sudo-discuss

sudo-discuss@sudoroom.org

7 participants
7410 discussions

Start a nNew thread

How do you get into sudoroom

by Gregg Horton

12 years, 2 months

On the technical and legal aspects of security, transparency, and audibility of the NSA surveillance data.

by Jae Kwon

There is debate about whether the NSA's PRISM program is related to Palantir's products. http://www.dailykos.com/story/2013/06/23/1218189/-HBGary-Palantir-Prism-Fac… Whether they are related or not, it seems that the government's claims of transparency and audibility of the NSA's PRISM program is related (perhaps directly) to the claims of Palantir's. Search for "immutable auditing" below: http://www.palantir.com/wp-content/static/pg-analysis-blog/2009/07/Privacy-… It seems that even professor Lessig has bought into their marketing. http://lessig.tumblr.com/post/54268127504/on-the-freedom-to-speak (Palantir's product is the kind of thing that prof Lessig had always wanted, as you can read in his book "Code: and Other Laws of Cyberspce". In trying to strike a "balance" between copyright and privacy, prof Lessig proposes solutions that fail to prevent blanket government surveillance.) We need to scrutinize these technically incredible claims. I wager that for any given system that touts immutable audibility, there is a way to hack around it. As long as the NSA can tap the wires and record information in vast databases for cold storage, we are absolutely in risk. Technical/legal concepts that need to be scrutinized: * immutable audit log (see http://www.std.com/~cme/non-repudiation.htm) * non-repudiation * chain of custody - JaeKwon

12 years, 2 months

chez hack donations

by John Lockwoos

hi, i live in marin and heard about the hackerspace starting. i would not only like to be involved, but would like to donate an extra office chair. its in my car and was going to go a thrift shop tomorrow. would it be welcome and can i drop it off today? if so, address? -John

12 years, 2 months

Does Sudo Room need one of these?

by Ray Lai

http://www.engadget.com/2013/06/27/handibot-smart-tool-hits-kickstarter Raymond Lai Ice Cream Man Atomic Ice Cream Facebook.com/MotoAtomico

12 years, 2 months

DOORCAM README (redacted for SR security)

by johanna faust

** * NOTE PLEASE: ‡ means the actual exact details are in the confidential readme, attached, whose password you should know, which i strongly encourage SRers read instead of this. plus the layout didn't get screwed up. in particular, what looks like redactions below is merely what happens when you cut and paste graphics. ‡'s are where the info was. ok. * * * * * * * * * * * * * * * *Concernynge The Camera, &c,* *or,* *Some Obseruations * *Happily Pursuant * *to a * *Greater Securitie* ** *a hopefully platform-independent explanation * *of her work so far* *by* *a female faust* * * * introduction* because i only did what i knew i could, of all i conceive may be true about this setup, certainly it needeth a readme, by way of explanation. therefore, upon well founded advice i hereby attempt to document my work (something i have never done before in this realm) & thus enable & invite help to advance the cause...... * what about that machine downstairs?* warning : if that cam is not recording i will have to go back in & do some more cobbling, more frankensteinian *(/fræ*ŋ*k-*ɛ*n-*ʃ*t-ēē-nē-*ə*n/)** *than faustian no doubt. because it has to work. a. s. a. p... and because it doesn't work if - it doesn't work - it isn't persistent, or - it doesn't record and would be better if - it can be (securely) accessed from elsewhere other than the computer to which it is attached - it auto uploaded so we didn't have to worry * * * the way i did the doorcam:* the [image: Picture 3.png] is running the smartest OS X (which means that the eminently useful OS 9 has already been broken on it, but can be reinstalled). (however the *Terminal* on it should have most if not all of what you would expect from a 'nix box). An awesome & awesomely painless tutorial that introduced me to *QuickTime Broadcaster*, courtesy of murphymac.com, may be found here<http://murphymac.com/slib/quicktime-broadcaster.htm>; consider it a readme on the program. The version of it that i used came from here <http://ftp.iinet.net.au/pub/apple/quicktime/qtbroadcaster/>; the pro version of QT from here<http://www.oldapps.com/mac/quicktime.php?old_quicktime=20>* (it says you don't need QT pro but I think you do); the macam download from here <http://sourceforge.net/projects/webcam-osx/?source=dlp>. *more specifically * the relevant files in the box's Apache Webserver (* Library/Webserver/Documents/*) that were used to create what was semi up & running are all called "*works" -- *no filetype for the program-specific * settings* files; the .*sdp & the .mov *for the exported files upon which one must click should one want to stream the image. if you want to change any of the settings you can only do so when it is NOT broadcasting. audio has been disabled by default, to save cpu goodness. i was doing multicast with auto generated IP addresses -- it generates two, one for video & one for audio anyway -- & assigns port numbers automatically. i don't know how this is supposed to work if the audio is enabled, the two address thing. the exported file "*works.mov*" is easily parsed by QuickTime, on a machine running OS X, & on one running Vista. the exported file "*works.sdp*" is easily parsed by VLC, on a machines running OS X, & on a machine running i-didn't-ask-but-possibly-linux. please see the awesome & awesomely painless murphymac tutorial mentioned above, if for no other reason than the awesomeness. well, that & that it tells you almost everything you need to know. *because i wanted it to stream painlessly* i needed the stream to not be overly consumptive of bandwidth: i was looking for a way that it could be served by an intermediary computer. i am relatively new at this (no! really?) so i am not sure without further study if my solution accomplished this.... it would have to work well first... but here's what i did (with some detail in case any one wants to follow up on one of the other alternatives so they can have what benefit may be had from my work). *youtube* i tried to upload the .*mov *to youtube but it was not fooled by the Quicktime wrapper. *blogger version one* ditto blogger. *ustream* i had tried to stream using the camera & *ustream.tv* originally, on the account i made just for that purpose, but *'/%@ ustream, probably in an effort to make the user either go pro or upgrade or both, makes it extremely (*extremely) *difficult. could not log in -- buttons unclickable or missing, kept redirecting to a sign up page. i hate it when i am told i cannot do something for no ≈®&/?†&$! reason. so i logged in with my other, slightly newer power-pc laptop -- whilst sniffing the exchanged packets -- studied the results & cobbled together some urls. so if you want to log into ustream, there's a file with a couple urls in it, ‡ & there's a folder with some relevant cookies in it‡. i really don't think the cookies are that relevant, but if they are, replace the ones already there with them.‡ the file is visible.‡ open it & you will find the following two url's‡ -- enter the long one & then the short one into the address bar of *Safari* ([image: Pasted Graphic 5.tiff].in the dock, or click on the Finder, or on the Desktop background, & go to /Applications/Safari) (sure, install Firefox, but it will be slow!) the long one will return a whole bunch of plaintext, or it will download it. ignore that & enter the shorter one anyway. ‡ you are then on the dashboard. *et voila.* however, i found had the same problem again when i wanted to broadcast or *go-live *as the natives call it, & no longer had the patience. if someone wants me to i can sniff & cobble for that as well -- shouldn't be hard. whatever that means. i may do it anyway -- then we wouldn't have to worry about recording -- & wouldn't need an application running on the box -- or would at the very least, if we ran both, have a backup. *what i ended up doing* was taking the .*mov*‡ & encoding it in base64, something that i have been known to do & may in fact be quite... *fond...* ....of. let's leave it at that for now, hmmm? in any event by doing so, that is, by borrowing the structure of the old embed code that youtube, which is google, still supports (because untold millions of embeds would break otherwise), & plugging in the *data-encoded URI*, i was able to get it past Blogger. the html:‡ *<object height="315" width="420"><param name="movie" value="data:video/quicktime;base64,blahblahdataencodedblah"></param>* *<param name="allowFullScreen" value="true"></param>* *<param name="allowscriptaccess" value="always"></param>* *<embed src="data:video/quicktime;base64,blahblahdataencodedblah" type="video/quicktime" width="420" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>* and the result was live (at least on the boxes i tested, more on that below) at my least visited (and least used) blogspot.‡ *if the camera becomes unrecognized * at first -- way at the beginning, after i set up the [image: Pasted Graphic.tiff] -- the camera went unrecognized, since it was not firewire; it became recognized & remained so after i futzed with it. here's what i did: - renamed the top usb port with *open firmware* so that open firmware thought it was firewire ‡ - (*sudo nvram* probably has a way but - i did it by booting into *open firmware *by holding down the "o" & "f" keys at startup & then - entering "*devalias*" & - noting the pci hw address of the top usb port which one could tell because the keyboard & mouse were in the other one, & then - "*devalias [whatever-i-nicknamed-the-firewire] [/the-old-firewire-address]*"‡ to save the address somewhere i wouldn't misplace it & everyone else could get to it & - "*devalias fw [/whatever-it-was/hub@ -whatever-wasn't-the-keyboard]*"‡ to name the usb port the traditional "*fw*" which all the other routines would expect firewire to be called - "reset-all" which restarts the machine - AND - by opening Terminal ([image: Pasted Graphic 9.tiff] in the *dock** *or* /System/Applications/#1Utilities/Terminal*) & piping the command at the heart of the application *macam *to the command at the heart of *QuickTime Broadcaster, *a terminal command that looks like "*/Applications/macam | /Applications/QuickTime\ Broadcaster*)‡ after which it FINALLY recognized the camera, & has ever since. *if a way cannot be found to record the stream* pipe it over the network to the upstairs computer (watch that tutorial & it will be a snap -- there's a setting to broadcast to just one machine) & record it from there. DO NOT TRUST the "*save to disk*" feature unless you personally verify that the resultant files may be played. they are certainly fat enough to be movies, & they look like movies when i opened them as text (something i love to do), but i could not get functioning videoplayback. if that fails just attach a big enough hard drive externally, quit *quicktime broadcaster & *either use *quicktime** *(a pro version is installed on the box) or better yet, *macam*, which leaves a smaller footprint. waaa. i wanted streaming! but last i checked, there was this problem: *the stream cannot be seen from outside* as the kind soul who chatted with me‡ & others are well aware, though when i actually did leave, one SRer‡ was able to get the stream on his machine. he was, however, inside. the SRer i chatted with earlier‡ pointed out that only being able to get the stream from inside may be all for the best; i will leave that up to what people think. i do not, however, consider it a detriment to my privacy. as a matter of fact, this is one of the rare cases in which i find that i feel the surveillance *enhances* my security, rather than threatening it. that said, i have thought quite a bit about why it seems the stream was not available from outside the local network, & have come to the conclusion that the camera needs to be assigned a static domain-style URL, that points to the LAN ip address, even though the broadcast addresses that the program assigns are static. there is a place i think in the netherlands that has a free dns updating service for just such eventualities, & gives static addresses like DYNDNS used to give, with a freeware updater. & i will probably test this theory. *remember* if you change any of the settings, in order to stream you have to go to the menu along the top of the screen while it is broadcasting & hit *export. * *please *leave me a note if you do, attached to this thread if possible or privately. i will be ever so happy to do the weird data encoding stuff to get the webpage up & running as well. (i think that's cool). & if it all the well no hitch, perhaps then it can graduate & be official on the SR website! *other notables* - the camera needs a drape or divider behind it to block out backlighting, which interferes with the image. - we could use more cameras of course - a real extension cord would rock - locking is good - i was thinking the happy-sudoers-and-oakland-folks-together altar that i made to inaugurate the new era of beefier security could go on top - there needs to be a cabinet or something to put the computer & associated equipment in - i have one in mind that just needs doors put on - that is why i positioned the sign as i did on wednesday, i realize that is not a daytime solution - if anyone else has cabinet ideas please feel free, only do drop me a line please so i don't do unnecessary work - i welcome any ideas, suggestions, comments: - of course i would prefer if others built on what i have done, but - i know what is really important. - i did this because it needed to be done, - i really don't want another incident, however minor, to occur & catch us with our camera down. - it isn't over until the fat lady, after drinking her celebratory pint of Guinness & going outside for a smoke, - finds that the video camera downstairs catches her likeness, - clearly, as she leaves, - and records it.** be seeing you. ** *notes* ** *‡ means the actual exact details are in the confidential readme which i strongly encourage SRers read instead of this. * *and here: www DOT keygenguru.com SLASH sn SLASH apple_quicktime_7_4_1 DOT html **and then it isn't over; it just began.......

12 years, 2 months

need powered usb hub, if you have one to donate please msg me off list

by Max Klein

12 years, 2 months

Fwd: Re: Stopping anti-drug resistant bacteria w/ data published for open access public domain use

by Louis Huang

Thanks Craig, for posting the ad. Due to Gonorrhea's anti medical resistant nature, there is coming to a point where the bacteria is becoming resistant to the old ways of treatment (3rd generation treatment). This project was organized and started by Craig, with contribution to a few other Sudoroomers to research new ways to treat Gonorrhea in the community using a radical new method, which was developed in the soviet era, but since forgotten. What is different about this group's research is that all the data, unlike corporate sponsored and academia, will be published for the public domain, free and open source, following to the guidelines of sudoroom itself while maintaining credibility. Open source scientific data is a new frontier that has been unexplored. And with this closed world, citizen scientists must step up to the rights of free access information. We ask that your donation to make this possible here: http://www.wepay.com/donations/gonorrhea-eradication-team. If you like to know more about the project and how to contribute please contact Craig, email below. Thanks for your time. -Louis --- Louis T. Huang http://aegia.nu/ +415.676.0179 louis.huang(a)aegia.nu -------- Original Message -------- Subject: Re: [sudo-discuss] Fwd: Marina, today is the last day to receive $50 off Workshop Weekend: Arduino admission! Date: 2013-06-28 17:52 From: Craig Rouskey <craigrouskey(a)gmail.com> To: Cc: "sudo-discuss(a)lists.sudoroom.org" <sudo-discuss(a)lists.sudoroom.org> Hello! For those of you who don't know, my name is Craig. My fellow citizen scientists in the Bay Area and I are launching our project aimed at monitoring and ERADICATING ANTIBIOTIC RESISTANT GONORRHEA USING PHAGE THERAPY. We need your support! We are nearly ready to begin our screening program and are bootstrapping the project as we speak! Please read the following information and let us know how you would like to help. If you are able to contribute funds (i.e. support our laboratory rental fees, help us purchase equipment, reagents or supplies, or support the screening of individual patients, please contribute through our online WePay campaign. If you would like to contribute by lending your time, talent, or expertise, please feel free to reply to this e-mail! WePay campaign: http://www.wepay.com/donations/gonorrhea-eradication-team [5] Project Site: http://www.sudoroom.org/wiki/Phage_therapy [6] ABOUT US: We are a volunteer group of experienced citizen scientists working to foster healthy communities through innovative medical research. Our team includes PhD and Masters-level microbiologists, immunologists and cellular biologists. Together, we are taking on our first major project: the eradication of antibiotic resistant gonorrhea! We would like to work with you to: (1) Implement an on-the-street Gonorrhea screening program; (2) Provide a consistent feed of data that is open to the public (open-access); and (3) develop novel, phage therapies for the treatment of antibiotic resistant Gonorrhea. WHY ANTIBIOTIC RESISTANT GONORRHEA? Since the 1970s, the bacterial pathogen Neisseria gonorrhoeae (Gonorrhea) has been developing resistance to 3rd generation antibiotics. These antibiotics are the last line of defense against gonorrheal infection. Antibiotic resistant Gonorrhea is therefore a growing public health concern. In the United States, this concern is exacerbated by the fact that primary treatments for gonorrheal infections are solely antibiotic-based. It is crucial to continuously monitor antibiotic resistant Gonorrhea while researching and developing new, non-antibiotic treatment regimens. SCREENING AND PHAGE THERAPY Patients who participate in free Gonorrhea screenings will have their private results within 24 hours. The results will be available online through our data reporting system. Patients will enter in their Patient ID and self-generated passphrase to obtain their status. From this private, anonymous, and secure data, we will openly and freely publish results detailing the incidence and prevalence of the emerging antibiotic resistant strains of gonorrhea. Upon receiving results, patients will be counseled as to how to seek treatment. Positive results will be reported (anonymously) to the Center for Disease Control and positive samples will be grown in our laboratory. From these samples we will harvest and characterize the viruses that infect Gonorrhea. Bacterial viruses (bacteriophages or phages: viruses that infect only bacteria) are present in all species of bacteria and when active, have the potential to kill or 'shut down' their bacterial host. Infecting Gonorrhea with its own bacteriophage causes the bacteria to die. While gonorrhea is fighting its phage infection, your body will have time to generate a natural immune response to your gonorrhea infection. Bacteriophage therapy is already being used for other infectious diseases including tuberculosis and with your commitment, we can make this new gonorrhea treatment a reality! There are many ways to participate in this project! By contributing funds you can either support our lab rental, fund our equipment and reagent purchases, or fund our screening program. You can also participate by coming to our weekly meetings and lending your scientific brain to the project. Here's to making the world healthier! Craig Rouskey On Fri, Jun 28, 2013 at 3:42 PM, Marina Kukso <marina.kukso(a)gmail.com> wrote: > ---------- Forwarded message ---------- > From: WORKSHOP WEEKEND UPDATES <updates(a)workshopweekend.net> > Date: Fri, Jun 28, 2013 at 3:41 PM > Subject: Marina, today is the last day to receive $50 off Workshop > Weekend: Arduino admission! > To: marina.kukso(a)gmail.com > > Hi Marina, > > I wanted to remind you that today is the last day to register for > Workshop Weekend: Arduino and receive $50 off admission with the code > ARDUINOEARLY713! > > On July 13th and 14th, WE'LL TAKE YOU FROM ARDUINO ROOKIE TO WHIZ > IN JUST TWO DAYS -- if you've been wanting to get started with Arduino > but you have no idea where to start or you're feeling intimidated by > all there is to learn, come join us! > > Arduino is an electronics platform designed for artists, designers, > and hobbyists. Here's just a taste of what kind of stuff you can make > using one: > > * _Arduino Quadcopter_: An autonomous flying quadcopter -- use it to > spy on your friends! > * _The Inebriator_: An automated cocktail mixer -- it won't ask you > for a tip! > * _Laser Harp_: A futuristic musical harp that forgoes strings in > favor of lasers! > * _Secret Knock Door Lock_: A door lock that opens only when the right > knowcking pattern is applied! > * _RC Lawn Mower_: Why break your back in the heat? This lawn mower is > completely autonomous! > * _Tweet-A-Watt_: A power consumption meter that tweets your daily > electricity consumption. > > Unlike past Workshop Weekends, THE ARDUINO WEEKEND IS DESIGNED TO > BRING YOU TO A LEVEL OF DEEP EXPERTISE IN ONE PARTICULAR TOPIC, > comprehensively leading you through all the key steps. Again, YOU > DON'T NEED TO HAVE ANY EXPERIENCE WORKING WITH ARDUINO, > ELECTRONICS, OR PROGRAMMING to attend! > > Check out the full schedule and register here: > https://workshopweekend.net/arduino/catalog [1] > > Also unlike past Workshop Weekends, Saturday's workshops will be the > same for everyone: you'll be guided through three building block > workshops to get you up to speed. On Sunday, you'll be able to work on > your own projects with our team of expert mentors present to give you a > hand, while also enrolling in your choice of advanced workshops on > topics such as advanced programming, working with audio, motors and > movement, and LCD character displays. > > Check out the full schedule and register here: > https://workshopweekend.net/arduino/catalog [2] > > And please reach out to us if you have any questions at all about the > weekend! > > I hope we'll see you there! > > Warmly, > J.D., Rolf, Michael, Malcolm, Lee, Andrew, and the rest of the Arduino > Weekend Team > > To unsubscribe from future mailings, visit > http://workshopweekend.net/learn/unsub?id=bWFyaW5hLmt1a3NvQGdtYWlsLmNvbQ > [3] > > _______________________________________________ > sudo-discuss mailing list > sudo-discuss(a)lists.sudoroom.org > http://lists.sudoroom.org/listinfo/sudo-discuss [4] Links: ------ [1] http://workshopweekend.net/er?url=https%3A%2F%2Fworkshopweekend.net%2Fardui… [2] http://workshopweekend.net/er?url=https%3A%2F%2Fworkshopweekend.net%2Fardui… [3] http://workshopweekend.net/learn/unsub?id=bWFyaW5hLmt1a3NvQGdtYWlsLmNvbQ [4] http://lists.sudoroom.org/listinfo/sudo-discuss [5] http://www.wepay.com/donations/gonorrhea-eradication-team [6] http://www.sudoroom.org/wiki/Phage_therapy _______________________________________________ sudo-discuss mailing list sudo-discuss(a)lists.sudoroom.org http://lists.sudoroom.org/listinfo/sudo-discuss

12 years, 2 months

Soylet project hiring "makers"

by Garrett Robinson

If you haven't heard of Soylent, it's a much-blogged-about and recently crowd-funded attempt to replace the "drudgery" of purchasing and preparing food with a convenient, nutritionally complete beverage. See the original blog posts (quite entertaining) here: http://blog.soylent.me/ Anyway, they just announced they're hiring someone to "mix" Soylent at their facility in Oakland for 5 hrs/day, $20/hr. https://news.ycombinator.com/item?id=5954164 I thought this might appeal both to the hacking and the alternative-income-seeking impulses of many members of the Sudoroom krewe. If anybody ends up doing this, let me know - I'm pretty curious! // Garrett

12 years, 2 months

Fwd: Marina, today is the last day to receive $50 off Workshop Weekend: Arduino admission!

by Marina Kukso

---------- Forwarded message ---------- From: Workshop Weekend Updates <updates(a)workshopweekend.net> Date: Fri, Jun 28, 2013 at 3:41 PM Subject: Marina, today is the last day to receive $50 off Workshop Weekend: Arduino admission! To: marina.kukso(a)gmail.com Hi Marina, I wanted to remind you that today is the last day to register for Workshop Weekend: Arduino and receive $50 off admission with the code * ARDUINOEARLY713*! On July 13th and 14th, *we'll take you from Arduino rookie to whiz in just two days* -- if you've been wanting to get started with Arduino but you have no idea where to start or you're feeling intimidated by all there is to learn, come join us! Arduino is an electronics platform designed for artists, designers, and hobbyists. Here's just a taste of what kind of stuff you can make using one: - *Arduino Quadcopter*: An autonomous flying quadcopter -- use it to spy on your friends! - *The Inebriator*: An automated cocktail mixer -- it won't ask you for a tip! - *Laser Harp*: A futuristic musical harp that forgoes strings in favor of lasers! - *Secret Knock Door Lock*: A door lock that opens only when the right knowcking pattern is applied! - *RC Lawn Mower*: Why break your back in the heat? This lawn mower is completely autonomous! - *Tweet-A-Watt*: A power consumption meter that tweets your daily electricity consumption. Unlike past Workshop Weekends, *the Arduino weekend is designed to bring you to a level of deep expertise in one particular topic*, comprehensively leading you through all the key steps. Again, *you don't need to have any experience working with Arduino, electronics, or programming* to attend! Check out the full schedule and register here: https://workshopweekend.net/arduino/catalog<http://workshopweekend.net/er?url=https%3A%2F%2Fworkshopweekend.net%2Fardui…> Also unlike past Workshop Weekends, Saturday's workshops will be the same for everyone: you'll be guided through three building block workshops to get you up to speed. On Sunday, you'll be able to work on your own projects with our team of expert mentors present to give you a hand, while also enrolling in your choice of advanced workshops on topics such as advanced programming, working with audio, motors and movement, and LCD character displays. Check out the full schedule and register here: https://workshopweekend.net/arduino/catalog<http://workshopweekend.net/er?url=https%3A%2F%2Fworkshopweekend.net%2Fardui…> And please reach out to us if you have any questions at all about the weekend! I hope we'll see you there! Warmly, J.D., Rolf, Michael, Malcolm, Lee, Andrew, and the rest of the Arduino Weekend Team To unsubscribe from future mailings, visit http://workshopweekend.net/learn/unsub?id=bWFyaW5hLmt1a3NvQGdtYWlsLmNvbQ

12 years, 2 months

Front Page Redesign: Put the mesh network on the front of the wiki + the sudoroom.org page

by Romy Ilano

Hi, I'm looking over the SudoRoom projects and the most ambitious, the one most interesting to me, and the one that needs funding now is the Mesh Network. - Could we redesign the front page so that the mesh network is featured more prominently? it is a manifeestation of all the SudoRoom values - Could there be periodical updates so that people can find the donate button and donate to the mesh network? - Could the front of the wiki features the mesh network as the featured project? Personally as a newsreader, I'd prefer to see more discussion of the mesh network on the sudo-discuss list. If there is some kind of security issue then I can understand avoiding doing that. What doesn't appeal to me as a discussion reader is reading lots of self righteousness, or people weakening a viewpoint by going to the extreme. I'm talkinga bout people that wind down into such deep conspiracy theories that they make anyone with a tangentially related theory seem like a total crackpot. Then again, you can do whatever you want. I'm not working on the mesh network right now, I just like the idea of it. It solves so many economic, social, and political issues in one fall stroke. Best, Romy

12 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss