Re: [sudo-discuss] [omni-building] [omni-discuss] Door card access temporarily broken

Any progress on fixing door access? I'm already hearing people talk

making a bunch more physical keys, which I think is a solution we really want to avoid... I know this is not a popular opinion around here, but I would still be

favor of adopting a commercial door access solution - possibly

maintenance contract so we can get it fixed same day if something goes wrong. Patrik On Sun, Jun 4, 2017 at 9:47 PM, Julio Rios <julio.rios(a)gmail.com>

> I tried the same thing with Robb and still no go. > > On Sat, Jun 3, 2017, 14:47 danarauz(a)gmail.com <danarauz(a)gmail.com>

> >> A quick note: there is a network cable that comes from the top of the >> ceiling above the door (as I recall its blue and its rolled up) that

>> terminated but the other end it's plugged into the switch at the

>> floor. >> >> It you want, it can be used for the door, it seems more reliable and >> safer than the current network cable setup in use. The current setup

>> to the floor and plugs into an small switch that often folks >> accidentally disconnect. >> >> Thx! >> >> >> >> >> >> >> On Saturday, June 3, 2017, robb <sf99er(a)gmail.com> wrote: >> >>> Still not working though >>> On Jun 3, 2017 2:07 PM, "robb" <sf99er(a)gmail.com> wrote: >>> >>>> Unplug/plug usb cables from 12v cig adapter. Done >>>> On Jun 3, 2017 1:51 PM, "Jake" <jake(a)spaz.org> wrote: >>>> >>>>> in order to get the system to work, you really need to do a power >>>>> cycle of the >>>>> whole system. If you don't do it exactly this way, it won't work, >>>>> even back >>>>> when the system was fine: >>>>> >>>>> open the big cabinet door with the battery and beaglebone and voip

>>>>> in it, >>>>> locate the two-USB power socket (a car cigarette lighter USB charge >>>>> socket >>>>> wired to the battery) and you'll see that it has TWO USB-A plugs

>>>>> >>>>> unplug BOTH USB-A cables from the round USB socket thing, wait at >>>>> least ten >>>>> seconds, and then plug them both back in. One powers the

>>>>> the other >>>>> powers the powered USB hub. >>>>> >>>>> If you don't do it this way, the card reader and beaglebone won't

>>>>> to each >>>>> other :( >>>>> >>>>> and that's assuming that everything is fine hardware-wise. >>>>> >>>>> -jake >>>>> >>>>> On Sat, 3 Jun 2017, robb wrote: >>>>> >>>>> New reader installed. Green light blinks after reading card but

>>>>>> not >>>>>> responding >>>>>> On Jun 3, 2017 12:07 PM, "Charley Sheets" <rcsheets(a)acm.org>

>>>>>> >>>>>> On Thu, 1 Jun 2017 19:23:21 -0700 (PDT) >>>>>>> Jake <jake(a)spaz.org> wrote: >>>>>>> >>>>>>> thanks Charley! >>>>>>>> >>>>>>>> we have a few readers but there seems to be some problem that

>>>>>>>> not be the reader. i'll take a look and let you know! >>>>>>>> >>>>>>> >>>>>>> It's mainly the card reader and a beaglebone or something, right? >>>>>>> >>>>>>> -- >>>>>>> Charley Sheets >>>>>>> >>>>>>> _______________________________________________ >>>>>>> sudo-discuss mailing list >>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>> >>>>>>> >>>>>>> >>>>>> >> >> -- >> Daniel >> >> Signal: 415.336.9143 <(415)%20336-9143> <https://whispersystems.org/> >> >> WhatsApp: 415.336.9143 <(415)%20336-9143> <https://www.whatsapp.com/

>> >> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

>> - - - - - - - - - - - - - - >> Help open a people-powered common space in Oakland, California! >> https://omnicommons.org/donate >> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -