would be on Aug 2. Thx ~r

8 years, 1 month

Invoice 1161 from Omni Commons

by Omni Commons

Dear Sudo Room, Here's your invoice! We appreciate your prompt payment. Thank you for stewarding the commons. Love and solidarity, Omni Commons ------------------------ Pledge Summary -------------------------- Invoice # : 1161 Invoice Date: 08/01/2017 Due Date: 08/25/2017 Terms: Net 25 Amount Due: $2,000.00 The complete version has been provided as an attachment to this email. ---------------------------------------------------------------------

8 years, 1 month

Re: [sudo-discuss] Monthly sudo meeting tonight at 7 pm!

by aaronco36＠sdf.org

Pls de-confuse me (and perhaps a very few others?) According to sudoroom.org/pipermail/sudo-discuss/2017-July/013439.html , the 'Monthly sudo meeting tonight at 7 pm!' was dated last week for Wed Jul 12 2017 and is just now reaching my Inbox. Was there a delay in getting out last week's notice (as I think likely), or is/was the notice for _tonight_?? Adding to the confusion is that _today's_ posting sudoroom.org/pipermail/sudo-discuss/2017-July/013445.html is for someone trying to come by during 2nd shift -- was 1st shift _last_ Wed? was 1st at last night's HHN? or is 1st as later on _tonight_ O.o?

8 years, 2 months

Let's organize sudo room!

by Marc Juul

Last wednesday, inspired by the organizing Adam, Jenny and Robb have been doing at sudo, some of us went and got a bunch of transparent plastic bins in various sizes and cleared out one of the big shelving units. Let's continue the effort tonight! We can ask the hardware hackers for opinions on how to sort various things, since it's also hardware hack night! -- marc/juul

8 years, 2 months

can someone please host Hardware Hacking Tuesday tonight at 7?

by Jake

i am out of town for tonight and next week's edition of Hardware Hacking Tuesday! who will host in my place? you just have to welcome new people to the space, help them find places to sit or hack, and try to help them with their projects, etc..

8 years, 2 months

Fwd: [nobawc-announce] Position Opening at Future Worker-Owned Cooperative

by mattsenate＠gmail.com

I can think of many sudoers who would be most excellent candidates for this job posting. Lmk if I can help support in application, resume, cover letter, or interview! Cheers, Matt ----- Forwarded message ----- From: "\"max.w urbanore.com\" (via nobawc-announce list)" <nobawc-announce+max.w=urbanore.com(a)lists.nobawc.org> To: <nobawc-announce(a)lists.nobawc.org>, <info(a)nobawc.org> Subject: [nobawc-announce] Position Opening at Future Worker-Owned Cooperative Date: Tue, Jul 18, 2017 11:20 AM Hello, I work for Urban Ore, a company that is transitioning to the worker-owned coop model. An Administrative Manager position is opening up here; the role will be very important for making the transition happen, so we want to make sure that the opening is published to the right channels. I've attached a one-page precis that includes further instructions for application. Your help is much appreciated! Thank you, Max Max Wechsler Assistant Operations Manager Urban Ore, Inc. "To End the Age of Waste" O: 510-841-7283 X 306 M: 267-247-6052 ____________________________________________________________ You received this message as a subscriber on the list: nobawc-announce(a)lists.nobawc.org To be removed from the list, send any message to: nobawc-announce-unsubscribe(a)lists.nobawc.org For all list information and functions, see: http://lists.nobawc.org/lists/info/nobawc-announce

8 years, 2 months

Fwd: Collaborate with UC Berkeley on Wearable & Accessibility devices

by Patrik D'haeseleer

Anyone working on Wearable & Accessibility devices, who would like some help from a team of biomechanical engineering students this fall? Looks like a great opportunity, if you have a project idea in this direction... Patrik ---------- Forwarded message ---------- From: Shashank Shekhar <shashank(a)riipen.com> Date: Tue, Jun 27, 2017 at 1:56 PM Subject: Collaborate with University of California, Berkeley this Fall! To: ahnon(a)counterculturelabs.org Hi Ahnon, Could your team benefit from collaborating with *Senior Mechanical /Bio Engineering *students from *University* *of California* , *Berkeley* on an engineering project of your choice? Each Student group will devote over 240 hours of effort to improve existing product portfolio, UI improvements, biometrics enhancement and also customer research and market analysis. *Project examples include, but are not limited to:* - Products with better accessibility - Improving biometrics - Manufacturing prototypes You can learn more about this opportunity at https://riipen.io/assignments/ 208/details <http://241.43.148.146.bc.googleusercontent.com/l/VZvpBm0Yor> Are you available for a quick call to discuss further this week? I look forward to connecting! Sincerely, *Shashank Shekhar <http://241.43.148.146.bc.googleusercontent.com/l/eyVZraE1TA>* Connectiing Associiate Riipen <http://241.43.148.146.bc.googleusercontent.com/l/91XvVJYp0m> *Mobile:* <http://241.43.148.146.bc.googleusercontent.com/l/N58gOqL2jo>*778 922 0676 <(778)%20922-0676>* *Email:* <http://241.43.148.146.bc.googleusercontent.com/l/VyyKIF7PwB>*shashank(a)riipen.com <http://241.43.148.146.bc.googleusercontent.com/l/YUrCsTVbX8>* *Website:* *www.riipen.com* <http://241.43.148.146.bc.googleusercontent.com/l/TFEF0rukjd> Book a meeting or call with me! <http://241.43.148.146.bc.googleusercontent.com/l/XaT5uRk2aJ> Unsubscribe <http://45.243.154.104.bc.googleusercontent.com/unsubscribe/33940A6AC390D480…>

8 years, 2 months

call for motors

by Morgan Allen

Hey all! So random thing happened on Wed. We decided to enter tomorrows DNA Lounge Robot Bartender Challenge. Things are going surprisingly well. One thing that isn't going so well is the speed of making a drink. So hoping someone might have 4 match(ish) brushed DC motors with ~2mm shaft. HALP!

8 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss