Re: [sudo-discuss] Door card access temporarily broken

Unplug/plug usb cables from 12v cig adapter. Done On Jun 3, 2017 1:51 PM, "Jake" <jake(a)spaz.org> wrote: > in order to get the system to work, you really need to do a power cycle > of the > whole system. If you don't do it exactly this way, it won't work, even > back > when the system was fine: > > open the big cabinet door with the battery and beaglebone and voip box in > it, > locate the two-USB power socket (a car cigarette lighter USB charge socket > wired to the battery) and you'll see that it has TWO USB-A plugs in it. > > unplug BOTH USB-A cables from the round USB socket thing, wait at least > ten > seconds, and then plug them both back in. One powers the beaglebone, the > other > powers the powered USB hub. > > If you don't do it this way, the card reader and beaglebone won't talk to > each > other :( > > and that's assuming that everything is fine hardware-wise. > > -jake > > On Sat, 3 Jun 2017, robb wrote: > > New reader installed. Green light blinks after reading card but lock not >> responding >> On Jun 3, 2017 12:07 PM, "Charley Sheets" <rcsheets(a)acm.org> wrote: >> >> On Thu, 1 Jun 2017 19:23:21 -0700 (PDT) >>> Jake <jake(a)spaz.org> wrote: >>> >>> thanks Charley! >>>> >>>> we have a few readers but there seems to be some problem that might >>>> not be the reader. i'll take a look and let you know! >>>> >>> >>> It's mainly the card reader and a beaglebone or something, right? >>> >>> -- >>> Charley Sheets >>> >>> _______________________________________________ >>> sudo-discuss mailing list >>> sudo-discuss(a)lists.sudoroom.org >>> https://sudoroom.org/lists/listinfo/sudo-discuss >>> >>> >>> >>