7 Aug
2013
7 Aug
'13
9:35 p.m.
thank you guys!
is the 3d printer available for anyone to use now? do we need new
documentation for those who'd like to use it?
- marina
On Wed, Aug 7, 2013 at 7:15 PM, Hol Gaskill <hol(a)gaskill.com> wrote:
OK didn't turn out perfect but I have some results
to use in refining the
model for printability.
Thanks again, dan!
Aug 7, 2013 04:03:24 PM, somniac(a)me.com wrote:
I've done it! Here's the rundown:
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-discuss
Previously your host software was probably "Repetier-Host", which was a
nice little suite with the slicer and host software in one package. Now
things are a little different:
First you'll use KISSlicer to slice an .stl model into your .gcode file,
then
you'll open PronterFace, where you can load that .gcode file and tell
the printer to print it. It's actually fairly similar, all the same
general functions, just in two pieces of software.
Good luck!
-Dan
On Aug 7, 2013, at 11:24 AM, Hol Gaskill hol(a)gaskill.com> wrote:
> Hi Folks,
>
> Who has used the 3D printer since the host computer was re-imaged or
knows
where to find documentation on how to use it posted somewhere? I
used the old one frequently but it was in a windows environment, tried to
show someone how to use it the other day and was dumbfounded. Trying to
print out some intake strainers to keep pumps from sucking in duckweed.
Cheers,
Hol
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-discuss