note: this email goes to four lists. Please reply only to the Access and
Building lists to avoid clogging Omni and Sudo lists with this thread.
I just want to bump this thread and see if anyone is available to work on the
physical aspects of the door opener I describe below, and as shown in this
diagram:
http://spaz.org/~jake/pix/omnidoormotor1.png
I am willing to do the electronics part of it and make it work with our
existing system, but I would like others to help with the building of a bracket
to hold the motor in place over the door, and the woodwork and nuts&bolts of
making the 2x2 stick with steel cable attached to it.
-jake
On Tue, 17 Jan 2017, Jake wrote:
> the wheelchair motor that Robb wanted to use for a projection screen
> raise/lower thing is something else.
>
> The motor I want to use for the front door opener is this one:
>
> http://imgur.com/gallery/MLuT7
>
> it's in sudoroom in a milk crate. Robb and I remove the wheel and the tire,
> and now it's ready for the motor to be mounted on a bracket that will hold it
> in the right place, which is slightly higher than the top of the door, and
> basically 2' south of the door's hinges.
>
> then, a 2x2 of wood will attach to the top corner of the door with a hinge,
> and
> it will have a cord of this rubber-wrapped steel cable (which I have) go from
> one end of the 2x2 to the other, taking a couple of turns around the motor
> wheel. It will look like this:
>
> http://spaz.org/~jake/pix/omnidoormotor1.png
>
> as you can see from this diagram, when the motor turns its wheel clockwise
> (as
> viewed from above) the 2x2 stick will be pushed in the direction that opens
> the
> door. If it's not clear, the rubber-wrapped steel cable (shown in red/black
> stripes) is attached to the 2x2 stick at both ends, but it makes a couple of
> turns around the wheel of the motor on its way.
>
> anyway, i chose this motor because when it's not being energized with
> electricity, it's free-moving which means it won't interfere with regular
> door
> movement. But when we activate it, it will be strong enough to open or close
> the door as we tell it to do.
>
> The issues you mention about battery backup are not a problem. We already
> have
> a battery backup for the front door card (and soon RFID) access system, and
> this motorized thing will be battery-backed as well.
>
> I am willing to do the electrical part of this project, and I have already
> acquired the rubber-coated steel cable and motor, but I ask that other people
> take care of mounting the motor on a suitable frame above the door and help
> make the 2x2 stick on a hinge which will attach to the door.
>
> I will be at sudoroom tomorrow night (tuesday night at 7) in case anyone
> wants
> to meet with me about this.
>
> -jake
>
> On Mon, 16 Jan 2017, David Keenan wrote:
>
>> I remember hearing about that wheelchair motor -- if it's the same one,
>> last I heard Robb had wanted to use it to raise/lower a projection screen
>> for the stage..? So I didn't think of it for this project, but if we can
>> use it and save ourselves some money, that's great!
>>
>> I realize you may have already considered this aspect but as a DIY opener
>> will also need to comply with code requirements, do you think you can
>> design a system measurably compliant with:
>>
>> - opening / closing force (<5lb) and speed (max. *N* seconds to close)
>> requirements throughout the swing, during automatic operation and manual
>> operation per ANSI/BHMA A156.19 for low-energy-operated doors, ICC A117.1,
>> ADA and whatever may be found in CBC?
>>
>> - req'd UPS / backup battery power for opener, for *N* many operations
>> (need to look it up)
>>
>> - compliant location of upper and lower door actuators (buttons), assume
>> this will be no issue
>>
>> If it's helpful, here is a decent article I found that glosses the subject
>> of codes for low-energy openers:
>> http://www.constructionspecifier.com/understanding-new-accessibility-requir…
>> <http://www.constructionspecifier.com/understanding-new-accessibility-requir…>
>>
>> Given the above, and I realize I only now just brought this up to you, but
>> I guess my only concern about any DIY implementation is, if you / access
>> group has the time to implement it relatively soon..? E.g., do you think it
>> might be possible to complete in the next 2-3 weeks or so..?
>>
>> I realize perhaps that is an unfair question to ask before you've really
>> started hacking on it, but I'm also trying to be realistic and pragmatic
>> wrt to how busy everyone is and the understandably extended timelines of
>> volunteer labor in general that comprises the bulk of omni efforts --
>>
>> If after reviewing the door req's, you think a DIY system is doable in the
>> next 2-3 wks, let me know how / when I can help hack on this and I will
>> follow up with you and access control group directly -- and perhaps we can
>> set a date to meet up about it?
>>
>> Best,
>> David
>>
>> On Mon, Jan 16, 2017 at 12:20 AM, Maureen Muldavin <muldavin.m(a)gmail.com>
>> wrote:
>>
>>> If you are working on RFID cards any possibility that the entrance to
>>> sudo/ccl could get a card reader? Been wanting access control for
>>> awhile.
>>>
>>> On Sun, Jan 15, 2017 at 11:46 PM, Jake <jake(a)spaz.org> wrote:
>>>> i brought in a wheelchair motor a while ago that I think could be made
>>> into
>>>> a
>>>> power door-opener pretty well.
>>>>
>>>> I can work on a proof-of-concept for that and then be able to show you
>>> what
>>>> I
>>>> mean, and then we can see if it will be good enough for our needs as
>>> opposed
>>>> to
>>>> spending $2800 on a "proper" door opener.
>>>>
>>>> as for the RFID cards, Alex and I have been working on implementing the
>>> card
>>>> reader thing for a little while and I think I can add it to the front
>>> door
>>>> pretty relatively easily.., and I guess i'll do that first, rather than
>>>> trying
>>>> to do a storage closet first?
>>>>
>>>> as always, if anyone wants to participate in this process they should
>>>> definitely jump in, otherwise it's subject to my chaotic schedule.
>>>>
>>>> technical questions about making this happen should be sent to the access
>>>> list
>>>> and possibly the sudoroom list, but probably not the building list as it
>>>> will
>>>> be a major distraction if we get into the weeds of microcontroller boards
>>>> and
>>>> door server code...
>>>>
>>>> also, yes I do have the box of RFID stuff you ordered and i've been
>>> working
>>>> on
>>>> it~
>>>>
>>>> -jake
>>>>
>>>> On Sun, 15 Jan 2017, David Keenan wrote:
>>>>
>>>>> Hi Jake / access control folks -
>>>>>
>>>>> So now that our front door is publicly labelled as accessible, we need
>>> to
>>>>> install an automatic door opener & remote button (kickplate &
>>> hand-height
>>>>> or a long bar) to make it legal.
>>>>>
>>>>> Reason I bring this up to you guys is, the opener system will need to
>>>>> integrate into our existing/future access control somehow. The quote I
>>> got
>>>>> is $2800 (50% parts, 50% labor) for a package including the Open Sesame
>>>>> Model 233 (brochure
>>>>> <http://www.opensesamedoor.com/index_htm_files/open_sesame_brochure.pdf
>>>> ,
>>>>> spec
>>>>> sheet <http://www.opensesamedoor.com/index_htm_files/specs_model233.pdf
>>>> ),
>>>>>
>>>>> made in San Leandro.
>>>>>
>>>>> Also, some of us met last week re: sketching out Omni's accessibility
>>>>> plan,
>>>>> and Yar suggested this might be a good time to also implement RFID
>>> system
>>>>> for the front door, if that was possible? In part because, proximity to
>>> an
>>>>> RFID fob is more accessible than a card swipe which (after thinking
>>> about
>>>>> it) I realized requires a pincing motion that is likely not ADA...
>>> because
>>>>> of the excessive door opening pressure and iffy slope on the front
>>>>> landing,
>>>>> we need an RFID & auto-opener.
>>>>>
>>>>> So -- I'm not sure if any more work has been done on the RFID systems I
>>>>> put
>>>>> in sudo a little while ago (stashed in under-stair storage area), might
>>> it
>>>>> be possible to integrate these into the door opener? I note in the
>>>>> brochure
>>>>> they offer a keypad access option - perhaps an opportunity for 2-factor
>>>>> authentication like Marc had talked about? Anyhow what do you guys
>>> think?
>>>>>
>>>>> I apologize for not helping y'all more with a better access control
>>> system
>>>>> (helping spaces post-ghostship consumed my bandwidth), but as there is
>>> now
>>>>> renewed pressure I want to help as I can. Would installing a trial
>>>>> RFID/throw on the Omni Office for example still be helpful towards
>>> getting
>>>>> this nailed down? Lmk
>>>>>
>>>>> Fwiw - I see the opener as pressing at this point not just 'cause its
>>> long
>>>>> overdue, but because every day our front door is labelled as accessible
>>>>> when it's technically not, is actually a not-insignificant liability
>>> issue
>>>>> (accessibility lawsuit). Plus of course, we are still under scrutiny by
>>>>> the
>>>>> city, nimby neighbors trying to call us out for bogus reasons, etc etc.
>>>>> And
>>>>> per building code the front door must be made fully accessible before
>>> any
>>>>> other accessibility work starts on the rest of the building - at some
>>>>> point
>>>>> an inspector's gonna notice since they all go through that door..anyhow.
>>>>>
>>>>> Let me know how myself & those of us working on accessibility might be
>>>>> able
>>>>> to help -
>>>>>
>>>>> Best,
>>>>> David
>>>>>
>>>>
>>>
>>
> _______________________________________________
> access mailing list
> access(a)lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/access
>
There isn't one on the calendar at https://sudoroom.org/calendar/
Is anyone planning to show up tonight? I need to leave soon if I'm
going to get there at a reasonable time (coming from Santa Clara).
Perfectly willing to provide mac and cheese again tonight, but I don't
want to go if no one will be there.
--
Charley Sheets
Nice try Dom Tullipso.
Date: Tue, 17 Jan 2017 17:25:44 -0800
> From: Autonomous <autonomous666(a)gmail.com>
>
> As a Demand Protest operative you will receive a monthly retainer of $2,500
> on top of our standard per-event pay of $50/hr, as long as you participate
> in at least 6 events a year. We are extremely flexible and can work with
> almost any existing work schedule. Full-time operatives receive health,
> vision and dental insurance for families, flexible vacations, and paid
> trainings. Travel expenses are always paid.
>
> http://sf.backpage.com/MiscJobs/get-paid-fighting-against-trump/48800067
>
> Q: Who funds this?
>
As a Demand Protest operative you will receive a monthly retainer of $2,500
on top of our standard per-event pay of $50/hr, as long as you participate
in at least 6 events a year. We are extremely flexible and can work with
almost any existing work schedule. Full-time operatives receive health,
vision and dental insurance for families, flexible vacations, and paid
trainings. Travel expenses are always paid.
http://sf.backpage.com/MiscJobs/get-paid-fighting-against-trump/48800067
Q: Who funds this?
...which is most irrational and patently absurd, so if i ever do it myself,
i sincerely hope i catch myself, cease, and desist (and 'catch myself'
includes being caught: let's put the virtue -- the 'face' -- back into
willing admission/self-correction of error).
here's a philosophical hypothesis: it might all go back to the concept of
'usury' and the dominant concept of money.
this might best be illustrated by an often mistranslated, or misremembered
adage:
*AMOR PECUNIÆ RADIX MALORUM*
money is not the root of evil. * the love of money* is the root of evil.
anyways,
ff
On Wed, Jan 18, 2017 at 9:23 AM, Sonja Trauss <sonja.trauss(a)gmail.com>
wrote:
> "our" side does this reasoning all the time. When I went to the Forest
> Hill neighborhood meeting about a proposed senior housing project the SF
> Mayor's office wants to build there was a woman there accusing me and my
> friend Tim of being a real estate shills because we were in favor of it.
> It's classic to accuse your opponents of only doing what they do because of
> money. Everyone does it when they can't imagine a rational person having a
> different point of view.
>
> On Wed, Jan 18, 2017 at 9:01 AM, johanna faust <female.faust(a)gmail.com>
> wrote:
>
>> the question is, is it actually fake? because i see no harm in enabling
>> people - many of whom would not be able to otherwise - to dedicate
>> themselves to something they believe in.
>>
>> non-profits are built on this principle, no?
>>
>> another instance of "the other side's" faulty reasoning.
>>
>>
>> ff
>>
>>
>> On Wed, Jan 18, 2017 at 7:15 AM, Mitch Altman <maltman23(a)hotmail.com>
>> wrote:
>>
>>> There is a concerted nation-wide effort to get people to believe that
>>> any protest, including Standing Rock, is only happening because everyone
>>> there is paid to be there. The story comes complete with "rumors" that
>>> George Soros is paying for it all.
>>>
>>> Here in Philly (where I've been the past week) I've had conversations
>>> with more than a few peole who told me that family members who voted for
>>> Trump told them that these horrible demonstrators around the county are all
>>> paid to be there.
>>>
>>> Fun times!
>>>
>>> Cheers,
>>> Mitch.
>>>
>>> ------------------------------
>>> *From:* sudo-discuss <sudo-discuss-bounces(a)lists.sudoroom.org> on
>>> behalf of Patrik D'haeseleer <patrikd(a)gmail.com>
>>> *Sent:* Wednesday, January 18, 2017 12:59:13 AM
>>> *To:* Autonomous
>>> *Cc:* sudo-discuss(a)lists.sudoroom.org
>>> *Subject:* Re: [sudo-discuss] Wanted: Activists to fight Trump - full
>>> time pay plus benefits and expenses
>>>
>>> Word is, this offer is likely fake. If anyone has more first-hand
>>> information, please speak up...
>>>
>>> http://www.theverge.com/2017/1/17/14300082/paid-protestor-de
>>> mand-protests-conservative-media-news
>>>
>>> Patrik
>>>
>>> On Tue, Jan 17, 2017 at 5:25 PM, Autonomous <autonomous666(a)gmail.com>
>>> wrote:
>>>
>>>> As a Demand Protest operative you will receive a monthly retainer of
>>>> $2,500 on top of our standard per-event pay of $50/hr, as long as you
>>>> participate in at least 6 events a year. We are extremely flexible and can
>>>> work with almost any existing work schedule. Full-time operatives receive
>>>> health, vision and dental insurance for families, flexible vacations, and
>>>> paid trainings. Travel expenses are always paid.
>>>>
>>>> http://sf.backpage.com/MiscJobs/get-paid-fighting-against-tr
>>>> ump/48800067
>>>>
>>>> Q: Who funds this?
>>>>
>>>>
>>>> _______________________________________________
>>>> sudo-discuss mailing list
>>>> sudo-discuss(a)lists.sudoroom.org
>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>
>>>>
>>>
>>> _______________________________________________
>>> sudo-discuss mailing list
>>> sudo-discuss(a)lists.sudoroom.org
>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>
>>>
>>
>>
>> --
>> *Be seeing you.*
>>
>> _______________________________________________
>> sudo-discuss mailing list
>> sudo-discuss(a)lists.sudoroom.org
>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>
>>
>
--
*Be seeing you.*
attention sudoroom:
do we want to accept a donation of a vinyl cutter which comes with a bunch of
rolls of different colors of vinyl material?
I know noisebridge has one but they also have a lot more space than we do. I
understand the rolls of vinyl take up most of the space.
he says the machine works but it uses a serial interface, and probably windows
software. I think we could easily set up a computer to dedicate to it so it
wouldn't be a barrier to someone who wanted to use it without going through a
software oddysey first.
i'm guessing it looks something like this:
https://productrealization.stanford.edu/content/05-resources/02-processes/1…
On Fri, 9 Dec 2016, Cory Albert wrote:
> Jake: do you know of anyone active in the printed artist's spaces that I
> Cory could donate a big roll of vinyl and vinyl cutters to for sign
> making?
Am here at Hardware Hack Night; was here when Cory and Robb brought in
the donated equipment.
Jake also here and trying to figure out if cutter works and what
adapter(s) and/or cable(s) are necessary to get it up and running.
--
aaronco36
aaronco36@
--
http://www.fastmail.com - mmm... Fastmail...
Just a reminder: We have about 17 or 18 Asus Netbooks for this kind of
projects (classes).
Hilary, Max, and I installed Lubuntu on them about a year ago. Please give
them some use! :)
#daniel
On Wednesday, January 11, 2017, Julio Rios <julio.rios(a)gmail.com> wrote:
> I thought there were weekly meetings (or parties) on Wednesdays, but I
> guess there's only one per month, and January's is today:
> https://sudoroom.org/calendar/
>
> If there isn't a huge rush, it might be better to wait for Feb, when it
> may get better attendance, but maybe some folks will be there tonight.
>
>
> On Wed, Jan 11, 2017 at 3:44 PM Ivan Silva <brito.ivans(a)gmail.com
> <javascript:_e(%7B%7D,'cvml','brito.ivans(a)gmail.com');>> wrote:
>
>> Julio, is there a recurring meeting he can attend/present?
>>
>> On Wed, Jan 11, 2017 at 2:21 PM Julio Rios <julio.rios(a)gmail.com
>> <javascript:_e(%7B%7D,'cvml','julio.rios(a)gmail.com');>> wrote:
>>
>>> Adding other folks who expressed interest. I think we do have a meeting
>>> tonight, but I probably won't be there. Will anyone else on this list?
>>>
>>> Thanks for contacting Rick, Ivan!
>>>
>>>
>>> On Wed, Jan 11, 2017 at 2:14 PM Ivan Silva <brito.ivans(a)gmail.com
>>> <javascript:_e(%7B%7D,'cvml','brito.ivans(a)gmail.com');>> wrote:
>>>
>>>> I contacted Rick. He had this question for Sudo:
>>>> "Does your group have a meeting night where people can do a pitch or
>>>> talk to the members at large?"
>>>>
>>>> LMK
>>>>
>>>> On Mon, Jan 9, 2017, 20:59 danarauz(a)gmail.com
>>>> <javascript:_e(%7B%7D,'cvml','danarauz(a)gmail.com');> <
>>>> danarauz(a)gmail.com <javascript:_e(%7B%7D,'cvml','danarauz(a)gmail.com');>>
>>>> wrote:
>>>>
>>>>> Abel and Ivan,
>>>>>
>>>>> If you are interested in learning more about the project, please, feel
>>>>> free to get in contact with Rick (Rick Abruzzo - rick(a)ricksemail.org).
>>>>>
>>>>> Thanks!
>>>>>
>>>>> #Daniel
>>>>>
>>>>> On Mon, Jan 9, 2017 at 3:37 PM, danarauz(a)gmail.com
>>>>> <javascript:_e(%7B%7D,'cvml','danarauz(a)gmail.com');> <
>>>>> danarauz(a)gmail.com
>>>>> <javascript:_e(%7B%7D,'cvml','danarauz(a)gmail.com');>> wrote:
>>>>>
>>>>>> thanks julio!
>>>>>> #daniel
>>>>>>
>>>>>>
>>>>>> On Monday, January 9, 2017, Julio Rios <julio.rios(a)gmail.com
>>>>>> <javascript:_e(%7B%7D,'cvml','julio.rios(a)gmail.com');>> wrote:
>>>>>>
>>>>>>> Corrected Abe's address.
>>>>>>>
>>>>>>> On Mon, Jan 9, 2017 at 10:48 AM Julio Rios <julio.rios(a)gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Sending to Ivan as he's expressed interest in something like this
>>>>>>>> in the past... and also Abe, who might be interested.
>>>>>>>>
>>>>>>>> -Julio
>>>>>>>>
>>>>>>>> ---------- Forwarded message ---------
>>>>>>>> From: danarauz(a)gmail.com <danarauz(a)gmail.com>
>>>>>>>> Date: Sun, Jan 8, 2017 at 4:14 AM
>>>>>>>> Subject: [sudo-discuss] Fwd: [sudo-info] Makerspace for Oakland
>>>>>>>> Park and Rec
>>>>>>>> To: sudo-discuss <sudo-discuss(a)lists.sudoroom.org>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------- Forwarded message ----------
>>>>>>>> From: danarauz(a)gmail.com <danarauz(a)gmail.com>
>>>>>>>> Date: Sun, Jan 8, 2017 at 4:13 AM
>>>>>>>> Subject: Re: [sudo-info] Makerspace for Oakland Park and Rec
>>>>>>>> To: Rick Abruzzo <rick(a)ricksemail.org>
>>>>>>>>
>>>>>>>>
>>>>>>>> Hello Rick,
>>>>>>>>
>>>>>>>> I am sorry for this delay to acknowledge your email if you have not
>>>>>>>> received any replies. Regardless, I am forwarding your email to the main
>>>>>>>> discuss list.
>>>>>>>>
>>>>>>>> I hope someone will get back to you soon!
>>>>>>>>
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> #daniel
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Dec 16, 2016 at 12:30 PM, Rick Abruzzo <rick(a)ricksemail.org
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> Hello Sudo
>>>>>>>>>
>>>>>>>>> I'm reaching out to you today because I have been given the
>>>>>>>>> opportunity to submit a proposal to Oakland Park and Rec to turn a park
>>>>>>>>> facility into a makerspace/workshop, mostly oriented towards programming
>>>>>>>>> for children and their families, in the surrounding community. Jonathan
>>>>>>>>> Foote and Mitch Altman suggested your organization as a potential partner
>>>>>>>>> and I would like to sit down with your team and discuss ideas on how best
>>>>>>>>> to proceed.
>>>>>>>>>
>>>>>>>>> If your organization has interest in being part of this endeavor,
>>>>>>>>> please let me know and we can setup a meeting in the immediate future.
>>>>>>>>>
>>>>>>>>> Thank you for your time and consideration.
>>>>>>>>>
>>>>>>>>> Sincerely,
>>>>>>>>> Rick Abruzzo
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> FIGMENT Oakland: oakland.figmentproject.org
>>>>>>>>> Oakland Awesome Foundation: awesomefoundation.
>>>>>>>>> org/en/chapters/oakland/
>>>>>>>>> <http://www.awesomefoundation.org/en/chapters/oakland/>
>>>>>>>>> Dancehall of Beautiful Radiant Things: dancehallofbeautifulra
>>>>>>>>> diantthings.com
>>>>>>>>>
>>>>>>>>> Facebook <https://www.facebook.com/rick.abruzzo> | Instagram
>>>>>>>>> <https://www.instagram.com/rickinthe510/> | Twitter
>>>>>>>>> <https://twitter.com/rickabruzzo>
>>>>>>>>>
>>>>>>>>> Portfolio <http://ricksproductionportfolio.com>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Info mailing list
>>>>>>>>> Info(a)lists.sudoroom.org
>>>>>>>>> https://sudoroom.org/lists/listinfo/info
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Daniel
>>>>>>>>
>>>>>>>> Signal: 415.336.9143 <https://whispersystems.org/>
>>>>>>>>
>>>>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>>>>> - - - - - - - - - - - - - - - - -
>>>>>>>> Help open a people-powered common space in Oakland, California!
>>>>>>>> https://omnicommons.org/donate
>>>>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>>>>> - - - - - - - - - - - - - - - - -
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Daniel
>>>>>>>>
>>>>>>>> Signal: 415.336.9143 <https://whispersystems.org/>
>>>>>>>>
>>>>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>>>>> - - - - - - - - - - - - - - - - -
>>>>>>>> Help open a people-powered common space in Oakland, California!
>>>>>>>> https://omnicommons.org/donate
>>>>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>>>>> - - - - - - - - - - - - - - - - -
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sudo-discuss mailing list
>>>>>>>> sudo-discuss(a)lists.sudoroom.org
>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> Daniel
>>>>>>
>>>>>> Signal: 415.336.9143 <https://whispersystems.org/>
>>>>>>
>>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>>> - - - - - - - - - - - - - - - -
>>>>>> Help open a people-powered common space in Oakland, California!
>>>>>> https://omnicommons.org/donate
>>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>>> - - - - - - - - - - - - - - - -
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Daniel
>>>>>
>>>>> Signal: 415.336.9143 <https://whispersystems.org/>
>>>>>
>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>> - - - - - - - - - - - - - - -
>>>>> Help open a people-powered common space in Oakland, California!
>>>>> https://omnicommons.org/donate
>>>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>>>> - - - - - - - - - - - - - - -
>>>>>
>>>>>
>>>>> --
>>>>
>>>> ~typed with thumbs~
>>>>
>>> --
>>
>> ~typed with thumbs~
>>
>
--
Daniel
Signal: 415.336.9143 <https://whispersystems.org/>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Hello Sudoroom,
Jake Spaz mentioned there was some discussion on this list about the Makerspace and suggested I join so you can ask me questions directly. I'm going to include here the update I sent to the interested parties earlier today so you can have a clear idea of where we are at and what the current challenges are:
Hey all,
I wanted to give you an update on the Maker Space. Myself and Erin Burton, the director of Mosswood Park, were hoping to have access to 'the barn' by now but as it stands its still fenced off, even though its structurally sound. This is just to keep people away from the Rec center which is a burnt husk. I think first important step in building a proposal is getting a tour of the building and seeing what already exists and what we can do with it. Unfortunately Oakland DPW isn't promising access to the Barn till late March, mid April. Erin can enter it but she can't bring guests.
Also I have made contact with Sudoroom and they have an open forum meeting the 2nd Wednesday of the month which I hope to attend in February to give a pitch. I have not heard back from Ace Toy Monster or Mothership Hackermoms. If you know anyone over there you can poke to see if there are members willing to contribute to the proposal or commit to a build out once the proposal is approved, that would be most welcome.
Erin already mentioned the makerspace to DPW and they grumbled and said no. Erin says we should ignore this and I agree. Any DPW in any city in the world's main job is to say no, even if it doesn't draw from their resources because from their point of view any changes to anything single thing, even the changing of the wind, effects their resources. DPW isn't tasked on building a community, we are, so froward we march.
If you have any suggestions on how to best utilize our time till we can gain access to the Barn, I'm open to suggestions.
Thank you for your time and your patience, if you have any questions please don't hesitate to reach out.
always,
RICK!
--
FIGMENT Oakland: oakland.figmentproject.org
Oakland Awesome Foundation: awesomefoundation.org/en/chapters/oakland/
Dancehall of Beautiful Radiant Things: dancehallofbeautifulradiantthings.com
Facebook | Instagram | Twitter
Portfolio
anyone ever hear of a dvi-m1 male to dvi-m1 male cable?
i'm coming up with nothing &
need one for an aja kona3 breakout box (k3-box)
can you imagine splicing 30 wires?
Any folks interested in being part of this endeavor?
#daniel
---------- Forwarded message ----------
From: Rick Abruzzo <rick(a)ricksemail.org>
Date: Mon, Jan 9, 2017 at 10:17 AM
Subject: Re: [sudo-info] Makerspace for Oakland Park and Rec
To: danarauz <danarauz(a)gmail.com>
Hello Daniel,
Thank you for following up. I have not yet received a reply from anyone at
Sudo Box but look forward to hearing from you and working to figure out how
we can work together.
Sincerely,
Rick Abruzzo
--
FIGMENT Oakland: oakland.figmentproject.org
Oakland Awesome Foundation: awesomefoundation.org/en/chapters/oakland/
<http://www.awesomefoundation.org/en/chapters/oakland/>
Dancehall of Beautiful Radiant Things: dancehallofbeautifulradiantthings.com
Facebook <https://www.facebook.com/rick.abruzzo> | Instagram
<https://www.instagram.com/rickinthe510/> | Twitter
<https://twitter.com/rickabruzzo>
Portfolio <http://ricksproductionportfolio.com>
---- On Sun, 08 Jan 2017 04:13:45 -0800 *<danarauz(a)gmail.com
<danarauz(a)gmail.com>>* wrote ----
Hello Rick,
I am sorry for this delay to acknowledge your email if you have not
received any replies. Regardless, I am forwarding your email to the main
discuss list.
I hope someone will get back to you soon!
Thanks!
#daniel
On Fri, Dec 16, 2016 at 12:30 PM, Rick Abruzzo <rick(a)ricksemail.org> wrote:
--
Daniel
Signal: 415.336.9143 <https://whispersystems.org/>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Hello Sudo
I'm reaching out to you today because I have been given the opportunity to
submit a proposal to Oakland Park and Rec to turn a park facility into a
makerspace/workshop, mostly oriented towards programming for children and
their families, in the surrounding community. Jonathan Foote and Mitch
Altman suggested your organization as a potential partner and I would like
to sit down with your team and discuss ideas on how best to proceed.
If your organization has interest in being part of this endeavor, please
let me know and we can setup a meeting in the immediate future.
Thank you for your time and consideration.
Sincerely,
Rick Abruzzo
--
FIGMENT Oakland: oakland.figmentproject.org
Oakland Awesome Foundation: awesomefoundation.org/en/chapters/oakland/
<http://www.awesomefoundation.org/en/chapters/oakland/>
Dancehall of Beautiful Radiant Things: dancehallofbeautifulradiantthings.com
Facebook <https://www.facebook.com/rick.abruzzo> | Instagram
<https://www.instagram.com/rickinthe510/> | Twitter
<https://twitter.com/rickabruzzo>
Portfolio <http://ricksproductionportfolio.com>
_______________________________________________
Info mailing list
Info(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/info
--
Daniel
Signal: 415.336.9143 <https://whispersystems.org/>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Do we happen to have a pipe bender at Omni somewhere? Need to adjust some
electrical conduit.
Not absolutely required, but it'd look better with all the bends on the
right places. ..
Patrik
S/re-entering/re-centering ^_^
On Jan 14, 2017 12:29 AM, "Jenny Ryan" <tunabananas(a)gmail.com> wrote:
Thanks for that link, Julio, and Hol for re-entering sudo's ethical core of
social justice!
If you're interested in supporting the current uptick in requests for
Omni's support in activist endeavors, we've formulated an informal
'organize' working group to field relevant space requests, requests for
collaboration and resources etc that had been meeting weekly on Wednesdays
at 6pm prior to the ghost ship tragedy and holidaze. To connect subscribe
to the list at omnicommons.org/lists/listinfo/organize
If people would like to make some arts or contribute funds, Dionne Smith is
an amazing woman fighting for police accountability and specifically
justice for her son, James Rivera, who was murdered by Stockton PD in 2010.
She is currently raising funds to bring her powerful voice to DC and
perhaps we could blast this out / contribute $$ / make something awesome to
send her off with: https://www.gofundme.com/6n-womens-march-on-washington
I'll be editing some footage I took of Dionne speaking at Gilda Baker's
press conference last October (Gilda's son, Diallo Neal, was murdered by
CHP in a hit & run in 2005 and she is only now finding the support she's
needed to speak out) when I get home in a few days... editing support would
be rad as I'm hella rusty.
Mad love,
On Jan 14, 2017 12:02 AM, "Julio Rios" <julio.rios(a)gmail.com> wrote:
> I think the organizers of these marches have good intentions, but there
> are also many valid concerns worth mentioning:
> http://www.brittanytoliver.com/blog/2017/1/11/whats-next-aft
> er-the-marches-organize
>
> I would not support sudo or the Omni blanketly supporting this effort
> without mentioning the problematic aspects.
>
> On Fri, Jan 13, 2017 at 12:03 PM <hol(a)gaskill.com> wrote:
>
>> Anyone participating in either of these next weekend and want to make
>> some banners at sudo? Could be an addendum/theme to hack night.
>> _______________________________________________
>> sudo-discuss mailing list
>> sudo-discuss(a)lists.sudoroom.org
>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>
>
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss(a)lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/sudo-discuss
>
>
We need a SudoRoom wiki page on trains. Many members are huge train
enthusiasts, taking the Capitol Corridor to work on the South Bay or the
Caltrain. A lot of SudoRoom members regularly Amtrak their way to hacker
conferences all over the country!
Nerds are fierce bike and Caltrain advocates in Silicon Valley, and they
are known to pelt well meaning but surprised officials with elaborate
spreadsheets explaining the lower cost per rider of a bike train place than
a parking spot place. It'd be cool to see more hacker advocacy, as local
trains have increased service this year on the Amtrak due to higher
ridership.
Preliminary Wondering[edit
<https://sudoroom.org/mediawiki/index.php?title=Movement/Trains&action=edit&…>
]
- How do trains work?
- Are trains still hackable?
- What ever happened to model trains building and collecting? How will
we live with ourselves until the 2019, when the model train section
<http://www.deutsches-museum.de/en/exhibitions/transport/model-railway/> of
the Deutsches Museum is open for the public again?
- Will the USA ever get the gleaming speed trains being put up with
blinding speed in China?
- Has anyone ever tried to illegally hack together a new railways system
in some kind of squatter/burning man area or interesting part of town?
- Some people are building handmade railcars to explore abandoned
railway systems at the TechShop - Neat!
http://www.instructables.com/id/Railcar-Project-Techshop/https://sudoroom.org/wiki/Movement/Trains
=============================
Romy Ilano
romy(a)snowyla.com
Hey Sudoers,
I came by Sudo Room Wednesday and dropped off a donation of 13 Mac Minis!
They were donated by Liz from Mozilla. Some other hackerspaces also got some including Noisebridge.
Specs: mid-2010 model, Core 2 Duo cpu, 4 or 8GB RAM, 320 GB HD (wiped clean), DVD-RW drive, HDMI video out.
They are missing power cables (but they're standard and power is built-in).
They'll work with the latest Mac OS - just need to be installed. Or you can install Linux.
https://en.wikipedia.org/wiki/Mac_Mini#Specifications_3
Enjoy!
-Carl G
Hey everyone,
I'm excited about Hardware hack night. I'm continuing my connected car hack
(using the automatic API) so I can track my car and do fun experiments:
https://sudoroom.org/wiki/Movement
I'm going to focus on completing a project and having something to present
by the next meeting, and giving tips on how I did it.
In the future I'd like to:
- Encourage people who drive cars to exercise more
- Find ways to enable people to ride the Amtrack more by make tools that
solve the last mile problem, since we sorely need more rail in the East Bay
- explore topics around hacking wheelchairs.
Best,
Romy
=============================
Romy Ilano
romy(a)snowyla.com
How do we feel about paper towel dispensers at the Omni? Are we
intentionally doing without, to save some trees? Are people worried the
paper towel roll will get stolen? Or have we just not bothered putting any
up yet?
I'm planning to get one for our lab sink in CCL, but I'd love to have one
in each bathroom at the Omni.
Touchless towel dispensers start at $25 at Office Depot. There's probably
better places to get them too...
Patrik
PS: Ditto for wall-mounted soap dispensers...
fyi
#daniel
On Fri, Dec 16, 2016 at 5:23 PM, Sudo Room <info(a)sudoroom.org> wrote:
> (Pseudo)nym or Name: Adam Flynn
> Email: adamwflynn(a)gmail.com
> Why do you want to be a member of sudo room?: I've been working from
> home, and instead fretting about the state of the world. So instead, I'd
> like to have a place to both 1) do my day job, and 2) plan, organize, and
> bring the new world into being. (This may depend on the viability of Sudo
> room as a workspace...If it's less viable I may just become a more sporadic
> member.)
> If you know already, what are you excited to do at sudo room?: Build out
> infosec and opsec capacities, ask dumb math and science questions,
> whiteboard furiously.
> If you know already, what are you excited to share with the sudo room
> community?: Historical thoughts on technology and the shape of social
> change, and also the concept of "solarpunk" which I kinda helped popularize.
> Have you ever been banned from another hackerspace? If so, when and why?: Nope!
> Also if you need endorsements of character, you can ask Johannes from
> Monochrom.
> _______________________________________________
> Info mailing list
> Info(a)lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/info
>
>
--
Daniel
Signal: 415.336.9143 <https://whispersystems.org/>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Hello Mike, not sure if you have been contacted regarding your application,
but I am forwarding to our main discussion email.
I hope someone would reply to you soon! And if you hear or not from anyone,
I highly recommend that you stop by Sudoroom and introduce yourself, and
start hanging there to know folks, and for folks to get to know as well.
Thanks!
#daniel
On Tue, Dec 13, 2016 at 9:18 AM, Sudo Room <info(a)sudoroom.org> wrote:
> (Pseudo)nym or Name: Michael Huang
> Email: mike(a)htwins.net
> Why do you want to be a member of sudo room?: I want to meet people with
> similar interests and also learn to solder
> If you know already, what are you excited to do at sudo room?: Solder
> If you know already, what are you excited to share with the sudo room
> community?: Friendship and money
> Have you ever been banned from another hackerspace? If so, when and why?: I
> have never been to a hackerspace
> _______________________________________________
> Info mailing list
> Info(a)lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/info
>
>
--
Daniel
Signal: 415.336.9143 <https://whispersystems.org/>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -