I'll volunteer to take apart the microwave (see
them on the street all the
time). Never taken apart a microwave before.
On Aug 25, 2016 2:32 PM, "Jake" <jake(a)spaz.org> wrote:
this is definitely a decent way to do it.
microwave transformers are constructed with all the E's on one side and
all the I's on the other, and then welded together with a thin bead. This
means that using an angle grinder with an abrasive cutting disk (and safety
gear!) you can cut the weld so that you can remove the bottom of the
transformer. Then you remove the high-voltage winding and install another
primary winding with a similar number of turns as the original primary. If
you have two identical microwave oven transformers (MOTs) you can just open
both and move the primary from one to the other.
If you add a variac you can tune the voltage, but you could also do that
by putting multiple connections along the last part of one of the
primaries, and then a rotary switch to select between them.
the important part is that the transformer isolates the equipment so that
people are less likely to die in your hackerspace.
On Thu, 25 Aug 2016, Cere Misc wrote:
Take apart a microwave and use it’s core to create a isolated set of
> windings at whatever ratio then connect it to a variac?
>
> On Wed, Aug 24, 2016 at 3:58 PM, Jake <jake(a)spaz.org> wrote:
>
>
https://en.wikipedia.org/wiki/Voltage_regulator#Constant-vol
>> tage_transformer
>>
>> On Wed, 24 Aug 2016, hol(a)gaskill.com wrote:
>>
>> Just out of curiosity, can you share a bit more about waveform
>>
>>> distortion? Was just looking at schematics for a 12-pulse converter and
>>> different winding configurations
>>>
https://en.wikipedia.org/wiki/HVDC_converter#Twelve-pulse_bridge
>>> On 2016-08-19 01:24, robb wrote:
>>>
>>> ty for trying to save my life, jake
>>>
>>>>
>>>> On Thu, Aug 18, 2016 at 11:05 PM, Jake <jake(a)spaz.org> wrote:
>>>>
>>>> does sudoroom have an isolation transformer? it's something that
plugs
>>>>
>>>>> into a regular outlet and outputs the same voltage, but it's
>>>>> isolating.
>>>>>
>>>>> we have a couple of universal AC converter boxes which provide
240VAC
>>>>> when you plug them into 120VAC but they are
"autotransformers" and
>>>>> they
>>>>> don't isolate.
>>>>>
>>>>> I want us to have an isolating transformer so that when people
>>>>> experiment with AC-powered devices, they are much less likely to
>>>>> suffer a
>>>>> lethal shock and die.
>>>>>
>>>>> note: some voltage-regulator transformers are isolating, but since
>>>>> they distort the waveform in order to achieve the voltage
>>>>> stabilizing, they
>>>>> are not ideal for our purposes.
>>>>>
>>>>> thank you,
>>>>> -jake
>>>>> _______________________________________________
>>>>> sudo-discuss mailing list
>>>>> sudo-discuss(a)lists.sudoroom.org
>>>>>
https://sudoroom.org/lists/listinfo/sudo-discuss [1]
>>>>>
>>>>>
>>>> _______________________________________________
>>>> sudo-discuss mailing list
>>>> sudo-discuss(a)lists.sudoroom.org
>>>>
https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>
>>>>
>>>
>>> Links:
>>> ------
>>> [1]
https://sudoroom.org/lists/listinfo/sudo-discuss
>>>
>>> _______________________________________________
>> sudo-discuss mailing list
>> sudo-discuss(a)lists.sudoroom.org
>>
https://sudoroom.org/lists/listinfo/sudo-discuss
>>
>>