5 Jun
2017
5 Jun
'17
2:18 p.m.
i'll come fix it
On Mon, 5 Jun 2017, Patrik D'haeseleer wrote:
Any progress on fixing door access? I'm already
hearing people talk about
making a bunch more physical keys, which I think is a solution we really
want to avoid...
I know this is not a popular opinion around here, but I would still be in
favor of adopting a commercial door access solution - possibly including a
maintenance contract so we can get it fixed same day if something goes
wrong.
Patrik
On Sun, Jun 4, 2017 at 9:47 PM, Julio Rios <julio.rios(a)gmail.com> wrote:
I tried the same thing with Robb and still no
go.
On Sat, Jun 3, 2017, 14:47 danarauz(a)gmail.com <danarauz(a)gmail.com> wrote:
A quick note: there is a network cable that comes
from the top of the
ceiling above the door (as I recall its blue and its rolled up) that is not
terminated but the other end it's plugged into the switch at the second
floor.
It you want, it can be used for the door, it seems more reliable and
safer than the current network cable setup in use. The current setup goes
to the floor and plugs into an small switch that often folks
accidentally disconnect.
Thx!
On Saturday, June 3, 2017, robb <sf99er(a)gmail.com> wrote:
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
Still not working though
On Jun 3, 2017 2:07 PM, "robb" <sf99er(a)gmail.com> wrote:
> Unplug/plug usb cables from 12v cig adapter. Done
> On Jun 3, 2017 1:51 PM, "Jake" <jake(a)spaz.org> wrote:
>
>> in order to get the system to work, you really need to do a power
>> cycle of the
>> whole system. If you don't do it exactly this way, it won't work,
>> even back
>> when the system was fine:
>>
>> open the big cabinet door with the battery and beaglebone and voip box
>> in it,
>> locate the two-USB power socket (a car cigarette lighter USB charge
>> socket
>> wired to the battery) and you'll see that it has TWO USB-A plugs in it.
>>
>> unplug BOTH USB-A cables from the round USB socket thing, wait at
>> least ten
>> seconds, and then plug them both back in. One powers the beaglebone,
>> the other
>> powers the powered USB hub.
>>
>> If you don't do it this way, the card reader and beaglebone won't talk
>> to each
>> other :(
>>
>> and that's assuming that everything is fine hardware-wise.
>>
>> -jake
>>
>> On Sat, 3 Jun 2017, robb wrote:
>>
>> New reader installed. Green light blinks after reading card but lock
>>> not
>>> responding
>>> On Jun 3, 2017 12:07 PM, "Charley Sheets" <rcsheets(a)acm.org>
wrote:
>>>
>>> On Thu, 1 Jun 2017 19:23:21 -0700 (PDT)
>>>> Jake <jake(a)spaz.org> wrote:
>>>>
>>>> thanks Charley!
>>>>>
>>>>> we have a few readers but there seems to be some problem that might
>>>>> not be the reader. i'll take a look and let you know!
>>>>>
>>>>
>>>> It's mainly the card reader and a beaglebone or something, right?
>>>>
>>>> --
>>>> Charley Sheets
>>>>
>>>> _______________________________________________
>>>> sudo-discuss mailing list
>>>> sudo-discuss(a)lists.sudoroom.org
>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>
>>>>
>>>>
>>>
--
Daniel
Signal: 415.336.9143 <https://whispersystems.org/>
WhatsApp: 415.336.9143 <https://www.whatsapp.com/download/>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
_______________________________________________
discuss mailing list
discuss(a)lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss