1 Jul
2015
1 Jul
'15
6:55 p.m.
I'm excited. That was a $5,000,000 machine at one point.
On Jul 1, 2015 6:10 PM, "Patrik D'haeseleer" <patrikd(a)gmail.com>
wrote:
Hm - "refurbished by refilling the reservoir with
Gallium". That sounds
like a DIY job if I ever heard one! I happen to have some Gallium sitting
right here...
Patrik
On Wed, Jul 1, 2015 at 5:55 PM, Nathan McCorkle <nmz787(a)gmail.com> wrote:
Also, here's a link to a 'quote' on a
new source... I've heard how
much these usually cost before, but I can't remember exactly at the
moment. I think around $2-4k:
https://www.appliedbeams.com/product/gallium-lmis-refill-for-seiko-fib-syst…
Here's a good primer on FIB I just found when searching for the
average lifetime of the Gallium source:
(warning 159MB)
http://www.emal.engin.umich.edu/courses/FIB%20Workshop%202008/FIB%20Worksho…
On Wed, Jul 1, 2015 at 5:48 PM, Nathan McCorkle <nmz787(a)gmail.com> wrote:
want
this
--
-Nathan
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
On Wed, Jul 1, 2015 at 5:39 PM, Patrik
D'haeseleer <patrikd(a)gmail.com>
wrote:
> DOH! Thank Nathan - that would be a huge
difference. I got fooled by
the
> fact that the several listings on
caeonline.com all call it a FIB SEM
> system:
>
> http://www.caeonline.com/listing/product/9095358/seiko-smi-3200
> http://www.caeonline.com/listing/product/67711/seiko-smi-3200
> http://www.caeonline.com/listing/product/9025735/seiko-smi-3200
>
> Don't these things usually allow some secondary electron imaging as
well
though?
Yes, the imaging electronics is the same as a scanning electron
microscope, the beam scan electronics probably a bit different but
mostly the same ideas (using electrical or magnetic fields to scan the
beam).
>
> If it doesn't have any imaging capabilities, I doubt that we would beast.
Would be good to check this with the owner though...
Yep, I'm guessing this has imaging... it would be pretty hard to focus
to <5nm without some feedback to check edges for!